A note on thermomechanical anisotropy of clays

Deep clays exhibit a pronounced strain anisotropy both during mechanical loading as well as during heating and cooling at constant stress in drained isotropic conditions. During mechanical loading vertical strain is larger than the horizontal one. During heating the vertical strain is larger than the horizontal one within the elastic range; the opposite is observed in the elasto-plastic range. The above described response can be interpreted adopting a consistent rotational, kinematic hardening thermo-elasto-plastic constitutive law.     

Overview of in-situ thermomechanical experiments in clay: Concept, results and interpretation

The HADES project (High Activity Disposal Experimental Site) aims at demonstrating the technical feasibility and the long-term safety of geological disposal of reprocessed HLW (High-Level Wastes) radioactive wastes. This disposal could be realised in the Tertiary Boom clay formation below the Mol/Dessel nuclear site. Previous studies in the 80's on the geomechanical behaviour of Boom clay, at host rock temperature (15°C), have demonstrated the mining capabilities of this clay. European partners have collaborated to increase the number of in-situ tests to be developed and operated from the Underground Research Facility (URF). Integrated large-scale experiments have been developed during the last four years, within the framework of the Commission of the European Communities (CEC) research contracts, in order to gain more insight into the thermal influence of heat-emiting wastes on the clay behaviour in the near field.

This paper summarizes the knowledge gained from the in-situ hydro-thermo-mechanical experiments realised from the URF. The objectives and main issues of the tests are described. Information regarding selection of parameters and representativeness of their measurements is discussed. Despite their different aims and designs, three hydro-thermo-mechanical experiments are compared in order to emphasize similarities in the general behaviour of the clay massif submitted to a thermal load. It is observed that its behaviour is qualitatively similar to the reaction upon a constant total stress increase. With the information now available, it is not obvious to draw conclusions with respect to the irreversibility of some phenomena.

Simple in-house analytical codes are able to simulate with a good accuracy the hydro-thermo-mechanical behaviour of clay. Nevertheless, these codes are not sufficient to describe the complexity of the phenomena that are involved in hydro-thermo-mechanical processes as pointed out by field data. In order to validate more complex models, the possibilities to improve the representativeness of the measurements are investigated.     

Thermomechanical properties of deep argillaceous formations

A difficulty in the interpretation of mechanical and thermo-mechanical tests on specimens drawn from large argillaceous formations is the strong inhomogeneity of void ratio, clay minerals and carbonates content.

In this paper a relationship is developed to link strength and the maximum preconsolidation stress to the initial void ratio and carbonate content. Compressibility is also correlated to carbonates.

Thermal strains in drained and undrained conditions for a Spanish, a belgian and an Italian natural clay are compared. In the elastic state strains are comparable, while in the plastic range thermal strains are highest for the Belgian clay, lower in the Spanish cemented clay and lowest in the Italian clay, very stiff and cemented.     

青藏高原东北地区现代降水中δD与δ^18O的关系研究

根据对取自青藏高原东北地区部分降水样中氢氧稳定同位素比率的分析，得到沱沱河站的大气水线（ＭＷＬ）为：δＤ＝８．２５δ＾１８Ｏ＋９．２２‰，与全球平均ＭＷＬ的差别较小；德令哈、西宁站的ＭＷＬ分别为：δＤ＝５．８６δ＾１８Ｏ－２７．２８‰和δＤ＝６．９６δ＾１８Ｏ－３０．１９‰，均与全球平均ＭＷＬ差别较大。这主要归因于水汽源地的非平衡蒸发和凝结物在非饱和大气中降落时的非平衡蒸发。上述地区的过量氘Ｅｘｄ     

秦岭核桃坝石炭系深水相遗迹化石,沉积环境和古地理分析

研究剖面位于陕西凤县核桃坝，构造上属秦岭造山带的商丹缝合带。核桃坝剖面下部为浅海陆棚相粉砂岩、泥灰岩和灰岩；中、上部以重力流沉积为主。在中部浊积岩中产遗迹化石：Ｎｅｒｅｉｔｅｓ ｆｅｎｇｘｉａｎｅｎｓｉｓ ｉｃｈｎｏｓｐ．ｎｏｖ．，Ａｃａｎｔｈｏｒｈａｐｈｅ ｃｆ． Ａ． ｉｎｃｅｒｔａ Ｋｓｉａｚｋｉｅｗｉｃｚ，Ｃｈｏｎｄｒｉｔｅｓ ｉｃｈｎｏｓｐ．，Ｐｌａｎｏｌｉｔｅｓ ｉｃｈｎｏｓｐ．等。其     

山东牟平邓格庄金矿的地球化学特征及成因

邓格庄大型石英脉型金矿，分布于燕山期昆嵛山花岗岩体内金牛山断裂带次级断裂中。成矿年龄１１８×１０６ａ，它比容矿岩体冷凝至３５０℃时还晚１２×１０６ａ。成矿深度小于１ｋｍ（约０．７５ｋｍ），而容矿岩体的定位深度大于１３ｋｍ，它们的定位深度差大于１２ｋｍ。成矿流体来自地壳深部，通过水－岩反应又从容矿岩体中萃取一部分金。故此金矿不是传统意义的岩浆期后热液矿床     

黑龙江省东部跃进山群中绿片岩的地球化学特征及地质意义

跃进山群出露位于佳木斯地块和那丹哈达地体之间，是完达山造山带的组成部分。它由大陆斜坡相沉积物、大洋中脊型玄武岩和洋岛型玄武岩组成，其中有镁铁－超镁铁质岩块体。它不是一个地层单位，而是与活动大陆边缘板块俯冲作用有关的蛇绿混杂岩     

南极乔治王岛中——新生代岩浆岩Sr—Nd—Pb同位素组成及源区特征

对乔治王岛１１个火山岩和２个侵入岩样品做了Ｓｒ－Ｎｄ－Ｐｂ同位素分析，其中（８７Ｓｒ／８６Ｓｒ）ｉ＝０．７０３２６～０．７０３９２，εＮｄ＝３．０２～６．７２，２０６Ｐｂ／２０４Ｐｂ＝１７．７７６～１８．５１５，２０７Ｐｂ／２０４Ｐｂ＝１５．．５０６～１５．５７１，２０８Ｐｂ／２０４Ｐｂ＝３７．８６８～３８．３０８。根据以上同位素组成及其相互关系并结合岩石学和微量元素特征及火山岩中熔融包裹体成分，得出以下结论：（１）研究的乔治王岛岩浆岩起源于亏损地幔（ＤＭＭ）和地幔流体交代成因的富集地幔ＥＭＩ混合形成的源区；（２）该源区具有广义Ｄｕｐａｌ异常，它正是由于ＥＭＩ组份加入即通过流体交代作用而产生的；（３）流体主要是俯冲深海沉积物脱碳酸盐作用而释放出的富ＣＯ２流体。     

内蒙古科尔康油田沙海组储集层的岩石学特征

根据碎屑岩铸体薄片和扫描电镜观察分析资料，研究了科尔康油田沙海组储集层的岩石学特征。科尔康油田沙海组储集层的岩石类型主要为岩屑砂岩和岩屑砂砾岩。碎屑岩的岩性特征对沙海组储集层的成岩作用具有显著的影响作用。