Fire Severity,Water Repellency Characteristics and Hydrogeomorphological Changes Following the Christmas 2001 Sydney Forest Fires

Soil water repellency can enhance overland flow and erosion and may be altered by fire. The Christmas 2001 bushfires near Sydney allowed investigation of the relationship between fire severity, water repellency and hydrogeomorphological changes. For two sub-catchments with differences in fire severities in Nattai National Park, south-west of Sydney, this paper considers: (1) the links between fire severity based on SPOT image analysis and ground observation of fire severity and repellency; (2) the textural and organic/minerogenic characteristics of eroded sediment; and (3) erodibility, erosion and deposition of soils in both catchments. Ground surveys show that image analysis reflects well the degree of vegetation consumption by fire, but cannot adequately predict the degree of ground litter consumption, associated soil heating and repellency effects. Fire had varying effects on repellency, leaving it unchanged, destroying it or enhancing it, depending on the soil temperature reached. The main post-fire hydrogeomorphological changes have been widespread erosion and colluvial and alluvial deposition of topsoil in foot-slope locations and river systems, but only localised redistribution of the highly erodible, repellent sandy subsurface layer. The fire did not trigger major geomorphological change in the study area, but fires probably cause important topsoil and nutrient depletion and may also affect water quality.     

Statewide Estimates of Undiscovered Deposits of Gold,Silver, Copper,Lead, and Zinc

Estimates of the number of undiscovered deposits on a statewide basis offer a different perspective on the nation's undiscovered resources of gold, silver, copper, lead, and zinc. Mean estimates of the number of undiscovered deposits statewide were extracted from the estimates of undiscovered deposits nationwide. More than 50 undiscovered deposits are estimated to occur in Alaska, Arizona, Nevada, and Wisconsin. Estimating the number of undiscovered deposits statewide serves as a measure of a state's total remaining mineral resources in known conventional deposit types.     

Study on uncertainty of inversion and resolution limit in the presence of noise

This study analyzed the uncertainty of inversion and the resolution limit in the presence of noise by means of statistical experiments. The exhaustive method is adopted to obtain the global optimal solution in each experiment. We found that even with small level of noise, solutions fluctuate in a large range for the thin bed. The distribution of solutions in the presence of noise is closely related to the spread of the cost function in the absence of noise. As a result, the area of a certain neighborhood around the true solution on the spread of the cost function in the absence of noise is used to evaluate the uncertainty of inversion and the resolution limit in the presence of noise. In the case that the SNR (signal-to-noise ratio) is 5 in this study, solutions focus around the true solution with a very small uncertainty only when the bed thickness is greater than the reciprocal of the double predominant frequency of the convoluting wavelet.     

Particle transport and distribution on the Mars Science Laboratory mission: Effects of triboelectric charging

We report on the nature of fine particle (<150 μm) transport under simulated martian conditions, in order to better understand the Mars Science Laboratory’s (MSL) sample acquisition, processing and handling subsystem (SA/SPaH). We find that triboelectric charging due to particle movement may have to be controlled in order for successful transport of fines that are created within the drill, processed through the Collection and Handling for In situ Martian Rock Analysis (CHIMRA) sample handing system, and delivered to the Sample Analysis at Mars (SAM) and Chemistry and Mineralogy (CheMin) instruments. These fines will be transferred from the surface material to the portioner, a 3 mm diameter, 8 mm deep distribution center where they will drop ∼2 cm to the instrument inlet funnels. In our experiments, movement of different material including terrestrial analogs and martian soil simulants (Mars Mojave Simulant - MMS) resulted in 1-7 nanocoulombs of charge to build up for several different experimental configurations. When this charging phenomenon occurs, several different results are observed including particle clumping, adherence of material on conductive surfaces, or electrostatic repulsion, which causes like-charged particles to move away from each other. This electrostatic repulsion can sort samples based upon differing size fractions, while adhesion causes particles of different sizes to bind into clods. Identifying these electrostatic effects can help us understand potential bias in the analytical instruments and to define the best operational protocols to collect samples on the surface of Mars.     

