Geomagnetic paleosecular variation at Hawaii around 3 Ma from a sequence of 107 lava flows at Kaena Point (Oahu)

We have sampled a sequence of 107 lava flows in the Waianae series on Oahu, Hawaii, in two separate stretches. The first (51 flows) at Kaena Point extends from sea level to an altitude of 190 m, and the second (56 flows) follows the Satellite Tracking Station road from 218 m to 360 m above sea level. Thermal and af demagnetization yield very similar results, and reveal only normal polarities. K/Ar dating at five different horizons combined with the paleomagnetic results indicate that the sequence was emplaced entirely in the normal polarity interval between the Upper Mammoth and the Lower Kaena polarity transitions (3.22–3.11 Ma). Some of the flows are serially correlated. Filtering does not, however, drastically affect the final results. Inclinations are shallower than those expected from a centered dipole field. Although large (13°), the inclination anomaly is consistent with results from other sites at the same latitude. The scatter of the VGPs about the geographic pole is consistent with available data from other regions at similar latitudes. The scatter of the directions is also consistent with the predictions of recent statistical models of paleosecular variation. Therefore, these results do not support the hypothesis of a Pacific dipole window.     

Carbon dioxide degassing and thermal energy release in the Monte Amiata volcanic-geothermal area (Italy)

The quaternary volcanic complex of Mount Amiata is located in southern Tuscany (Italy) and represents the most recent manifestation of the Tuscan Magmatic Province. The region is characterised by a large thermal anomaly and by the presence of numerous CO₂-rich gas emissions and geothermal features, mainly located at the periphery of the volcanic complex. Two geothermal systems are located, at increasing depths, in the carbonate and metamorphic formations beneath the volcanic complex. The shallow volcanic aquifer is separated from the deep geothermal systems by a low permeability unit (Ligurian Unit). A measured CO₂ discharge through soils of 1.8 × 10⁹ mol a⁻¹ shows that large amounts of CO₂ move from the deep reservoir to the surface. A large range in δ¹³C_TDIC (−21.07 to +3.65) characterises the waters circulating in the aquifers of the region and the mass and isotopic balance of TDIC allows distinguishing a discharge of 0.3 × 10⁹ mol a⁻¹ of deeply sourced CO₂ in spring waters. The total natural CO₂ discharge (2.1 × 10⁹ mol a⁻¹) is slightly less than minimum CO₂ output estimated by an indirect method (2.8 × 10⁹ mol a⁻¹), but present-day release of 5.8 × 10⁹ mol a⁻¹ CO₂ from deep geothermal wells may have reduced natural CO₂ discharge. The heat transported by groundwater, computed considering the increase in temperature from the infiltration area to the discharge from springs, is of the same order of magnitude, or higher, than the regional conductive heat flow (>200 mW m⁻²) and reaches extremely high values (up to 2700 mW m⁻²) in the north-eastern part of the study area. Heat transfer occurs mainly by conductive heating in the volcanic aquifer and by uprising gas and vapor along fault zones and in those areas where low permeability cover is lacking. The comparison of CO₂ flux, heat flow and geological setting shows that near surface geology and hydrogeological setting play a central role in determining CO₂ degassing and heat transfer patterns.     

Contrasting regional discharge evolutions in the Amazon basin (1974–2004)

Former hydrological studies in the Amazon Basin generally describe annual discharge variability on the main stem. However, the downstream Amazon River only represents the mean state of the Amazonian hydrological system. This study therefore uses a new data set including daily discharge in 18 sub-basins to analyze the variability of regional extremes in the Amazon basin, after recalling the diversity of the hydrological annual cycles within the Amazon basin. Several statistical tests are applied in order to detect trends and breaks in the time series. We show that during the 1974–2004 period, the stability of the mean discharge on the main stem in Óbidos is explained by opposite regional features that principally involve Andean rivers: a decrease in the low stage runoff, particularly important in the southern regions, and an increase in the high stage runoff in the northwestern region. Both features are observed from the beginning of the nineties. These features are also observed in smaller meridian sub-basins in Peru and Bolivia. Moreover we show that the changes in discharge extremes are related to the regional pluriannual rainfall variability and the associated atmospheric circulation as well as to tropical large-scale climatic indicators.     

