软流圈熔体地幔交代作用过程中的铂族元素行为

南美洲南部的Pali Aike火山岩区第四纪碱性玄武岩中普遍发育含石榴石的斜方辉石岩包体。这种斜方辉石岩既作为独立的捕掳体存在又以细脉的形式穿插于橄榄岩捕掳体中。斜方辉石岩普遍含富Ti矿物,并且次生斜方辉石含橄榄石和单斜辉石残晶。与含石榴石橄榄岩中的斜方辉石相比,这种次生的斜方辉石以高TiO2、中等含量的Al2O3以及低Mg#为特征,表明它是在一种高度分异演化的富Ti熔体交代作用下通过消耗橄榄石和单斜辉石方式形成的。斜方辉石岩全岩的Co、Ni略低,Cr和铂族元素(PGE)含量与地幔橄榄岩相当,表明这些元素在交代作用过程中相对稳定,而交代介质带入的组分以碱质(K2O+Na2O)、Ti、Si、Al和S为主。交代的斜方辉石在现代活动岛弧和古克拉通的地幔橄榄岩捕掳体中多有报道。与这些环境中地幔样品的斜方辉石相比,PaliAike地区的次生斜方辉石含有相对高的Ti和Al,以及相对低的Mg。高Ti低Mg属性反映了交代介质可能来源于下伏的软流圈地幔并且经历了高度的分异和演化过程。Pali Aike地区所见到的这种交代斜方辉石和斜方辉石岩在其他被上涌软流圈影响的陆下岩石圈地幔中可能普遍存在。这些研究对了解中国华北-东北中生代以来的岩石圈地幔减薄机制有着重要的借鉴意义。     

CHARACTERIZATION OF ALPINE SOILS,EAGLE CAP,WALLOWA MOUNTAINS,OREGON

This study examines alpine soil development along a toposequence on Eagle Cap, Wallowa Mountains, northeast Oregon. Soils studied are from Wind Blown (WB) and Minimal Snow Cover (MSC) sites in the Ridge-Top Tundra geomorphic province. The soils are predominantly loamy sands, and exhibit minimal structural development. Soil pH ranges from 6.5 to 7.3 increasing with depth, and organic carbon ranges from 3.9% in the A horizon to 0.8% in the C horizon. The soils display significant input from Cascade volcanic ash infall and eolian influx from the weathered marble nearby. It is postulated that the ash content in the soils originates from Mazama Ash deposits. Though Eagle Cap soils have developed for the most part on granodiorite, the strong influence of the volcanic ash on pedogenesis leads to a preliminary classification of Andisols, most probably Typic and Lithic Haplocryands. [Key words: Alpine soils, Andisols, Wallowa Mountains.]     

The Nazca Group of south-central Peru: Age,source, and regional volcanic and tectonic significance

The Nazca Group, exposed east of Nazca, Peru, consists of a lower part composed of conglomerate and finer-grained clastic strata and an upper part made up of at least seven ash-flow sheets (cooling units or ignimbrites), collectively known as the Nazca Tuff. These tuffs were erupted between about 22 and 18 m.y. ago from a vent area in the vicinity of Pampa Galeras now marked by a collapse caldera. The early Miocene age of the Nazca Tuff provides additional evidence for a major pulse of largely pyroclastic felsic volcanism throughout the central Andes during the early Miocene. Recognition of the Pampa Galeras caldera supports the idea that many of these rocks were erupted from vent areas of the collapse-caldera type located near the eastern margin of the Coastal batholith.The Nazca Group overlies a major erosional surface cut on the Coastal batholith and its envelope that can be traced southward to the Chilean border. This surface is a continuation of the post-Incaic erosional surface to the north, which is overlain by conglomerate and radiometrically dated volcanic rock of late Eocene age. The post-Incaic surface therefore represents a major episode of regional uplift and pedimentation that followed early Tertiary orogeny. The absence of volcanic rocks of late Eocene/early Oligocene age overlying the Coastal batholith near Nazca and in southern Peru may reflect a general absence of post-Incaic volcanism in this portion of the Andes possibly related to differences in the angle of subduction and/or restriction of volcanic and volcaniclastic rocks of this age to depositional basins east of the batholith.     

Uncertainty assessment of ephemeral gully identification,characteristics and topographic threshold when using aerial photographs in agricultural settings

Manual digitizing on aerial photographs is still commonly used for characterizing gully erosion over large areas. Even when automated detection procedures are implemented, manual digitizing is frequently being resorted to in order to constitute reference datasets used for training and validation. In both cases, manual digitizing entails some subjective decisions on behalf of the operator, which introduces uncertainty into the resulting datasets. To assess the magnitude of this uncertainty, 11 experienced operators were asked to digitize and classify ephemeral gullies (EGs) on cropland following a standardized methodology. The resulting 11 datasets were compared in terms of number, type and location of EGs. Furthermore, for EGs located on a well‐defined runoff flow concentration axis, the slope versus contributing area topographic thresholds required for initiating gully channels were assessed using four thresholding methods, and compared across the 11 datasets. The operators identified 259 different EGs. However, the number (52–139) and sum total length (8.9–23.7 km) of EGs varied widely across operators. Only 34% of the EGs were digitized by more than half of the operators, and 7% were identified by all. Identification of EGs located on a well‐defined flow concentration axis proved least subjective. The longer the EG and the more fields the EG crossed, the larger the number of operators that were able to identify it. EGs were also most easily identified when located in sugar beet fields as compared to other crops. EG classification and topographic threshold lines were also found to be strongly operator‐dependent. Quantile regression appeared to be one of the most robust thresholding methods. Operator subjectivity when digitizing EGs on orthophotographs introduces uncertainty that should be taken into account in future remote sensing‐based studies of EG erosion whenever they rely, in part or in full, on manual photograph interpretation. Copyright © 2014 John Wiley & Sons, Ltd.     

