Morphology and dynamics of the intertidal floodplain along the Amazon tidal river

Depositional environments along the tidal river downstream of Óbidos have been proposed as important sinks for up to one third of the sediment discharge from the Amazon River. However, the morphology of the intertidal floodplain and the dynamics of sediment exchange along this reach have yet to be described. River-bank surveys in five regions along the Amazon tidal river reveal a distinct transition in bank morphology between the upper, central and lower reaches of the tidal river. The upper tidal-river floodplain is defined by prominent natural levees that control the transfer of water and sediment between the mainstem Amazon River and its floodplain. Greater tidal influence in the central tidal river suppresses levee development, and tidal currents increase sediment transport into the distal parts of the floodplain. In the lower tidal river, the floodplain morphology closely resembles marine intertidal environments (e.g. mud flats, salt marshes), with dendritic tidal channels incising elevated vegetated flats. Theory, morphology and geochronology suggest that the dynamics of sediment delivery to the intertidal floodplain of the Amazon tidal river vary along its length due to the relative influence and coupling of fluvial and tidal dynamics. © 2018 John Wiley & Sons, Ltd.     

Enhancing Microbial Sulfate Reduction of Hydrocarbons in Groundwater Using Permeable Filled Borings

At a service station closed in 1993, groundwater contained benzene that persisted above the cleanup goal of 1 mg/L in zones depleted of background sulfate. The benzene and other petroleum hydrocarbons (PHCs) were present as much as 36 feet (11 m) below the water table and therefore remediation of a thick saturated zone interval was required. Microcosms using site sediments demonstrated that anaerobic benzene biodegradation occurred only if sulfate was added, suggesting sulfate addition as a remediation approach. Twenty-four boreholes (9.1″ diameter and 56′ deep) were drilled around four monitoring wells, in which benzene concentrations exceeded 1 mg/L. The boreholes were backfilled with a mixture of gravel and 15,000 pounds of gypsum (which releases sulfate as it dissolves) to create “Permeable Filled Borings” (PFBs). Concurrently, nine high pressure injections (HPIs) of gypsum slurry were conducted in other site locations (312 pounds of gypsum total). PFBs were expected to release sulfate for up to 20 years, whereas HPIs were expected to produce a short-lived plume of sulfate. Concentrations of benzene and sulfate in groundwater were monitored over a 3-year period in six monitoring wells. In two wells near PFBs, benzene concentrations dropped below the cleanup goal by two to three orders of magnitude; in one well, sulfate concentrations exceeded 500 mg/L for the most recent 18 months. Benzene concentrations in two other PFB monitoring wells declined by a factor of 2 to 4, but remained above 1 mg/L, presumably due to high-dissolved PHC concentrations and possibly greater residual PHC mass in adjacent sediments, and therefore greater sulfate demand. However, hydrogen and sulfur isotopic enrichment in benzene and sulfate, respectively, confirmed biodegradation of benzene and stimulation of sulfate-reducing conditions. Thus, it is hypothesized that the PHC mass in adjacent sediments will decline over time, as will dissolved PHC concentrations, and eventually benzene concentrations will decrease below the cleanup goal. Benzene in two HPI monitoring wells was below the cleanup goal for all but one sampling event before HPIs were conducted and remained below the cleanup goal after HPIs; there was no stimulation of sulfate-reducing conditions. It is concluded that sulfate released from PFBs contributed to declining benzene concentrations.     

The geoarchaeology of Iron Age “moated” sites of the Upper Mae Nam Mun Valley,N.E. Thailand. I: Palaeodrainage,site–landscape relationships and the origins of the “moats”

The study focuses on the “moated” Iron Age sites of N.E. Thailand, first identified as significant prehistoric settlement sites in the 1940s from aerial photography. Two more recent photograph sets are used to map the surficial geology and prehistoric site distribution for a study area west of Phimai, N.E. Thailand, with a focus on site–landscape relationships and, in particular, relationships between site location and form and patterns of palaeodrainage. The derived record of the surficial geology reflects several phases of palaeodrainage, characterized by differing locations and types of former river channels. Of note is the differentiation between a recent period in which river channels, including those presently active, are single-string meandering channels, and an older period of broad belts of meandering multistring channels. The prehistoric site distribution correlates closely with the older drainage, and for many, the encircling channels (the “moats”) are closely associated with former river channels. These relationships provide a critical and novel model for site distribution; several implications arise, supported by emerging field evidence, and introducing issues for archaeological debate: (i) there is no need, as has been done in the past, to invoke prehistoric artificial forms of drainage associated with the sites; (ii) the definition of the encircling channels as “moats” is seriously called into question; and (iii) the inferred geomorphological evolution of the floodplain implies past changes in environmental parameters such as run-off, climate or biophysical environments. Since the sites are all located in or beside ancient meander belts, these parameters should now be introduced into archaeological discussions regarding the establishment, history, evolution, and abandonment of the Iron Age sites. Methodologically, this article illustrates the need to be aware of the complexity of aerial photograph interpretation in archaeological survey, showing that careful analysis of aerial photograph information may have a significant impact upon the modeling of prehistoric interpretations. Further stratigraphical studies will be reported subsequently, and will refine the models presented here. © 1999 John Wiley & Sons, Inc.     

