Morphological Variation of the Sea Silverside Odontesthes regia in Regions with Dissimilar Upwelling Intensity along the Humboldt Current System

Ocean Science Journal - We evaluated the influence of areas with dissimilar upwelling intensity along the Humboldt Current System on the morphological variation of the economically important sea...     

Cold seep communities in the deep eastern Mediterranean Sea: composition, symbiosis and spatial distribution on mud volcanoes

Two mud volcano fields were explored during the French–Dutch MEDINAUT cruise (1998) with the submersible NAUTILE, one south of Crete along the Mediteranean Ridge at about 2000 m depth (Olimpi mud field) and the other south of Turkey between 1700 and 2000 m depth (Anaximander mud field) where high methane concentrations were measured. Chemosynthetic communities were observed and sampled on six mud volcanoes and along a fault scarp. The communities were dominated by bivalves of particularly small size, belonging to families commonly found at seeps (Mytilidae, Vesicomyidae, Thyasiridae) and to Lucinidae mostly encountered in littoral sulfide-rich sediments and at the shallowest seeps. Siboglinid polychaetes including a large vestimentiferan Lamellibrachia sp. were also associated. At least four bivalve species and one siboglinid are associated with symbiotic chemoautotrophic bacteria, as evidenced by Transmission Electronic Microscopy and isotopic ratio measurements. Among the bivalves, a mytilid harbors both methanotrophic and sulfide-oxidizing bacteria. Video spatial analysis of the community distribution on three volcanoes shows that dense bivalve shell accumulations (mainly lucinids) spread over large areas, from 10% to 38% of the explored areas (2500–15000 m²) on the different volcanoes. Lamellibrachia sp. had different spatial distribution and variable density in the two mud volcano fields, apparently related with higher methane fluxes in the Anaximander volcanoes and maybe with the instability due to brines in the Olimpi area. The abundance and richness of the observed chemosynthetic fauna and the size of some of the species contrast with the poverty of the deep eastern Mediterranean. The presence of a specialized fauna, with some mollusk genera and species shared with other reduced environments of the Mediterranean, but not dominated by the large bivalves usually found at seeps, is discussed.     

Geological risk assessment of the area surrounding Altamira Cave: A proposed Natural Risk Index and Safety Factor for protection of prehistoric caves

Altamira Cave occurs in a carbonate sequence-dated as middle to upper Cenomanian, being characterized by tabular bedding. This sequence has been studied in detail and mapped in an attempt to delimit the beds in which the cave was formed. The cave forms part of a karstic complex developed in the Altamira Formation, which consists of eight stratigraphic units characterized by karstic forms and landslides as the main geomorphologic elements. The strong relationship between sinkholes and faults within the area was also revealed, with sinkholes of oval morphology aligned along the faults. Inside the cave, the subhorizontal bedding is intersected by subvertical joints, generating geometrical blocks prone to falling down. This is the main process of the present evolution of the cave in addition to the dissolution and precipitation of carbonates in local zones. We used this geological characterization as the basis for the definition of protection areas around prehistoric caves, applied in this article to the Altamira Cave. Landslides, water flow towards the cave, rock falls within cave and karstic features are the main geological risks affecting the karstic complex. Two semi-quantitative indexes were proposed, the Natural Risk Index (NRI) and Safety Factor (SF), with the main aim of determining the risk level in different zones of the study area. The information provided by geological studies as well as the results obtained using the proposed indexes allowed definition suitable protection areas around the cave.     

A sequential extraction to determine the distribution of apatite in granitoid soil mineral pools with application to weathering at the Hubbard Brook Experimental Forest,NH, USA

Mineral weathering in soils is an important source of many nutrients to forest ecosystems. Apatite, a Ca phosphate mineral, occurs in trace amounts in virtually all igneous and metamorphic rocks and is often found as small mineral inclusions in more weathering-resistant silicate minerals. To better understand the distribution of apatite in soils and its exposure to soil solutions, a sequential extraction method was developed to selectively dissolve minerals from soils so that the amount of apatite in contact with soil solutions versus that armored by silicate minerals could be quantified. The use of three molarities of HNO₃ (0.01, 0.1 and 1 M) at three temperatures (0, 10, or 20 °C) was explored and it was found that apatite congruently dissolved in 1 M HNO₃ at all three temperatures, but did not completely dissolve in weaker HNO₃ solutions. Soil horizons, glacial till (i.e., soil parent material), and individual minerals separated from till collected from the Hubbard Brook Experimental Forest (HBEF), NH, were subjected to a 4-step sequential extraction. Chemical analyses of the extracts indicate that 1 M NH₄Cl (pH 7; 20 °C) removes exchangeable ions, 1 M HNO₃ at 20 °C primarily dissolves apatite in contact with solutions, 1 M HNO₃ at 200 °C primarily dissolves biotite and chlorite (and apatite armored by them), and a mixture of concentrated HNO₃, HCl, and HF at 200 °C dissolves the more refractory minerals including muscovite, alkali feldspar, plagioclase feldspar and quartz (and apatite armored by these minerals). This extraction method was applied to soil profiles from HBEF to demonstrate that it could be used to interpret the abundance of apatite and other minerals as a function of depth. Approximately 70% of the apatite in the HBEF soil parent material is exposed to soil solutions; the remaining 30% is armored in more weathering-resistant micas and feldspars. In the upper soil horizons, the only apatite that has not been weathered from the soil occurs as inclusions in micas and feldspars and thus the rate of dissolution of apatite in weathered soil horizons is controlled by silicate mineral dissolution.     