Modelling of major elements in mantle-melt systems using trace element approaches

Major elements can be modelled in ways similar to the quantitative petrogenetic modelling used for trace elements. In contrast to modelling with trace elements, however, modelling with major elements is constrained by the stoichiometry of the solid phases. Within these constraints, the same equations for partial melting and crystallization which have been used to such advantage for trace elements may be used for major elements.Calculated MgO and FeO abundances in a mantle-melt system are used as an example of the modelling technique. Such modelling yields limited fields of permissible melts and residues for a given parent composition, but does not give the paths of melting. It does allow the temperature and extent of melting which gave rise to a melt to be determined from the MgO and FeO abundances of the melt or residual solid. Applying the results of the modelling to igneous rocks and ultramafic nodules leads to the following conclusions, which are subject to the uncertainties in the available distribution coefficients. Least differentiated basalt glasses from the ocean floor are derived from parent melts with less than 15.5 weight % MgO and 8.2 wt. % FeO. Komatiites may be derived by less than 60% melting of a pyrolite source leaving a residue of olivine and pyroxene. Many nodules from the subcontinental mantle appear to be residues of large fractions of melting (>30%) at high temperature and pressure, whereas ultramafic nodules from oceanic basalts appear to be residues of smaller fractions of melting (<30%) at lower temperatures and pressures.     

Zircon evidence for a ~200 k.y. supereruption-related thermal flare-up in the Miocene southern Black Mountains,western Arizona,USA

The Silver Creek caldera (southern Black Mountains, western Arizona) is the source of the 18.8 Ma, >700 km³ Peach Spring Tuff (PST) supereruption, the largest eruption generated in the Colorado River Extensional Corridor (CREC) of the southwestern United States. Within and immediately surrounding the caldera is a sequence of volcanics and intrusions ranging in age from ~19 to 17 Ma. These units offer a record of magmatic processes prior to, during, and immediately following the PST eruption. To investigate the thermal evolution of the magmatic center that produced the PST, we applied a combination of Ti-in-zircon thermometry, zircon saturation thermometry, and high-precision U–Pb CA–TIMS zircon dating to representative pre- and post-supereruption volcanic and intrusive units from the caldera and its environs. Similar to intracaldera PST zircons, zircons from a pre-PST trachytic lava (19 Ma) and a post-PST caldera intrusion (18.8 Ma) yield exceptionally high-Ti concentrations (most >20 ppm, some up to nearly 60 ppm), corresponding to calculated temperatures that exceed 900 °C. In these units, Ti-in-zircon temperatures typically surpass zircon saturation temperatures (ZSTs), suggesting the entrainment of zircon that had grown in hotter environments within the magmatic system. Titanium concentrations in younger volcanic and intrusive units (~18.7–17.5 Ma) decline through time, corresponding to an average cooling rate of 10^?3.5 °C/year. The ~200 k.y. thermal peak evident at Silver Creek caldera is spatially limited: elsewhere in the Miocene record of the northern CREC, Ti-in-zircon concentrations and ZSTs are much lower, suggesting that felsic magmas were generally substantially cooler.     

Fine-grained rocks: Shales or physilites

Fine-grained sediments and rocks containing a high percentage of phyllosilicate minerals have never been satisfactorily classified. Rocks names are poorly defined. The definition of many terms such as clay, clay mineral and shale are logically inconsistent. The major problems are caused by the assumption that there is a fixed relation between grain size and mineralogy and that structure is a basic parameter.Shallow-buried recent and ancient marine sediments with a high content of phyllosilicates commonly contain 60–80% clay and 20–40% silt. Phyllosilicates are present in approximately the same amounts as the clay-size material. Many fine-grained sediments that have been deeply buried commonly contain 30–40% clay; the phyllosilicate mineral content is in the range of 60–80%.In most fine-grained sediments, as deposited, the majority of the material is in the clay size. With burial and diagenesis, much of the clay-sized material grows to silt size. Thus, claystones are converted to siltstones.The term physil, an abbreviated form of phyllosilicate, is proposed to describe all sheet silicate minerals regardless of grain size. Physilites are rocks with a high content of physils. A simple classification is proposed in which size, mineralogy and structure are treated as independent variables.     