Bed material texture in low order streams on the Queen Charlotte Islands,British Columbia

Low order channels comprise a large proportion of the links of every drainage basin, and are often at the centre of land management concerns. They exhibit hydrological and geomorphological characteristics atypical of higher order links. This paper examines the nature and causes of variations in the bed material texture of two streams on the Queen Charlotte Islands, British Columbia. The extant, functional exponential model is found to be inadequate for explaining observed changes in grain size parameters with distance downstream. Recurrent disruption of sediment transport by large organic debris jams, and the sporadic contamination of the fluvial sediment population by colluvial inputs, preclude the development of longitudinal structure. Rather, grain size varies erratically over short distances. A stochastic model best describes the observed variations, and should be adopted as an alternative to the exponential model in low order links. Characteristic variances are controlled by the degree of hillslope-channel coupling, and the extent and characteristics of non-alluvial storage mechanisms.     

Review: Occurrence of the pathogenic amoeba <Emphasis Type="Italic">Naegleria fowleri</Emphasis> in groundwater

Naegleria fowleri is a thermophilic free-living amoeba found worldwide in soils and warm freshwater. It is the causative agent of primary amebic meningoencephalitis, a nearly always fatal disease afflicting mainly children and young adults. Humans are exposed to the organism via swimming, bathing, or other recreational activity during which water is forcefully inhaled into the upper nasal passages. Although many studies have looked at the occurrence of N. fowleri in surface waters, limited information is available regarding its occurrence in groundwater and geothermally heated natural waters such as hot springs. This paper reviews the current literature related to the occurrence of N. fowleri in these waters and the methods employed for its detection. Case reports of potential groundwater exposures are also included. Despite increased interest in N. fowleri in recent years due to well-publicized cases linked to drinking water, many questions still remain unanswered. For instance, why the organism persists in some water sources and not in others is not well understood. The role of biofilms in groundwater wells and plumbing in individual buildings, and the potential for warming due to climate change to expand the occurrence of the organism into new regions, are still unclear. Additional research is needed to address these questions in order to better understand the ecology of N. fowleri and the conditions that result in greater risks to bathers.     

An Analysis Platform for Multiscale Hydrogeologic Modeling with Emphasis on Hybrid Multiscale Methods

One of the most significant challenges faced by hydrogeologic modelers is the disparity between the spatial and temporal scales at which fundamental flow, transport, and reaction processes can best be understood and quantified (e.g., microscopic to pore scales and seconds to days) and at which practical model predictions are needed (e.g., plume to aquifer scales and years to centuries). While the multiscale nature of hydrogeologic problems is widely recognized, technological limitations in computation and characterization restrict most practical modeling efforts to fairly coarse representations of heterogeneous properties and processes. For some modern problems, the necessary level of simplification is such that model parameters may lose physical meaning and model predictive ability is questionable for any conditions other than those to which the model was calibrated. Recently, there has been broad interest across a wide range of scientific and engineering disciplines in simulation approaches that more rigorously account for the multiscale nature of systems of interest. In this article, we review a number of such approaches and propose a classification scheme for defining different types of multiscale simulation methods and those classes of problems to which they are most applicable. Our classification scheme is presented in terms of a flowchart (Multiscale Analysis Platform), and defines several different motifs of multiscale simulation. Within each motif, the member methods are reviewed and example applications are discussed. We focus attention on hybrid multiscale methods, in which two or more models with different physics described at fundamentally different scales are directly coupled within a single simulation. Very recently these methods have begun to be applied to groundwater flow and transport simulations, and we discuss these applications in the context of our classification scheme. As computational and characterization capabilities continue to improve, we envision that hybrid multiscale modeling will become more common and also a viable alternative to conventional single‐scale models in the near future.     

Analytic Element Modeling of Steady Interface Flow in Multilayer Aquifers Using AnAqSim

This paper presents the analytic element modeling approach implemented in the software AnAqSim for simulating steady groundwater flow with a sharp fresh‐salt interface in multilayer (three‐dimensional) aquifer systems. Compared with numerical methods for variable‐density interface modeling, this approach allows quick model construction and can yield useful guidance about the three‐dimensional configuration of an interface even at a large scale. The approach employs subdomains and multiple layers as outlined by Fitts (2010) with the addition of discharge potentials for shallow interface flow (Strack 1989). The following simplifying assumptions are made: steady flow, a sharp interface between fresh‐ and salt water, static salt water, and no resistance to vertical flow and hydrostatic heads within each fresh water layer. A key component of this approach is a transition to a thin fixed minimum fresh water thickness mode when the fresh water thickness approaches zero. This allows the solution to converge and determine the steady interface position without a long transient simulation. The approach is checked against the widely used numerical codes SEAWAT and SWI/MODFLOW and a hypothetical application of the method to a coastal wellfield is presented.     

Flow‐Through Stream Modeling with MODFLOW and MT3D: Certainties and Limitations

This paper aims to assess MODFLOW and MT3D capabilities for simulating the spread of contaminants from a river exhibiting an unusual relationship with an alluvial aquifer, with the groundwater head higher than the river head on one side and lower on the other (flow‐through stream). A series of simulation tests is conducted using a simple hypothetical model so as to characterize and quantify these limitations. Simulation results show that the expected contaminant spread could be achieved with a specific configuration composed of two sets of parameters: (1) modeled object parameters (hydraulic groundwater gradient, hydraulic conductivity values of aquifer and streambed), and (2) modeling parameters (vertical discretization of aquifer, horizontal refinement of stream modeled with River [RIV] package). The influence of these various parameters on simulation results is investigated, and potential complications and errors are identified. Contaminant spread from stream to aquifer is not always reproduced by MT3D due to the RIV package's inability to simulate lateral exchange fluxes between stream and aquifer. This paper identifies the need for a MODFLOW streamflow package allowing lateral stream‐aquifer interactions and streamflow routine calculations. Such developments could be of particular interest for modeling contaminated flow‐through streams.