The spectral variations of the O-type runaway supergiant HD 188209

We report spectral time series of the late O-type runaway supergiant HD 188209. Radial velocity variations of photospheric absorption lines with a possible quasi-period of ∼6.4 d have been detected in high-resolution echelle spectra. Night-to-night variations in the position and strength of the central emission reversal of the H α profile occurring over ill-defined time-scales have been observed. The fundamental parameters of the star are derived using state-of-the-art plane-parallel and unified non-LTE model atmospheres, the latter including the mass-loss rate. The derived helium abundance is moderately enhanced with respect to solar, and the stellar masses are lower than those predicted by the evolutionary models. The binary nature of this star is not suggested either from Hipparcos photometry or from radial velocity curves.     

Ammonia observations of the nearby molecular cloud MBM 12

We present NH₃(1,1) and (2,2) observations of MBM 12, the closest known molecular cloud (65-pc distance), aimed at finding evidence for on-going star formation processes. No local temperature (with a T _rot upper limit of 12 K) or linewidth enhancement is found, which suggests that the area of the cloud that we have mapped (15-arcmin size) is not currently forming stars. Therefore this nearby 'starless' molecular gas region is an ideal laboratory to study the physical conditions preceding new star formation.
A radio continuum source has been found in Very Large Array archive data, close to but outside the NH₃ emission. This source is likely to be a background object.     

Fault plane orientations of microearthquakes at Mt. Etna from the inversion of P-wave rise times

A crucial point in the analysis of tectonic earthquakes occurring in a volcanic area is the inference of the orientation of the structures along which the ruptures occur. These structures represent zones of weakness which could favor the migration of melt toward the surface and the assessment of their geometry is a fundamental step toward efficient evaluation of volcanic risk. We analyzed a high-quality dataset of 171 low-magnitude, tectonic earthquakes that occurred at Mt. Etna during the 2002–2003 eruption. We applied a recently developed technique aimed at inferring the source parameters (source size, dip and strike fault) and the intrinsic quality factor Q_p of P waves from the inversion of rise times. The technique is based on numerically calibrated relationships among the rise time of first P waves and the source parameters for a circular crack rupturing at a constant velocity. For the most of the events the directivity source effect did not allow us to constrain the fault plane orientation. For a subset of 45 events with well constrained focal mechanisms we were able to constrain the “true” fault plane orientation. The level of resolution of the fault planes was assessed through a non linear analysis based on the random deviates technique. The significance of the retrieved fault plane solutions and the fit of the assumed source model to data were assessed through a χ-square test. Most of the retrieved fault plane solutions agree with the geometrical trend of known surface faults. The inferred source parameters and Q_p are in agreement with the results of previous studies.     

Creating usable science: Opportunities and constraints for climate knowledge use and their implications for science policy

In the past several decades, decision makers in the United States have increasingly called upon publicly funded science to provide “usable” information for policy making, whether in the case of acid rain, famine prevention or climate change policy. As demands for usability become more prevalent for publicly accountable scientific programs, there is a need to better understand opportunities and constraints to science use in order to inform policy design and implementation. Motivated by recent critique of the decision support function of the US Global Change Research Program, this paper seeks to address this issue by specifically examining the production and use of climate science. It reviews empirical evidence from the rich scholarship focused on climate science use, particularly seasonal climate forecasts, to identify factors that constrain or foster usability. It finds, first, that climate science usability is a function both of the context of potential use and of the process of scientific knowledge production itself. Second, nearly every case of successful use of climate knowledge involved some kind of iteration between knowledge producers and users. The paper argues that, rather than an automatic outcome of the call for the production of usable science, iterativity is the result of the action of specific actors and organizations who ‘own’ the task of building the conditions and mechanisms fostering its creation. Several different types of institutional arrangements can accomplish this task, depending on the needs and resources available. While not all of the factors that enhance usability of science for decision making are within the realm of the scientific enterprise itself, many do offer opportunities for improvement. Science policy mechanisms such as the level of flexibility afforded to research projects and the metrics used to evaluate the outcomes of research investment can be critical to providing the necessary foundation for iterativity and production of usable science to occur.     

Estimating flash flood discharge in an ungauged mountain catchment with 2D hydraulic models and dendrogeomorphic palaeostage indicators

There is still wide uncertainty about past flash‐flood processes in mountain regions owing to the lack of systematic databases on former events. This paper presents a methodology to reconstruct peak discharge of flash floods and illustrates a case in an ungauged catchment in the Spanish Central System. The use of dendrogeomorphic evidence (i.e. scars on trees) together with the combined use of a two‐dimensional (2D) numerical hydraulic model and a terrestrial laser scan (TLS) has allowed estimation of peak discharge of a recent flash flood. The size and height distribution of scars observed in the field have been used to define three hypothetical scenarios (S_min or minimum scenario; S_med or medium scenario; and S_max or maximum scenario), thus illustrating the uncertainty involved in peak‐discharge estimation of flash floods in ungauged torrents. All scars analysed with dendrogeomorphic techniques stem from a large flash flood which took place on 17 December 1997. On the basis of the scenarios, peak discharge is estimated to 79 ± 14 m³ s^?1. The average deviation obtained between flood stage and expected scar height was ? 0·09 ± 0·53 m. From the data, it becomes obvious that the geomorphic position of trees is the main factor controlling deviation rate. In this sense, scars with minimum deviation were located on trees growing in exposed locations, especially on unruffled bedrock where the model predicts higher specific kinetic energy. The approach used in this study demonstrates the potential of tree‐ring analysis in palaeohydrology and for flood‐risk assessment in catchments with vulnerable goods and infrastructure. Copyright © 2010 John Wiley & Sons, Ltd.