A geologic study of the Juan del Grijalva landslide,the most important mass movement during the last century in Mexico

On November 4th 2007, along the Grijalva River in the state of Chiapas, Mexico, has occurred one of the largest landslides ever known. This landslide, known as Juan del Grijalva, destroyed the town of the same name, killing 20 people, and moved 55 million cubic meters of rock and debris down slope to completely block the Grijalva River. In order to understand the characteristics and factors that triggered the Juan del Grijalva landslide, geologic studies were conducted at the site. The results indicate that the landslide was composed of a lithologic sequence of thin-bedded shales and thin to medium-thick-bedded sandstones. This was faulted into several blocks dipping in the same sense as the mass movement. The main triggering factor was the increment of the pore pressure into the lithologic unit due to water saturation after 5 days of heavy rain before the incident. According to records from the last century, the Juan del Grijalva mass movement represents one of the largest mass movements recorded all over the world. The risk conditions of the area after the landslide lead to the rapid construction of an artificial channel to drain the accumulating mass of water upstream and therefore prevent a future catastrophic inundation down stream.     

Extending the double-difference location technique to mining applications part I: Numerical study

The location of the seismic event hypocenter is the very first task undertaken when studying any seismological problem. The accuracy of the solution can significantly influence consecutive stages of analysis, so there is a continuous demand for new, more efficient and accurate location algorithms. It is important to recognize that there is no single universal location algorithm which will perform equally well in any situation. The type of seismicity, the geometry of the recording seismic network, the size of the controlled area, tectonic complexity, are the most important factors influencing the performance of location algorithms. In this paper we propose a new location algorithm called the extended double difference (EDD) which combines the insensitivity of the double-difference (DD) algorithm to the velocity structure with the special demands imposed by mining: continuous change of network geometry and a very local recording capability of the network for dominating small induced events. The proposed method provides significantly better estimation of hypocenter depths and origin times compared to the classical and double-difference approaches, the price being greater sensitivity to the velocity structure than the DD approach. The efficiency of both algorithms for the epicentral coordinates is similar.     

Strain analysis and stratigraphic status of Nongkhya,Sumer and Mawmaram conglomerates of Shillong basin,Meghalaya, India

Shillong basin, one of the Purana basins of the Indian peninsula is situated in the central and eastern parts of the Shillong plateau of NE India. Metasedimentary and metavolcanic rocks of the basin are of Mesoproterozoic age and lithostratigraphically belong to Shillong Group (erstwhile Shillong series) comprising Lower Metapelitic Formation (LMF) and Upper Quartzitic Formation (UQF). A long, persistent, faulted and tectonically attenuated conglomerate known as Nongkhya-Sumer-Mawmaram-conglomerate separates these two formations. In the present work, quantitative strain analyses of the pebbles of Sumer, Nongkhya and Mawmaram conglomerates of Ri-Bhoi and West Khasi Hills districts of Meghalaya are carried out using manual and computerized programmes. Eight different techniques for intrapebble, interpebble and bulk rock strain estimation are applied and results are compared systematically. Sumer and Mawmaram conglomerates bear the testimony of broadly flattening type of deformation (0 < k < 1) while Nongkhya conglomerate shows constriction type (1 < k < α). The change in strain ellipsoid shape from Nongkhya to Mawmaram area is accompanied by a change of fabric from S < L to L < S tectonites. Affinity of rotational strain is more in Nongkhya conglomerate as compared to Sumer and Mawmaram conglomerates. The compactness of pebbles is high in case of Nongkhya conglomerate and low to moderate in Sumer and Mawmaram conglomerates indicating high strain in Nongkhya conglomerate (northeastern part of Shillong basin) relative to Sumer and Mawmaram conglomerates (southwestern part of Shillong basin). Thus strain magnitude increases from SW to NE direction of the Shillong basin.     

Magnetotelluric sounding results in eastern Tibetan Plateau

The results of Zayü-Qingshuihe MT sounding profile carried out in eastern Tibetan Plateau are presented in this paper. Using 2-D RRI method, the resistivity distribution with depth is obtained along the profile. It is featured by the resistivity zones in the horizontal direction and layers in the vertical direction. The Bangong-Nujiang suture zone and Jinshajiang suture zone are both important electrical conductivity-separating zones in the plateau, and the former is a zone with relatively low resistivity while the latter is an electrical conductivity gradient zone. The highly electrical conductive bodies in the mid and lower crust of northern Qiangtang and Bayan Har Terrain might be caused by regional melting due to shear heating during the process of subduction in tectonic evolution.     

Set-asides for carbon sequestration: implications for permanence and leakage

This paper examines the potential role of forest set-asides in global carbon sequestration policy. While set asides that protect forests from timber harvests and land-use conversion may alleviate concerns with permanence, and they may provide large ancillary environmental benefits, they may also lead to large leakage. This paper uses a global land use and forestry model to examine the efficiency of three crediting schemes for set-asides. The results show that if set-asides are integrated into a global forestry carbon sequestration program that includes a wide range of other management options, then 300 million hectares of land would be set-aside, and up to 128 Pg C could be sequestered in global forests by 2105. Under alternative policies that focus exclusively on set-asides, more forestland can be set-asides, up to 3.2 billion hectare, but these policies invite large leakage in the near-term, and in the long-run, they less net carbon is removed from the atmosphere. Specifically, leakage is estimated to be 47–52%, depending on the policy, and by the end of the century, up to 17% less carbon will be sequestered in all forests.     