An inter-comparison of tidal solutions computed with a range of unstructured grid models of the Irish and Celtic Sea Regions

Three finite element codes, namely TELEMAC, ADCIRC and QUODDY, are used to compute the spatial distributions of the M₂, M₄ and M₆ components of the tide in the sea region off the west coast of Britain. This region is chosen because there is an accurate topographic dataset in the area and detailed open boundary M₂ tidal forcing for driving the model. In addition, accurate solutions (based upon comparisons with extensive observations) using uniform grid finite difference models forced with these open boundary data exist for comparison purposes. By using boundary forcing, bottom topography and bottom drag coefficients identical to those used in an earlier finite difference model, there is no danger of comparing finite element solutions for “untuned unoptimised solutions” with those from a “tuned optimised solution”. In addition, by placing the open boundary in all finite element calculations at the same location as that used in a previous finite difference model and using the same M₂ tidal boundary forcing and water depths, a like with like comparison of solutions derived with the various finite element models was possible. In addition, this open boundary was well removed from the shallow water region, namely the eastern Irish Sea where the higher harmonics were generated. Since these are not included in the open boundary, forcing their generation was determined by physical processes within the models. Consequently, an inter-comparison of these higher harmonics generated by the various finite element codes gives some indication of the degree of variability in the solution particularly in coastal regions from one finite element model to another. Initial calculations using high-resolution near-shore topography in the eastern Irish Sea and including “wetting and drying” showed that M₂ tidal amplitudes and phases in the region computed with TELEMAC were in good agreement with observations. The ADCIRC code gave amplitudes about 30 cm lower and phases about 8° higher. For the M₄ tide, in the eastern Irish Sea amplitudes computed with TELEMAC were about 4 cm higher than ADCIRC on average, with phase differences of order 5°. For the M₆ component, amplitudes and phases showed significant small-scale variability in the eastern Irish Sea, and no clear bias between the models could be found. Although setting a minimum water depth of 5 m in the near-shore region, hence removing wetting and drying, reduced the small-scale variability in the models, the differences in M₂ and M₄ tide between models remained. For M₆, a significant reduction in variability occurred in the eastern Irish Sea when a minimum 5-m water depth was specified. In this case, TELEMAC gave amplitudes that were 1 cm higher and phases 30° lower than ADCIRC on average. For QUODDY in the eastern Irish Sea, average M₂ tidal amplitudes were about 10 cm higher and phase 8° higher than those computed with TELEMAC. For M₄, amplitudes were approximately 2 cm higher with phases of order 15° higher in the northern part of the region and 15° lower in the southern part. For M₆ in the north of the region, amplitudes were 2 cm higher and about 2 cm lower in the south. Very rapid M₆ tidal-phase changes occurred in the near-shore regions. The lessons learned from this model inter-comparison study are summarised in the final section of the paper. In addition, the problems of performing a detailed model–model inter-comparison are discussed, as are the enormous difficulties of conducting a true model skill assessment that would require detailed measurements of tidal boundary forcing, near-shore topography and precise knowledge of bed types and bed forms. Such data are at present not available.     

Prospects for astrometry with the Hubble Space Telescope

The Hubble Space Telescope (HST), a large optical telescope having an aperture of 2.4 meters and a length of 8.8 meters, is being developed by the National Aeronautics and Space Administration. This telescope will be placed into earth orbit by the space shuttle. Astrometric observations with the HST are made using a Fine Guidance Sensor which is capable of measuring the position of one object relative to another with an accuracy of ±0.002 arcseconds. The astrometric user of HST will be provided with an Astrometric Data Reduction Software package (ADRS). The variety of astrometric problems to be investigated with HST is discussed.     

Connection Between Chromospheric Events and Photospheric Dynamics

We analyzed chromospheric events and their connection to oscillation phenomena and photospheric dynamics. The observations were done with the New Solar Telescope of Big Bear Solar Observatory using a broad-band imager at the wavelength of a TiO band and FISS spectrograph scanning Ca?ii and Hα spectral lines. The event in Ca?ii showed strong plasma flows and propagating waves in the chromosphere. The movement of the footpoints of flux tubes in the photosphere indicated flux tube entanglement and magnetic reconnection as a possible cause of the observed brightening and waves propagating in the chromosphere. An upward propagating train of waves was observed at the site of the downflow event in Hα. There was no clear relationship between photospheric waves and the Ca?ii and Hα events. Our observations indicate that chromospheric waves that were previously thought to originate from the photosphere may be generated by some events in the chromosphere as well.     

