Effect of different registration methods on precision of orientation based on RTK registration/georeferencing mode

Abstract

Compared with traditional methods, the three-dimensional laser-scanning (3D-LS) technique can efficiently acquire many high-quality geometric properties of rock discontinuities. In practice, engineers usually prefer to simplify the processing by using single-station point data and roughly orienting owing to the complexity of registration/georeferencing multi-station point data. However, prior published studies have paid little attention to the accuracy and reliability when determining discontinuity orientations using 3D-LS. We propose a reliable and accurate method with robust on-site applicability. As part of an ongoing effort, we are evaluating the precision of the commonly used coarse registration method and the fine registration method, and promoted the optimized coarse- and fine-registration methods and evaluated their precision. It is found that: (1) the common and the optimized registration method can meet our project’s engineering requirements, and the optimized registration method improved accuracy in the dip direction by approximately 1°; (2) fine registration using an iterative closest point (ICP) algorithm can correct both dip direction and dip angle; and (3) the orientation is of high precision with commonly used coarse and fine registration, whereas the optimization effect to correct the orientation is slightly limited.     

Impacts of confining pressure and safety thickness on water and mud inrush in weathered granite

Abstract

Due to the strong disintegration and water erosion of completely weathered granite, water and mud inrush disasters are apt to take place in this zone during underwater tunnel construction. The pore, compactness, seepage path length, fracture geometries and their interconnections for water and mud transfer are strongly influenced by confining pressure and waterproof-resistant slab safety thickness. In order to inspect the influence, a series of experiments based on a self-designed testing system and non-Darcy testing method were performed. The results indicated that the water and mud inrush evolution increased with the increase of confining pressure and decreased with the increase of safety thickness. In particular, the confining pressure mainly influences the initial evolution stage, and a critical safety thickness to prevent water and mud inrush is obtained. Besides, the non-Darcy testing method results shows that the water and mud inrush evolution affects the influence of non-Darcy flow. For example, while the safety thickness was smaller than the critical value, the evolution was large and unstable and its behavior transferred into nonlinear. In this case, the flow changed to non-Darcy flow.     

Effect of nano-MgO on mechanical performance of cement stabilized silty clay

Abstract

A series of direct shear tests were performed on cement-admixed silty clay to investigate the effect of cement content and nano-magnesia (MgO) on its shear strength properties. For each normal stress, shear strength increased with cement content. However, an obvious increment in shear strength was achieved when the cement content was adjusted from 13% to 17%. Both cohesion and friction angle of cemented soil increased with cement content, and exponential function was adopted to correlate both the factors with cement content. For cement content of 10% investigated in this study, the optimum nano-MgO content was 10‰, wherein the cohesion could reach the peak value. The microstructure of the mixture revealed that the structure of the mixture was compacted for the optimum nano-MgO content. However, micro-cracks were formed when the amount of nano-MgO exceeded its optimum content.     

一种无人艇自适应无线通信系统的设计应用

随着无人艇技术的发展成熟,各型无人艇已逐步应用到民用和军用领域。无线通信系统作为无人艇的重要组成部分,承担着无人艇与母艇之间信息交互的功能。从无线通信技术的发展现状出发,分析出适用于无人艇应用场景的无线通信技术及工程设计方法,并设计了一种自适应无线通信系统。该系统能根据无人艇工作状态提供连续稳定的数据链,经试验测试,运行效果良好。     

The sulfurization recorded in tridymite in the monomict eucrite Northwest Africa 11591

Some of the tridymite in the monomict Northwest Africa (NWA) 11591 eucrite are found to have sulfide‐rich replacement textures (SRTs) to varying degrees. The SRTs of tridymite in NWA 11591 are characterized by the distribution of loose porous regions with aggregates of quartz and minor troilite grains along the rims and fractures of the tridymite, and we propose a new mechanism for the origin of this texture. According to the volume and density conversion relationship, the quartz in the SRT of tridymite with a hackle fracture pattern was transformed from tridymite. We suggest that the primary tridymite grains are affected by the S‐rich vapors along the rims and fractures, leading to the transformation of tridymite into quartz. In addition, the S‐rich vapors reacted with Fe²⁺, which was transported from the relict tridymite and/or the adjacent Fe‐rich minerals, and/or the S‐rich vapors react with the exotic metallic Fe to form troilite grains. The sulfurization in NWA 11591 most likely occurred during the prolonged subsolidus thermal metamorphism in the shallow crust of Vesta and might be an open, relatively high temperature (>800 °C) process. Sulfur would be an important component of the metasomatic fluid on Vesta.     

