Reproduction of Donax venustus Poli 1795, Donax semistriatus Poli 1795 and Intermediate Morphotypes (Bivalvia: Donacidae) in the Littoral of Málaga (Southern Spain)

The reproduction and sexual cycles of Donax venustus Poli 1795, Donax semistriatus Poli 1795, and individuals with intermediate shell morphotypes were studied in the littoral of Málaga (Southern Spain) from February 1990 to January 1991, using histology and analysing the changes in flesh dry weight. The littoral of Málaga has mild seawater temperatures and several upwellings with high levels of chlorophyll a. Due to these environmental conditions, the reproductive periods of these bivalve species are very extensive, from February to November. The histological study shows asynchronous sexual cycles, with continuous but partial individual spawnings from April to November in about 50% of the D. semistriatus population, and percentages higher than 40% of the sample in most months for D. venustus. An important decrease in the ratio flesh dry weight/length³ was noted from June to August in the three populations; this is apparently related with peaks of spawning. Based on the macroscopic observation of the gonads, on the flesh dry weight study and on histological data, the sexual cycle of the intermediate morphotypes is simultaneous and similar throughout the year with those of D. venustus and D. semistriatus .     

Seasonal copula models for the analysis of glacier discharge at King George Island,Antarctica

Modelling glacier discharge is an important issue in hydrology and climate research. Glaciers represent a fundamental water resource when melting of ice and snow contributes to runoff. Glaciers are also studied as natural global warming sensors. GLACKMA association has implemented one of their Pilot Experimental Catchment areas at the King George Island in the Antarctica which records values of the liquid discharge from Collins glacier. In this paper, we propose the use of time-varying copula models for analyzing the relationship between air temperature and glacier discharge, which is clearly non constant and non linear through time. A seasonal copula model is defined where both the marginal and copula parameters vary periodically along time following a seasonal dynamic. Full Bayesian inference is performed such that the marginal and copula parameters are estimated in a one single step, in contrast with the usual two-step approach. Bayesian prediction and model selection is also carried out for the proposed model such that Bayesian credible intervals can be obtained for the conditional glacier discharge given a value of the temperature at any given time point. The proposed methodology is illustrated using the GLACKMA real data where there is, in addition, a hydrological year of missing discharge data which were not possible to measure accurately due to problems in the sounding.     

Transport of moderately sorted gravel at low bed shear stresses: The role of fine sediment infiltration

A reliable estimation of sediment transport in gravel‐bed streams is important for various practical engineering and biological studies (e.g., channel stability design, bed degradation/aggradation, restoration of spawning habitat). In the present work, we report original laboratory experiments investigating the transport of gravel particles at low bed shear stresses. The laboratory tests were conducted under unsteady flow conditions inducing low bed shear stresses, with detailed monitoring of the bed topography using a laser scanner. Effects of bed surface arrangements were documented by testing loose and packed bed configurations. Effects of fine sediments were examined by testing beds with sand, artificial fine sand or cohesive silt infiltrated in the gravel matrix. Analysis of the experimental data revealed that the transport of gravel particles depends upon the bed arrangement, the bed material properties (e.g., size and shape, consolidation index, permeability) and the concentration of fine sediments within the surface layer of moving grains. This concentration is directly related to the distribution of fine particles within the gravel matrix (i.e., bottom‐up infiltration or bridging) and their transport mode (i.e., bedload or suspended load). Compared to loose beds, the mobility of gravel is reduced for packed beds and for beds clogged from the bottom up with cohesive fine sediments; in both cases, the bed shear stress for gravel entrainment increases by about 12%. On the other hand, the mobility of gravel increases significantly (bed shear stress for particle motion decreasing up to 40%) for beds clogged at the surface by non‐cohesive sand particles. Copyright © 2017 John Wiley & Sons, Ltd.     