The shielding effect of small-scale martian surface geometry on ultraviolet flux

The atmosphere of Mars does little to attenuate incoming ultraviolet (UV) radiation. Large amounts of UV radiation sterilize the hardiest of terrestrial organisms within minutes, and chemically alter the soil such that organic molecules at or near the surface are rapidly destroyed. Thus the survival of any putative martian life near the surface depends to a large extent on how much UV radiation it receives. Variations in small-scale geometry of the surface such as pits, trenches, flat faces and overhangs can have a significant effect on the incident UV flux and may create “safe havens” for organisms and organic molecules. In order to examine this effect, a 1-D radiative transfer sky model with 836 meshed points (plus the Sun) was developed which includes both diffuse and direct components of the surface irradiance. This model derives the variation of UV flux with latitude and an object's Geometric Shielding Ratio (a ratio which describes the geometry of each situation). The best protection is offered by overhangs with flux reduced to a factor of 1.8±0.2×10⁻⁵ of the unprotected value, a reduction which does not vary significantly by latitude. Pits and cracks are less effective with a reduction in UV flux of only up to 4.5±0.5×10⁻³ for the modeled scenarios; however, they are more effective for the same geometric shielding ratio than overhangs at high latitudes due to the low height of the Sun in the sky. Lastly, polar faces of rocks have the least effective shielding geometry with at most a 1.1±0.1×10⁻¹ reduction in UV flux. Polar faces of rocks are most effective at mid latitudes where the Sun is never directly overhead, as at tropical latitudes, and never exposes the back of the rock, as at polar latitudes. In the most favorable cases, UV flux is sufficiently reduced such that organic in-fall could accumulate beneath overhanging surfaces and in pits and cracks. As well, hardy terrestrial microorganisms such as Bacillus pumilus could persist for up to 100 sols on the outer surfaces of typical spacecraft or several tens of martian years in the most shielded surface niches.     

Reconstruction of cropland spatial patterns and its spatiotemporal changes over the 20th century on the Songnen Plain,Northeast China

We initially estimated the cropland area at county level using local historical documents for the Songnen Plain (SNP) in the 1910s and 1930s. We then allocated this cropland area to grid cells with a size of 1 km × 1 km, using a range of cultivation possibilities from high to low; this was based on topography and minimum distances to rivers, settlements, and traffic lines. Cropland areas for the 1950s were obtained from the Land Use Map of Northeast China, and map vectorization was performed with ArcGIS technology. Cropland areas for the 1970s, 1980s, 1990s, 2000s, and 2010s were retrieved from Landsat images. We found that the cropland areas were 4.92 × 10⁴ km² and 7.60 × 10⁴ km², accounting for 22.8% and 35.2% of the total area of the SNP in the 1910s and 1930s, respectively, which increased to 13.14 × 10⁴ km², accounting for 60.9% in the 2010s. The cropland increased at a rate of 1.18 × 10⁴ km² per decade from the 1910s to 1970s while it was merely 0.285 × 10⁴ km² per decade from the 1970s to 2010s. From the 1910s to 1930s, new cultivation mainly occurred in the central SNP while, from the 1930s to 1970s, it was mainly over the western and northern parts. This spatially explicit reconstruction could be offered as primary data for studying the effects of changes in human-induced land cover based on climate change over the last century.     

The critical inclination problem — 30 years of progress

The critical inclination problem in artificial satellite theory, first discovered 30 years ago, has aroused great interest and provoked much discussion and controversy in the intervening years. It was this problem which essentially provided the seed corn for the development of the theory of the Ideal Resonance Problem (IRP). The latter theory provides good first-approximation solutions to a number of important resonance problems in celestial mechanics. It is not applicable, however, to certain other interesting resonant systems within the solar system. For these resonances a new fundamental mathematical model of resonance, in the spirit of the IRP, has recently been formulated and successfully applied.This paper reviews the history of the critical inclination problem and highlights the controversies it has generated over the years. The Problem's strong connection with the IRP is outlined with both thenormal andabnormal forms featuring. Finally, with reference to the critical inclination problem, the essential properties of the newer fundamental model are described and compared with the IRP. A strong correspondence is established between recent independent investigations of a variety of resonance problems and earlier work of Andoyer.