Seasonal temperatures for the past ∼400 years reconstructed from diatom and chironomid assemblages in a high-altitude lake (Lej da la Tscheppa,Switzerland)

We analysed a 42 cm long sediment record from Lej da la Tscheppa, a high-altitude lake (2,616 m a.s.l.) in the Upper Engadine valley (Switzerland) for subfossil diatoms, chironomids and pollen. The chronology of the top 21 cm of the record was established using ²¹⁰Pb analysis using a constant-rate-of-supply model, and validated with ¹³⁷Cs measurements and the content of spheroidal carbonaceous particles. A tentative chronology for the lower part of the core was obtained through extrapolation of the sedimentation rates in the uppermost part of the record. Pollen assemblages in the record reflect regional changes in forestation and land-use patterns in the Upper Engadine valley and show no evidence of significant local human activity in the lake’s catchment. Diatom assemblages record a distinct increase in planktonic taxa since the early 19th century, suggesting a decrease in the duration of ice-cover. In contrast, chironomid assemblages remained stable during a large part of the record. We applied an established chironomid-based July air temperature transfer function and a newly developed diatom-based spring air temperature transfer function to reconstruct past seasonal air temperature changes at Lej da la Tscheppa. The reconstructions indicate a diatom-inferred warming trend in spring temperatures during the past ca. 400 years, whereas chironomid-inferred summer temperatures suggest a slight cooling trend. These biota-based reconstructions are in good agreement with the centennial-scale temperature trend in an independent reconstruction of regional temperatures in the Upper Engadine region based on instrumental records and documentary proxy evidence from the Alps. Our results suggest that, in high-altitude lakes, independent chironomid- and diatom-based seasonal temperature reconstruction is possible and can be successfully used to track seasonal temperature trends.     

It starts at home? Climate policies targeting household consumption and behavioral decisions are key to low-carbon futures

Through their consumption behavior, households are responsible for 72% of global greenhouse gas emissions. Thus, they are key actors in reaching the 1.5 °C goal under the Paris Agreement. However, the possible contribution and position of households in climate policies is neither well understood, nor do households receive sufficiently high priority in current climate policy strategies. This paper investigates how behavioral change can achieve a substantial reduction in greenhouse gas emissions in European high-income countries. It uses theoretical thinking and some core results from the HOPE research project, which investigated household preferences for reducing emissions in four European cities in France, Germany, Norway and Sweden. The paper makes five major points: First, car and plane mobility, meat and dairy consumption, as well as heating are the most dominant components of household footprints. Second, household living situations (demographics, size of home) greatly influence the household potential to reduce their footprint, even more than country or city location. Third, household decisions can be sequential and temporally dynamic, shifting through different phases such as childhood, adulthood, and illness. Fourth, short term voluntary efforts will not be sufficient by themselves to reach the drastic reductions needed to achieve the 1.5 °C goal; instead, households need a regulatory framework supporting their behavioral changes. Fifth, there is a mismatch between the roles and responsibilities conveyed by current climate policies and household perceptions of responsibility. We then conclude with further recommendations for research and policy.     

Geochemistry of silicic magmas in the Macolod Corridor, SW Luzon, Philippines: evidence of distinct, mantle-derived, crustal sources for silicic magmas

Silicic volcanic deposits (>65 wt% SiO₂), which occur as domes, lavas and pyroclastic deposits, are relatively abundant in the Macolod Corridor, SW Luzon, Philippines. At Makiling stratovolcano, silicic domes occur along the margins of the volcano and are chemically similar to the silicic lavas that comprise part of the volcano. Pyroclastic flows are associated with the Laguna de Bay Caldera and these are chemically distinct from the domes and lavas at Makiling stratovolcano. As a whole, samples from the Laguna de Bay Caldera contain lower concentrations of MgO and higher concentrations of Fe₂O_3(t) than the samples from domes and lavas. The Laguna de Bay samples are more enriched in incompatible trace elements. The silicic rocks from the domes, Makiling Volcano and Laguna de Bay Caldera all contain high alkalis and high K₂O/Na₂O ratios. Melting experiments of primitive basalts and andesites demonstrate that it is difficult to produce high K₂O/Na₂O silicic magmas by fractional crystallization or partial melting of a low K₂O/Na₂O source. However, recent melting experiments (Sisson et al., Contrib Mineral Petrol 148:635–661, 2005) demonstrate that extreme fractional crystallization or partial melting of K-rich basalts can produce these silicic magmas. Our model for the generation of the silicic magmas in the Macolod Corridor requires partial melting of mantle-derived, evolved, moderate to K-rich, crystallized calc-alkaline magmas that ponded and crystallized in the mid-crust. Major and trace element variations, along with oxygen isotopes and ages of the deposits, are consistent with this model. Electronic Supplementary Material Supplementary material is available for this article at     

1D and 2D site amplification effects at Tarcento (Friuli,NE Italy), 30 years later