Stability of Kerogen Classification with Regard to Image Segmentation

This paper investigates the stability of an automatic system for classifying kerogen material from images of sieved rock samples. The system comprises four stages: image acquisition, background removal, segmentation, and classification of the segmented kerogen pieces as either inertinite or vitrinite. Depending upon a segmentation parameter d, called “overlap”, touching pieces of kerogen may be split differently. The aim of this study is to establish how robust the classification result is to variations of the segmentation parameter. There are two issues that pose difficulties in carrying out an experiment. First, even a trained professional may be uncertain when distinguishing between isolated pieces of inertinite and vitrinite, extracted from transmitted-light microscope images. Second, because manual labelling of large amount of data for training the system is an arduous task, we acquired the true labels (ground truth) only for the pieces obtained at overlap d=0.5. To construct ground truth for various values of d we propose here label-inheritance trees. With thus estimated ground truth, an experiment was carried out to evaluate the robustness of the system to changes in the segmentation through varying the overlap value d. The average system accuracy across values of d spanning the range from 0 to 1 was 86.5%, which is only slightly lower than the accuracy of the system at the design value of d=0.5 (89.07%).     

The age of the martian meteorite Northwest Africa 1195 and the differentiation history of the shergottites

Samarium-neodymium isotopic analyses of unleached and acid-leached mineral fractions from the recently identified olivine-bearing shergottite Northwest Africa 1195 yield a crystallization age of 347 ± 13 Ma and an value of +40.1 ± 0.9. Maskelynite fractions do not lie on the Sm-Nd isochron and appear to contain a martian surface component with low ¹⁴⁷Sm/¹⁴⁴Nd and ¹⁴³Nd/¹⁴⁴Nd ratios that was added during shock. The Rb-Sr system is disturbed and does not yield an isochron. Terrestrial Sr appears to have affected all of the mineral fractions, although a maximum initial ⁸⁷Sr/⁸⁶Sr ratio of 0.7016 is estimated by passing a 347 Ma reference line through the maskelynite fraction that is least affected by contamination. The high initial value and the low initial ⁸⁷Sr/⁸⁶Sr ratio, combined with the geologically young crystallization age, indicate that Northwest Africa 1195 is derived from a source region characterized by a long-term incompatible-element depletion.The age and initial Sr and Nd isotopic compositions of Northwest Africa 1195 are very similar to those of Queen Alexandra Range 94201, indicating these samples were derived from source regions with similar Sr-Nd isotopic systematics. These similarities suggest that these two meteorites share a close petrogenetic relationship and might have been erupted from a common volcano. The meteorites Yamato 980459, Dar al Gani 476, Sayh al Uhaymir 005/008, and Dhofar 019 also have relatively old ages between 474 and 575 Ma and trace element and/or isotopic systematics that are indicative of derivation from incompatible-element-depleted sources. This suggests that the oldest group of meteorites is more closely related to one another than they are to the younger meteorites that are derived from less incompatible-element-depleted sources. Closed-system fractional crystallization of this suite of meteorites is modeled with the MELTS algorithm using the bulk composition of Yamato 980459 as a parent. These models reproduce many of the major element and mineralogical variations observed in the suite. In addition, the rare earth element systematics of these meteorites are reproduced by fractional crystallization using the proportions of phases and extents of crystallization that are calculated by MELTS. Other shergottites that demonstrate enrichments in incompatible-elements and have evolved Sr and Nd isotopic systematics have some geochemical systematics that are similar to those observed in the depleted group. Most notably, although they exhibit a very limited range of incompatible trace element and isotopic compositions, they have highly variable major element compositions. This is also consistent with evolution from a common mantle source region by variable amounts of fractional crystallization. If this scenario is correct, it suggests that the combined effects of source composition and fractional crystallization are likely to account for the major element, trace element, and isotopic diversity of all shergottites.     

Form and growth of bars in a wandering gravel‐bed river

The changing form of developing alluvial river bars has rarely been studied in the field, especially in the context of the fixed, compound, mainly alternate gravel bars that are the major morphological feature of the wandering style. Century scale patterns of three‐dimensional growth and development, and the consequent scaling relations of such bars, are examined along the gravel‐bed reach of lower Fraser River, British Columbia, Canada. A retrospective view based on maps and aerial photographs obtained through the twentieth century shows that individual bars have a life history of about 100 years, except in certain, protected positions. A newly formed gravel bar quickly assumes its ultimate thickness and relatively quickly approaches its equilibrium length. Growth continues mainly by lateral accretion of unit bars, consistent with the lateral style of instability of the river. Bar growth is therefore allometric. Mature bars approach equilibrium dimensions and volume that scale with the overall size of the channel. Accordingly, the bars conform with several published criteria for the ultimate dimensions of alternate barforms. Sand bars, observed farther downstream, have notably different morphology. Fraser River presents a typical wandering channel planform, exhibiting elements of both meandered and low‐order braided channels. Hydraulic criteria to which the Fraser bars conform illustrate why this planform develops and persists. The modest rate of bed material transfer along the channel – typical of the wandering type – determines a century‐length time scale for bar development. This time scale is consistent with estimates that have been made for change of the macroform elements that determine the overall geometry of alluvial channels. Copyright © 2009 John Wiley & Sons, Ltd.