Experimental investigation of response stability and transition behaviour of a nonlinear ocean structural system

This study experimentally investigates the nonlinear response stability and transition behaviour of a submerged, moored ocean structural system which consists of a spherical buoy and attached multi-point mooring lines. The system is excited by a periodic wave field in a closed channel. System nonlinearities include complex geometric restoring (stiffness) force and coupled fluid-system interaction exciting forces. Experimental set-up, operating procedures and analysis of the measured results are presented. Characteristic motions observed include harmonic, subharmonic and ultraharmonic responses, which demonstrate a signature of the intricate pattern of the nonlinear global behaviour. Good agreements between the measured and most predicted responses are demonstrated in both time and frequency domains. These results confirm the validity of the analytical model presented and calibrate the accuracy of the existing numerical predictions. Primary and secondary resonances in the response are identified via frequency response curves. Response bifurcation cascades are observed in the experimental results and the possible existence of higher-order nonlinear responses is inferred.     

Effect of upward internal flow on dynamics of riser model subject to shear current

Numerical study about vortex-induced vibration(VIV) related to a flexible riser model in consideration of internal flow progressing inside has been performed.The main objective of this work is to investigate the coupled fluid-structure interaction(FSI) taking place between tensioned riser model,external shear current and upward-progressing internal flow(from ocean bottom to surface).A CAE technology behind the current research which combines structural software with the CFD technology has been proposed.According to the result from dynamic analysis,it has been found that the existence of upward-progressing internal flow does play an important role in determining the vibration mode(/dominant frequency),vibration intensity and the magnitude of instantaneous vibration amplitude,when the velocity ratio of internal flow against external current is relatively high.As a rule,the larger the velocity of internal flow is,the more it contributes to the dynamic vibration response of the flexible riser model.In addition,multi-modal vibration phenomenon has been widely observed,for asymmetric curvature along the riser span emerges in the case of external shear current being imposed.     

Modelling the long-term distribution of significant wave height with the Beta and Gamma models

The paper suggests modelling the long-term distribution of significant wave height with the Gamma, Beta of the first and second kind models. The three models are interrelated, flexible and cover the three different tail types of Extreme Value Theory. They can be used simultaneously as a means of assessing the uncertainty effects that result from choosing equally plausible models with different tail types. This procedure is intended for those applications that require the long-term distribution of significant wave height as input rather than the prediction of extreme values. The models are fitted to some significant wave data as an illustration. Details about maximum likelihood estimation are given in A.     

Submarine groundwater discharge and benthic biogeochemical zonation in the Huanghe River Estuary

Submarine groundwater discharge(SGD) has received increasing attention by studies on coastal areas; however,its effects on biogeochemical zonation have not been investigated to date. The Huanghe River Estuary(HRE) is a world class river estuary with high turbidity, and heavy human regulation. This study investigated how SGD is related to the benthic biogeochemistry of the HRE. Based on the distribution of several parameters(e.g., salinity,temperature, dissolved oxygen(DO) levels, p H, radium iso...     

Pockmarks in the inner Oslofjord,Norway

Multibeam bathymetric surveys of the Inner Oslofjord, Norway have revealed a high density of pockmarks in the 179-km² inner fjord area, which contains over 500 pockmarks of varying size, typically 20–50 m in diameter and 2–10 m deep. These pockmarks have been investigated with a variety of techniques, including acoustic subbottom profiling, sedimentological and geochemical analyses of cores, remotely operated vehicle observation, and morphometry. Both the distribution and shapes of the pockmarks suggest that they are related to structures in the bedrock underlying relatively thin (<50 m) unconsolidated glacial and postglacial sediments. The data provide no direct indication of a particular mode of pockmark formation, but release of large amounts of biogenic, shallow methane seems unlikely. Several lines of evidence point to a continuous process of pockmark formation followed by inactivity, with some pockmarks recently active whereas others have been inactive for a considerable time. Some pockmarks are characterised by coarse sediment in their centres. The density, variety and easy access make this pockmark field an ideal model area for pockmark research. John S. Gray is deceased.     

Describing and generating facies models for reservoir characterisation: 2D map view

This paper documents a new method for describing channel-related sedimentary deposits based on formal language theory. Using this method an analogue model of a sedimentary deposit can be encoded as a grammar. A program, called a parser, has been developed which can generate stochastic maps of these sedimentary deposits based on information in a specified grammar. The maps of sedimentary deposits generated by the parser have the same type, spatial arrangement, shape and size distribution as the analogue model. The successful generation of depositional maps represents a crucial step in the ongoing development of a new technique designed to generate 3D static geological models of sedimentary successions. The maps can be conditioned to match sparse hard data in the form of channel segments interpreted from seismic horizon maps.     

