黄渤海松江鲈鱼线粒体控制区结构与序列多态性分析

测定了辽宁丹东、盘锦与河北秦皇岛35尾松江鲈鱼线粒体控制区序列977bp。共检出单倍型30个,多态位点35个,简约信息位点27个,绝大多数变异集中在192-342bp、594-783bp区段,同时识别出了线粒体控制区5’端终止序列区、中央保守区和3’端保守序列区的关键序列。3个群体总的单倍型多样性为0.990,核苷酸多样性为0.00718,丹东群体核苷酸多样性最高(0.00959)。群体间、群体内平均遗传距离低(分别为0.0067和0.0063);在NJ树上不同地理来源的个体混杂分布;Fst分析显示丹东与秦皇岛群体间遗传分化相对较大(0.14222,p0.05),其余不明显(0.02865-0.05616,p0.1),表明3个群体有可能隶属同一个种群。核苷酸不配对分布图表明松江鲈鱼可能未经历过大规模的种群扩张。     

图像处理在客流检测中的算法研究

为了将图像处理技术应用于智能客流检测,准确及时地获取运动信息,对视频图像中运动物体的分割与跟踪技术进行研究,将图像分割与跟踪技术有机地结合在一起。采用帧间与帧内相结合的分割算法,将图像填充技术应用于图像分割,消除了背景区域的干扰以及图像处理过程中造成的失真,达到了准确获取视频流中运动物体的目的。在图像跟踪过程,引入了边缘衍生点的概念,在此基础上,提出基于部分轮廓线特征点集的多线程跟踪算法,把运动物体跟踪转变为连续帧间特征点集匹配的问题,极大地减少了运算量,解决了图像跟踪处理领域中目标物体自遮挡与不完全遮挡的难题。经客流测试证明,文中方法能够对上下车客流数量进行准确统计。     

同步辐射标定平面镜反射率不确定度分析方法研究

为了提高多通道软X射线能谱仪的测量精度,2009年在北京同步辐射(BSRF)软X束线源上对多种材料的掠入射平面镜的反射率进行了标定.在标定实验的基础上,对光源的单色性、高次谐波以及源强稳定性、探测器响应一致性和数据采集统计误差等多项不确定因素进行了评估,给出了反射率的修正方法和相应的不确定度分析结果.     

原子掺杂对单元材料结晶能力的影响

2009年我们建立了一个凝结势模型用以预测材料形成单晶体的能力,表明单元体材料(Ni,Al,Cu,Ar,Mg)的结晶能力随凝结势的增大而单调增强.本文将凝结势模型应用于二元材料体系,并结合分子动力学模拟研究了6% Al原子掺杂对于Ni单晶材料结晶能力的影响.模拟结果发现,Al元素的掺杂会大大减弱Ni单晶的结晶能力,在此基础上提出了二元材料体系凝结势的定义,表明凝结势模型可广泛应用于预测二元体材料的结晶能力.     

Unconventional geometric phase gate and multiqubit entanglement for hot ions with a frequency-modulated field

We present an alternative scheme for implementing the unconventional geometric two-qubit phase gate and preparing multiqubit entanglement by using a frequency-modulated laser field to simultaneously illuminate all ions. Selecting the index of modulation yields selective mechanisms for coupling and decoupling between the internal and the external states of the ions. By the selective mechanisms, we obtain the unconventional geometric two-qubit phase gate, multiparticle Greenberger--Horne--Zeilinger states and highly entangled cluster states. Our scheme is insensitive to the thermal motion of the ions.     

Stable 85Rb micro vapour cells: fabrication based on anodic bonding and application in chip-scale atomic clocks

We describe the microfabrication of ⁸⁵Rb vapour cells using a glass-silicon anodic bonding technique and in situ chemical reaction between rubidium chloride and barium azide to produce Rb. Under controlled conditions, the pure metallic Rb drops and buffer gases were obtained in the cells with a few mm³ internal volumes during the cell sealing process. At an ambient temperature of 90 ℃ the optical absorption resonance of ⁸⁵Rb D1 transition with proper broadening and the corresponding coherent population trapping (CPT) resonance, with a signal contrast of 1.5% and linewidth of about 1.7 kHz, have been detected. The sealing quality and the stability of the cells have also been demonstrated experimentally by using the helium leaking detection and the after-9-month optoelectronics measurement which shows a similar CPT signal as its original status. In addition, the physics package of chip-scale atomic clock (CSAC) based on the cell was realized. The measured frequency stability of the physics package can reach to 2.1×10^-10 at one second when the cell was heated to 100 ℃ which proved that the cell has the quality to be used in portable and battery-operated devices.     

The anomalous radiation force of light on a left-handed material

This paper derives the force of the electromagnetic radiation on left-handed materials (LHMs) by a direct application of the Lorentz law of classical electrodynamics. The expressions of radiation force are given for TE-polarised and TM-polarised fields. The numerical results demonstrate that electromagnetic waves exert an inverse lateral radiation force on each edge of the beams, that is, the lateral pressure is expansive for TE-polarised beams and compressive for TM-polarised beams. The investigation of the radiation force will provide insights into the fundamental properties of LHMs and will provide to better understanding of the interaction of light with LHMs.     

Finite element modeling of heating phenomena of cracks excited by high-intensity ultrasonic pulses

A three-dimensional thermo-mechanical coupled finite element model is built up to simulate the phenomena of dynamical contact and frictional heating of crack faces when the plate containing the crack is excited by high-intensity ultrasonic pulses. In the finite element model, the high-power ultrasonic transducer is modeled by using a piezoelectric thermal-analogy method, and the dynamical interaction between both crack faces is modeled using a contact-impact theory. In the simulations, the frictional heating taking place at the crack faces is quantitatively calculated by using finite element thermal-structural coupling analysis, especially, the influences of acoustic chaos to plate vibration and crack heating are calculated and analysed in detail. Meanwhile, the related ultrasonic infrared images are also obtained experimentally, and the theoretical simulation results are in agreement with that of the experiments. The results show that, by using the theoretical method, a good simulation of dynamic interaction and friction heating process of the crack faces under non-chaotic or chaotic sound excitation can be obtained.     

水流挟沙力分析与探讨

水流挟沙力是悬沙输运计算中非常重要的问题之一,其计算形式常采用基于重力理论的经验和半经验公式.本文针对目前广泛采用的2种挟沙力关系式,选用4组实验水槽数据和2组天然河道实测资料分别讨论其关联性.结果表明,不论指数m在其取值范围内取何值,2个表达式皆存在一定的函数关联性.且当指数m取1和2/3时,直接表现出很强的线性关联.在挟沙力计算中采用流速的平方关系式,物理意义清晰,形式简单.在实际应用时,适当选取系数,挟沙力采用形式简单的平方关系式是完全可行的.     

气相色谱用于渤海采油平台原油的鉴别

采用气相色谱法对渤海海上6个不同区块、7个平台的8口油井原油中正构烷烃组分及姥鲛烷植烷进行了定性定量分析,通过原始指纹谱图、正构烷烃组分及姥鲛炕植烷浓度分布比较和特征比值比较对原油进行了鉴别.结果表明,不同区块的原油指纹信息不尽相同,即使同一平台不同油井所产的原油指纹也存在一定差异,采用气相色谱法进行分析可对其进行鉴别.原油的风化对特征比值影响较小,可利用其进行风化油样的鉴别.为确保鉴别的准确性,分析过程中必须实施严格质量控制措施.