Dating lava flows of tropical volcanoes by means of spatial modeling of vegetation recovery

The age of past lava flows is crucial information for evaluating the hazards and risks posed by effusive volcanoes, but traditional dating methods are expensive and time‐consuming. This study proposes an alternative statistical dating method based on remote sensing observations of tropical volcanoes by exploiting the relationship between lava flow age and vegetation cover. First, the factors controlling vegetation density on lava flows, represented by the normalized difference vegetation index (NDVI), were investigated. These factors were then integrated into pixel‐based multi‐variable regression models of lava flow age to derive lava flow age maps. The method was tested at a pixel scale on three tropical African volcanoes with considerable recent effusive activity: Nyamuragira (Democratic Republic of Congo), Mt Cameroon (Cameroon) and Karthala (the Comoros). Due to different climatic and topographic conditions, the parameters of the spatial modeling are volcano‐specific. Validation suggests that the obtained statistical models are robust and can thus be applied for estimating the age of unmodified undated lava flow surfaces for these volcanoes. When the models are applied to fully vegetated lava flows, the results should be interpreted with caution due to the saturation of NDVI. In order to improve the accuracy of the models, when available, spatial data on temperature and precipitation should be included to directly represent climatic variation. Copyright © 2017 John Wiley & Sons, Ltd.     

Coastal ridge constructive processes at a multi-decadal scale in Barreta Island (southern Portugal)

Multiple ridges across prograding coasts may display variable geometries, commonly expressed through varying elevations. Changes in ridge elevation have been traditionally related to the occurrence of fluctuating progradation rates, which might, in turn, be driven by shifting environmental conditions. Here, we explore the geometry and growth mechanisms of multiple ridges, generated at Barreta Island (Ria Formosa, southern Portugal), as a consequence of the rapid progradation of the island over the last 70 years, following the artificial fixation of the downdrift Faro-Olhão inlet with jetties in 1955. The variability in the morphology of these features was analysed in combination with available wind and wave data, in order to better distinguish growth mechanisms and understand the main parameters determining the final geometry of the observed ridges. The results suggest that (1) most of the identified ridges fall in the beach ridge classification, as they have been mostly built by marine processes, and (2) the parameters derived from, or closely related to wave climate variability (e.g. progradation rates, storm occurrence) can jointly explain most of the observed morphological changes, while aeolian processes played a secondary role. Indeed, ridge geometry appears mainly controlled by progradation rates, with higher ridges associated with lower progradation rates. Progradation rate, in turn, is mostly related to longshore wave power, storminess, and the occurrence storm groups. Yet, the final configuration of ridges can also be affected by runup levels and onshore winds. Therefore, establishing the relation between ridge geometry and wave climate is not a straightforward task, because of the complex processes and interactions that control coastal morphodynamics. © 2019 John Wiley & Sons, Ltd.     

Large Earthquakes at the Ibero-Maghrebian Region: Basis for an EEWS

Large earthquakes (M_w > 6, I_max > VIII) occur at the Ibero-Maghrebian region, extending from a point (12ºW) southwest of Cape St. Vincent to Tunisia, with different characteristics depending on their location, which cause considerable damage and casualties. Seismic activity at this region is associated with the boundary between the lithospheric plates of Eurasia and Africa, which extends from the Azores Islands to Tunisia. The boundary at Cape St. Vincent, which has a clear oceanic nature in the westernmost part, experiences a transition from an oceanic to a continental boundary, with the interaction of the southern border of the Iberian Peninsula, the northern border of Africa, and the Alboran basin between them, corresponding to a wide area of deformation. Further to the east, the plate boundary recovers its oceanic nature following the northern coast of Algeria and Tunisia. The region has been divided into four zones with different seismic characteristics. From west to east, large earthquake occurrence, focal depth, total seismic moment tensor, and average seismic slip velocities for each zone along the region show the differences in seismic release of deformation. This must be taken into account in developing an EEWS for the region.     

