碘－钒盐催化下合成的四溴邻苯二甲酸酐

报道一种新的有效催化剂－碘－钒盐和在一定条件下合成四溴邻苯二甲酸酐的方法。探讨催化剂的组成配比、用量、温度及废酸循环使用等因素对合成方法的影响。该催化剂的催化效果和常用的碘、碘－铁催化剂相同，适用于四溴邻苯二甲酸酐的合成。     

海底勘查技术的最新发展

本文将介绍用于探测海底三维地质特征的海底勘查的最新发展。它主要包括海底地形测绘技术，海底形貌观测技术、海底地层声学探测技术等。     

基于神经网络的平底结构砰击压力预报

对利用神经网络预报平底结构入水砰击压力的方法进行了探讨。首先利用仿真软件计算各种情况下平底结构入水所产生的砰击压力，以此形成训练神经网络的数据集。其次利用数据集对三层反馈式网络进行了训练，讨论了不同隐含层节点数对该非线性系统的拟合能力，并且对梯度下降法、动量修正法和基于优化的LM算法的有效性和精度进行了比较，最后得出了适合平底结构入水砰击系统的网络结构。     

钛胶海水提铀动力学研究Ⅱ——吸附机理的推断

海水提铀机理的研究,已逐渐受到重视,然而,至今研究还不是很深入,观点也各有差别.例如,Keen等[1]认为钛胶从海水中吸附铀是阳离子交换过程,即海水中的铀是UO₂2+离子的形式与钛胶进行交换;尾方升等[2]则倾向于阴离子吸着,即铀是以UO₂(CO₃)₃4-的形式被吸附.我们曾于1973年在海洋局系统的一次会议上提出阳离子给合交换的看法,并在后来的两次专业会议上予以补充发展.张正斌[3]认为是阳离子交换或一价阳离子失水络合.最近崔清晨[4]提出可能是UO₂(OH)₃-的络合吸附.根据几年来的工作,我们仍认为,钛胶从海水中的吸铀机理可能是一种阳离子形式的络合交换过程.     

东海沉积物中轻矿物的研究

本文对东海大陆架、冲绳海槽及长江表层沉积物中的轻矿物进行了研究。调查区范围为121°-129°E,32°-26°30′N。长江采样区段为芜湖——长江口。共分析了124个样品,其中长江样品11个,东海大陆架样品100个,冲绳海槽样品13个。使用的样品粒级为0.1-0.25毫米。     

好望角附近海域春季大风的几种主要形势分析

通过普查和分析，概括出了春季好望角附近海域三种主要大风出现时的模型图，并以一个月中逐日4次船舶测风报告为例，分析了好望角大风的某些主要特征。     

Optimum design of filament-wound multilayer-sandwich submersible pressure hulls

Submersible pressure hulls with fiber-reinforced multilayer-sandwich constructions have been developed in recent years as substitutes for classical metallic ring-stiffened pressure hulls. This study aims to optimize the design of filament-wound multilayer-sandwich submersible pressure hulls, taking into consideration the shell buckling strength constraint, the angle-ply laminated facing failure strength constraint and the low-density isotropic core yielding strength constraint under hydrostatic pressure using the hybrid genetic algorithm (HGA). The thickness of the facing, the thickness of the core layer, the orientation angle of the fibers in the facings and the shear modulus of the core material are taken as design variables. A sensitivity analysis is performed to study the effects of the operational depths and the hull shell geometry parameter, the length-to-diameter ratio (L/D), on the optimal design of filament-wound multilayer-sandwich submersible pressure hulls with graphite/epoxy, glass/epoxy and boron/epoxy composite facings. The results reveal that the optimal weight of various sandwich pressure hulls increases linearly with the operational depth, but it is almost unchanged as the geometry paramter. Furthermore, Graphite/Epoxy is the best choice for the material of the facings in a light-weight design. With reference to wall design, Boron/Epoxy is the best choice for the material of the facing at shallow depths, but Graphite/Epoxy is the best choice at extreme depths. Results of this study provide a valuable reference for designers of underwater vehicles.     

GPS signal acquisition using the repeatability of successive code phase measurements

This paper introduces a new method for GPS signal acquisition, which is based on the repeatability of successive code phase measurements and the M-of-N search algorithm. The performance of the proposed method in terms of probability of signal detection is similar to that of traditional methods, except that the calculation of the probability of detection does not rely on the noise distribution or the Carrier-to-Noise ratio (C/N₀). The code phase repeatability-based method is presented along with equations for probability of detection and probability of false detection. If the distribution of the noise is known, it also provides an estimate of the C/N₀. The proposed method is illustrated for coherent and non-coherent acquisition and C/N₀ estimation.     

Objective prism survey of qsos in the field centered at 10h40m + 00°00′

QSO objective prism survey was done for the field centered at 10^h40^m + 00°00. For the 348 objects selected, we present in this paper their positions,B _J magnitudes, spectra, and finding charts. Based on the sample containing 163 QSO candidates with higher reliabilities (F 3), the surface density of QSO candidates withB _J 20 is estimated to be about 4.5 per square degree.Work based on UKST plates.