Clinoform growth and sediment flux into late Cenozoic Qiongdongnan shelf margin,South China Sea

The South China Sea continental margin in the Qiongdongnan Basin (QDNB) area has incrementally prograded since 10.5 Ma generating a margin sediment prism more than 4km-thick and 150–200 km wide above the well-dated T40 stratigraphic surface. Core and well log data, as well as clinoform morphology and growth patterns along 28 2D seismic reflection lines, illustrate the evolving architecture and margin morphology; through five main seismic-stratigraphic surfaces (T40, T30, T27, T20 and T0) frame 15 clinothems in the southwest that reduce over some 200 km to 8 clinoforms in the northeast. The overall margin geometry shows a remarkable change from sigmoidal, strongly progradational and aggradational in the west to weakly progradational in the east. Vertical sediment accumulation rate increased significantly across the entire margin after 2.4 Ma, with a marked increase in mud content in the succession. Furthermore, an estimate of sediment flux across successive clinoforms on each of the three selected seismic cross sections indicate an overall decrease in sediment discharge west to east, away from the Red River depocenter, as well as a decrease in the percentage of total discharge crossing the shelf break in this same direction. The QDNB Late Cenozoic continental margin growth, with its overall increased sediment flux, responded to the climate-induced, gradual cooling and falling global sea level during this icehouse period.     

青藏高原农区农户的家庭能源消费研究

农村能源转型是能源消费革命的重要组成部分。基于问卷调查和入户访谈,对青海省10个县（区）的318户农区家庭用能信息进行调查,辨识了青海省农区不同收入分层家庭的能源消费模式,并通过建立典型家庭能源流模型,总结了家庭能获取-消费-废弃过程的形态变化。结果显示：青海省农区家庭能源消费以煤炭、薪柴和秸秆为主,非商品能源消费占比为49.6%,清洁能源使用率低。煤炭消费在5类家庭中均占比最高,薪柴和秸秆消费在低收入家庭占比较高。高收入家庭能源消费类型更多,消费量也大,能源流动更复杂。最后,根据青海省的经济地理特征,提出相应政策建议。     

基于“模拟实验”落实高中生地理实践力素养的培养与评价--以人教版高中《地理》必修1为例

模拟实验作为地理实践力的主要组成要素之一,在培养高中生求知探索品质、活用所学地理知识、锻炼动手能力等方面具有独特作用。本文结合新课标、校情、学情,划分了地理模拟实验的实践力表现水平层次,以人教版高中《地理》必修1中的热力环流、洋流、火山这三个有代表性的知识点为题材,进行校本化的模拟实验、水平划分和量化测评,实现地理实践力素养培养和评价的落地。     

浙江省县域旅游经济增长的空间溢出效应

论文以浙江省65个县域单元为例,综合运用探索性空间数据分析和空间杜宾模型,实证了2004—2016年浙江省县域旅游经济增长及其影响因素的空间溢出效应。结果表明:① 研究期内浙江省县域旅游经济整体表现出较强的空间依赖性,局部空间关联类型以高—高和低—低集聚为主,高—高集聚区主要位于中心市区,低—低集聚区主要位于浙西和浙南等地。旅游经济增长的空间自相关性表明考察其演化路径时不可忽视空间效应的存在。② 浙江省县域入境和国内旅游经济增长均存在显著的空间溢出效应,本地入境和国内旅游经济每增长1%,将会带动邻近县域入境和国内旅游经济分别增长0.192%和0.249%。经济发展水平、旅游资源禀赋、旅游基础设施和区位交通条件等均具有显著的空间溢出效应,忽视旅游经济增长的空间效应,将会高估这些因素的作用强度。③ 驱动旅游经济增长的各影响因素的作用强度和影响路径存在显著差异,未来应充分关注入境和国内旅游经济增长的空间依赖特征,将驱动旅游经济增长的各因素齐抓并举,方可实现县域旅游经济的高质量发展。     

Salinivibrio sp.YH4胞外丝氨酸蛋白酶EYHS耐盐性及生物信息学分析

摘要：目的 探讨菌株Salinivibrio sp.YH4分泌的丝氨酸蛋白酶EYHS的耐盐性及结构特征。方法 明胶底物酶谱法分析EYHS的耐盐性。应用生物信息学手段对EYHS及6种耐盐的S8家族丝氨酸蛋白酶结构特征进行分析。结果 EYHS在4 mol/L的NaCl溶液中仍具有活性,属于耐盐蛋白酶。EYHS及6种S8家族丝氨酸蛋白酶分子表面的loop区等无规则卷曲所占比例较高,α-螺旋与β-片层则主要位于酶分子内部。EYHS分子表面酸性氨基酸含量较高,且具有弱疏水内核。多序列比对发现蛋白酶的催化三联体两侧存在高度保守的基序和保守的极性氨基酸及芳香族氨基酸,并存在多个保守的Gly与Ala。同源模建和表面电荷分布显示,α螺旋和β片层围成了蛋白酶的催化腔,EYHS活性中心包含由Asp32、His65与Ser215组成的催化三联体,且催化位点区域表面静电势为负。结论 上述结构特征可能有助于耐盐丝氨酸蛋白酶EYHS在高盐环境下维持其稳定性和适度柔性,并有助于其催化功能的发挥,为深入研究耐盐丝氨酸蛋白酶的高盐环境适应性提供了一定的理论依据。