Applying Fractal Dimensions and Energy-Budget Analysis to Characterize Fracturing Processes During Magma Migration and Eruption: 2011–2012 El Hierro (Canary Islands) Submarine Eruption

The impossibility of observing magma migration inside the crust obliges us to rely on geophysical data and mathematical modelling to interpret precursors and to forecast volcanic eruptions. Of the geophysical signals that may be recorded before and during an eruption, deformation and seismicity are two of the most relevant as they are directly related to its dynamic. The final phase of the unrest episode that preceded the 2011–2012 eruption on El Hierro (Canary Islands) was characterized by local and accelerated deformation and seismic energy release indicating an increasing fracturing and a migration of the magma. Application of time varying fractal analysis to the seismic data and the characterization of the seismicity pattern and the strain and the stress rates allow us to identify different stages in the source mechanism and to infer the geometry of the path used by the magma and associated fluids to reach the Earth’s surface. The results obtained illustrate the relevance of such studies to understanding volcanic unrest and the causes that govern the initiation of volcanic eruptions.     

Study of the Interaction Mechanism in the Biosorption of Copper(II) Ions onto Posidonia oceanica and Peat

A systematic approach was used to characterize the biosorption of copper(II) onto two biosorbents, Posidonia oceanica and peat, focusing on the interaction mechanisms, the copper(II) sorption–desorption process and the thermal behavior of the biosorbents. Sorption isotherms at pH 4–6 were obtained and the experimental data were fitted to the Langmuir model with a maximum uptake (q_max) at pH 6 of 85.78 and 49.69 mg g^?1, for P. oceanica and peat, respectively. A sequential desorption (SD) with water, Ca(NO₃)₂, and EDTA was applied to copper‐saturated biosorbents. Around 65–70% copper(II) were desorbed with EDTA, indicating that this heavy metal was strongly bound. The reversibility of copper(II) sorption was obtained by desorption with HCl and SD. Fourier transform IR spectroscopy (FTIR) analysis detected the presence of peaks associated with OH groups in aromatic and aliphatic structures, CH, CH₂, and CH₃ in aliphatic structures, COO^? and COOH groups and unsaturated aromatic structures on the surface of both biosorbents, as well as peaks corresponding to Si? O groups on the surface of peat. The results of SEM‐EDX and FTIR analysis of copper‐saturated samples demonstrated that ion exchange was one of the mechanisms involved in copper(II) retention. Thermal analysis of biosorbent samples showed that copper(II) sorption–desorption processes affected the thermal stability of the biosorbents.     

Coral communities and reefs from Guerrero,Southern Mexican Pacific

Corals in the Eastern Pacific extend south from the Gulf of California to Ecuador and oceanic Chile, and west from Colombia to Clipperton Atoll. Nevertheless, large stretches of the Mexican Pacific remain fundamentally unstudied. Therefore, to assess the current conditions of coral communities, a coastal fringe ～300 km long (17°40′ N, 101°39′ W to 16°46′ N, 99°49′ W) was surveyed within the Southern Mexican Pacific, between 2005 and 2009. Fifteen stony coral species were identified at 13 coral communities and six Pocillopora‐dominated fringing reefs, with Pocillopora verrucosa and Pocillopora damicornis the primary contributing taxa. Reef development was identified in embayments or behind rocks or islands that offered shelter from northern and northwestern winds. Observations of Pocillopora effusus, Pocillopora inflata, Porites lobata, Pavona clavus, and Pavona varians expanded the species known geographic ranges by several degrees of latitude, suggesting reef building fauna comprised a mixture of widespread and relatively rare Eastern Pacific corals. Results indicated greater live coral cover in the Ixtapa‐Zihuatanejo area (15–73%) than in the Acapulco localities, which had high algal dominance; the reefs in the latter region exhibited high erosion. Regional differences are likely the result of long‐standing anthropogenic pressures around Acapulco since 1950, when it became an important tourist destination. This paper is the first detailed report of ecologically stressed corals and coral reefs from the state of Guerrero on the Mexican Southern Pacific coast.