Recession of Milam Glacier,Kumaun Himalaya,Observed via Lichenometric Dating of Moraines

Glaciers being very sensitive to climate change have been identified as one of the best indicators of climate change and evidences have proved that most of the Himalayan glaciers have receded with an increased rate during the recent past under the influence of global warming. Lichenometric study was carried out on the moraines of Milam glacier (located in Pithoragarh district of Uttarakhand) with the help of lichen species Dimelaena oreina having an average annual growth rate of 1.31 mm. The study revealed that Milam glacier has receded 1450 m in last 69.37 years with an average recession rate of 20.90 m/year. Since lichenometric studies are cost effective and ecofriendly in comparison to carbon dating, satellite and remote sensing based studies and also reliable, hence, it should be promoted in Himalaya which is an abode of glaciers.     

High resolution facies record on late Holocene flood plain sediments from lower reaches of Narmada Valley,Western India

A high resolution quantitative granulometric record for site Uchediya [21°43′2.22″ N, 73° 6′26.22″ E; 10 m a. s. l.] gives understanding towards accretion history of the late Holocene flood plain in the lower reaches of Narmada River. Two sediment facies (sandy and muddy) and seven subfacies (sandy subfacies: St_MS+FS+CS, Sm_FS+MS, Sl_FS+VFS, and St_{MS + CS}; muddy subfacies: Fm_SILT+VFS+FS, Fm_SILT+VFS (O) and Fm_SILT+VFS (T)) are identified based on cluster analysis supplemented with sedimentary structures observed in field and other laboratory data. Changes in hydrodynamics are further deduced based on various sedimentological parameters and their ratios leading to arrive at a depositional model.     

Provenance of the Bosnian Flysch

Sandwiched between the Adriatic Carbonate Platform and the Dinaride Ophiolite Zone, the Bosnian Flysch forms a c. 3000 m thick, intensely folded stack of Upper Jurassic to Cretaceous mixed carbonate and siliciclastic sediments in the Dinarides. New petrographic, heavy mineral, zircon U/Pb and fission-track data as well as biostratigraphic evidence allow us to reconstruct the palaeogeology of the source areas of the Bosnian Flysch basin in late Mesozoic times. Middle Jurassic intraoceanic subduction of the Neotethys was shortly followed by exhumation of the overriding oceanic plate. Trench sedimentation was controlled by a dual sediment supply from the sub-ophiolitic high-grade metamorphic soles and from the distal continental margin of the Adriatic plate. Following obduction onto Adria, from the Jurassic–Cretaceous transition onwards a vast clastic wedge (Vranduk Formation) was developed in front of the leading edge, fed by continental basement units of Adria that experienced Early Cretaceous synsedimentary cooling, by the overlying ophiolitic thrust sheets and by redeposited elements of coeval Urgonian facies reefs grown on the thrust wedge complex. Following mid-Cretaceous deformation and thermal overprint of the Vranduk Formation, the depozone migrated further towards SW and received increasing amounts of redeposited carbonate detritus released from the Adriatic Carbonate Platform margin (Ugar Formation). Subordinate siliciclastic source components indicate changing source rocks on the upper plate, with ophiolites becoming subordinate. The zone of the continental basement previously affected by the Late Jurassic–Early Cretaceous thermal imprint has been removed; instead, the basement mostly supplied detritus with a wide range of pre-Jurassic cooling ages. However, a c. 80 Ma, largely synsedimentary cooling event is also recorded by the Ugar Formation, that contrasts the predominantly Early Cretaceous cooling of the Adriatic basement and suggests, at least locally, a fast exhumation.     

Comparison of Two Methods Used to Model Shape Parameters of Pareto Distributions

Two methods are compared for estimating the shape parameters of Pareto field-size (or pool-size) distributions for petroleum resource assessment. Both methods assume mature exploration in which most of the larger fields have been discovered. Both methods use the sizes of larger discovered fields to estimate the numbers and sizes of smaller fields: (1) the tail-truncated method uses a plot of field size versus size rank, and (2) the log–geometric method uses data binned in field-size classes and the ratios of adjacent bin counts. Simulation experiments were conducted using discovered oil and gas pool-size distributions from four petroleum systems in Alberta, Canada and using Pareto distributions generated by Monte Carlo simulation. The estimates of the shape parameters of the Pareto distributions, calculated by both the tail-truncated and log–geometric methods, generally stabilize where discovered pool numbers are greater than 100. However, with fewer than 100 discoveries, these estimates can vary greatly with each new discovery. The estimated shape parameters of the tail-truncated method are more stable and larger than those of the log–geometric method where the number of discovered pools is more than 100. Both methods, however, tend to underestimate the shape parameter. Monte Carlo simulation was also used to create sequences of discovered pool sizes by sampling from a Pareto distribution with a discovery process model using a defined exploration efficiency (in order to show how biased the sampling was in favor of larger fields being discovered first). A higher (more biased) exploration efficiency gives better estimates of the Pareto shape parameters.     

Pockmarks in the inner Oslofjord,Norway

Multibeam bathymetric surveys of the Inner Oslofjord, Norway have revealed a high density of pockmarks in the 179-km² inner fjord area, which contains over 500 pockmarks of varying size, typically 20–50 m in diameter and 2–10 m deep. These pockmarks have been investigated with a variety of techniques, including acoustic subbottom profiling, sedimentological and geochemical analyses of cores, remotely operated vehicle observation, and morphometry. Both the distribution and shapes of the pockmarks suggest that they are related to structures in the bedrock underlying relatively thin (<50 m) unconsolidated glacial and postglacial sediments. The data provide no direct indication of a particular mode of pockmark formation, but release of large amounts of biogenic, shallow methane seems unlikely. Several lines of evidence point to a continuous process of pockmark formation followed by inactivity, with some pockmarks recently active whereas others have been inactive for a considerable time. Some pockmarks are characterised by coarse sediment in their centres. The density, variety and easy access make this pockmark field an ideal model area for pockmark research. John S. Gray is deceased.