A temporary accelerometer network has been installed in Tarcento (Friuli, NE Italy), a small town heavily hit by the 1976–1977 Friuli earthquake sequence, as a part of an ongoing research project aimed at ground motion simulation and generation of shakemaps in the near-field of an earthquake. The network operated from October 2008 to April 2010 and consisted of three K2 accelerographs with internal Episensor, distributed over a linear array of about 1.5 km length. Tarcento town had been chosen, at the end of the 1970s, as the ideal site for a pilot microzonation study, the first of this kind in Italy, in which a substantial number of field (and laboratory) tests were carried out in order to assess the mechanical properties of local alluvium deposits and their complex (3D) geometrical configuration. The data from the temporary network, illustrated herein, allow for proper verification and review of some of the quantitative predictions formulated in the 1980 study. As argued in the discussion section, we also believe that the data are apt to provide valuable information of more general interest on the complex seismic response of alluvium-filled valleys, and we show therein how the observations can be interpreted in the light of presently available parametric simulation studies and simplified criteria for handling basin amplification effects.     

Runoff-generated debris flows: Observation of initiation conditions and erosion–deposition dynamics along the channel at Cancia (eastern Italian Alps)

In the Dolomitic region, abundant coarse hillslope sediment is commonly found at the toe of rocky cliffs. Ephemeral channels originate where lower permeability bedrock surfaces concentrate surface runoff. Debris flows initiate along such channels following intense rainfall and determine the progressive erosion and deepening of the channels. Sediment recharge mechanisms include rock fall, dry ravel processes and channel-bank failures. Here we document debris flow activity that took place in an active debris flow basin during the year 2015. The Cancia basin is located on the southwestern slope of Mount Antelao (3264 m a.s.l.) in the dolomitic region of the eastern Italian Alps. The 2.5 km² basin is incised in dolomitic limestone rocks. The data consist of repeated topographic surveys, distributed rainfall measurements, time-lapse (2 s) videos of two events and pore pressure measurements in the channel bed. During July and August 2015, two debris flow events occurred, following similarly intense rainstorms. We compared rainfall data to existing rainfall triggering thresholds and simulated the hydrological response of the headwater catchment with a distributed model in order to estimate the total and peak water discharge. Our data clearly illustrate how debris entrainment along the channel is the main contributor to the overall mobilized volume and that erosion is dominant when the channel slope exceeds 16°. Further downstream, sediment accumulation and depletion occurred alternately for the two successive events, indicating that sediment availability along the channel also influences the flow behaviour along the prevailing-transport reach. The comparison between monitoring data, topographical analysis and hydrological simulation allows the estimation of the average solid concentration of the two events and suggests that debris availability has a significant influence on the debris flow volume. © 2020 John Wiley & Sons, Ltd.     

Main differences between thrust belts

It is useful to differentiate between thrust belts that are related to east(E)-dipping or west(W)-dipping subduction. More precisely, these either follow or resist the overall ‘eastward’ mantle flow detected by the hot-spot reference frame. Because of the overall ‘westward’ drift of the lithosphere we find in E-dipping subduction that the basal decollement underlying the eastern plate reaches the surface and involves deep crustal rocks. With W-dipping subduction, however, we find that the basal decollement of the eastern plate is warped as well as subducted. Consequently thrust belts related to E- (or NE-) dipping subduction show conspicuous structural and morphologic relief, involve deep crustal rocks, and are associated with shallow foredeeps. On the other hand, thrust belts related to W- (or SW-) dipping subduction show relatively low structural and morphological relief, involve only shallow upper crustal rocks and are associated with deep foredeeps as well as back-arc extension. The accretionary wedge-foredeep-back-arc basin association is visualized as an overall eastward propagating tectonic wave. The accretionary wedge forms in the frontal parts and generally below sea-level. This is followed by forward migrating extension that cuts the earlier accretionary wedge. Typically such a system occurs in the context of overall W-dipping subduction and is characterized by an arcuate shape (e.g. Carpathians, Apennines, Barbados, etc.). Along the branches of the arc external transpression and internal transtension co-exist but with different sense (i.e. sinistral transpression contrasting with dextral transtension). We also observe that with W-dipping subduction the tangent to a pre- deformation marker is descending into the foredeep at an angle in the range of 1–10° while with E-(or NE-)dipping subduction the same marker would rise towards the hinterland with typical angles of about 5–10°. Foredeep subsidence is mainly controlled by the load of the thrust sheets in thrust belts due to E-(or NE-)dipping subduction and by the roll-back of the subduction hinge in accretionary wedges due to W-dipping subduction. Subsidence or uplift rates in the foredeeps and accretionary wedges related to the two different types of subduction are very different, providing different P-T-t paths in the two geodynamic realms. The present shape and structure of the thrust belts belonging to one of these two general types may help us in reconstructing the location of thinned lithosphere and basin evolution in the past.