A predictive numerical model for potential mapping of the gas hydrate stability zone in the Gulf of Cadiz

This paper presents a computational model for mapping the regional 3D distribution in which seafloor gas hydrates would be stable, that is carried out in a Geographical Information System (GIS) environment. The construction of the model is comprised of three primary steps, namely: (1) the construction of surfaces for the various variables based on available 3D data (seafloor temperature, geothermal gradient and depth-pressure); (2) the calculation of the gas function equilibrium functions for the various hydrocarbon compositions reported from hydrate and sediment samples; and (3) the calculation of the thickness of the hydrate stability zone. The solution is based on a transcendental function, which is solved iteratively in a GIS environment.The model has been applied in the northernmost continental slope of the Gulf of Cadiz, an area where an abundant supply for hydrate formation, such as extensive hydrocarbon seeps, diapirs and fault structures, is combined with deep undercurrents and a complex seafloor morphology. In the Gulf of Cadiz, the model depicts the distribution of the base of the gas hydrate stability zone for both biogenic and thermogenic gas compositions, and explains the geometry and distribution of geological structures derived from gas venting in the Tasyo Field (Gulf of Cadiz) and the generation of BSR levels on the upper continental slope.     

Methylmercury production in sediments of Chesapeake Bay and the mid-Atlantic continental margin

Methylmercury (MeHg) concentration and production rates were studied in bottom sediments along the mainstem of Chesapeake Bay and on the adjoining continental shelf and slope. Our objectives were to 1) observe spatial and temporal changes in total mercury (HgT) and MeHg concentrations in the mid-Atlantic coastal region, 2) investigate biogeochemical factors that affect MeHg production, and 3) examine the potential of these sediments as sources of MeHg to coastal and open waters. Estuarine, shelf and slope sediments contained on average 0.5 to 1.5% Hg as MeHg (% MeHg), which increased significantly with salinity across our study site, with weak seasonal trends. Methylation rate constants (k_meth), estimated using enriched stable mercury isotope spikes to intact cores, showed a similar, but weaker, salinity trend, but strong seasonality, and was highly correlated with % MeHg. Together, these patterns suggest that some fraction of MeHg is preserved thru seasons, as found by others [Orihel, D.M., Paterson, M.J., Blanchfield, P.J., Bodaly, R.A., Gilmour, C.C., Hintelmann, H., 2008. Temporal changes in the distribution, methylation, and bioaccumulation of newly deposited mercury in an aquatic ecosystem. Environmental Pollution 154, 77] Similar to other ecosystems, methylation was most favored in sediment depth horizons where sulfate was available, but sulfide concentrations were low (between 0.1 and 10 μM). MeHg production was maximal at the sediment surface in the organic sediments of the upper and mid Bay where oxygen penetration was small, but was found at increasingly deeper depths, and across a wider vertical range, as salinity increased, where oxygen penetration was deeper. Vertical trends in MeHg production mirrored the deeper, vertically expanded redox boundary layers in these offshore sediments. The organic content of the sediments had a strong impact on the sediment:water partitioning of Hg, and therefore, on methylation rates. However, the HgT distribution coefficient (K_D) normalized to organic matter varied by more than an order of magnitude across the study area, suggesting an important role of organic matter quality in Hg sequestration. We hypothesize that the lower sulfur content organic matter of shelf and slope sediments has a lower binding capacity for Hg resulting in higher MeHg production, relative to sediments in the estuary. Substantially higher MeHg concentrations in pore water relative to the water column indicate all sites are sources of MeHg to the water column throughout the seasons studied. Calculated diffusional fluxes for MeHg averaged  1 pmol m^− 2 day^− 1. It is likely that the total MeHg flux in sediments of the lower Bay and continental margin are significantly higher than their estimated diffusive fluxes due to enhanced MeHg mobilization by biological and/or physical processes. Our flux estimates across the full salinity gradient of Chesapeake Bay and its adjacent slope and shelf strongly suggest that the flux from coastal sediments is of the same order as other sources and contributes substantially to the coastal MeHg budget.     

Dissolved aluminium and the silicon cycle in the Arctic Ocean

Concentrations of dissolved (0.2 µm filtered) aluminium (Al) have been determined for the first time in the Eurasian part of the Arctic Ocean over the entire water column during expedition ARK XXII/2 aboard R.V. Polarstern (2007). An unprecedented number of 666 samples was analysed for 44 stations along 5 ocean transects. Dissolved Al in surface layer water (SLW) was very low, close to 1 nM, with lowest SLW concentrations towards the Canadian part of the Arctic Ocean and higher values adjacent to and in the shelf seas. The low SLW concentrations indicate no or little influence from aeolian dust input. Dissolved Al showed a nutrient-type increase with depth up to 28 nM, but large differences existed between the different deep Arctic basins. The differences in concentrations of Al between water masses and basins could largely be related to the different origins of the water masses. In the SLW and intermediate water layers, Atlantic and Pacific inflows were of importance. Deep shelf convection appeared to influence the Al distribution in the deep Eurasian Basin. The Al distribution of the deep Makarov Basin provides evidence for Eurasian Basin water inflow into the deep Makarov Basin. A strong correlation between Al and Silicon (Si) was observed in all basins. This correlation and the nutrient-like profile indicate a strong biological influence on the cycling and distribution of Al. The biological influence can be direct by the incorporation of Al in biogenic silica, indirect by preferential scavenging of Al onto biogenic siliceous particles, or by a combination of both processes. From the slope of the overall Al–Si relationship in the intermediate water layer (AIDW; ~ 200–2000 m depth), an Al/Si ratio of 2.2 atoms Al per 1000 atoms Si was derived. This ratio is consistent with the range of previously reported Al/Si uptake ratio in biogenic opal frustules of diatoms. In the deepest waters (>2000 m depth) a steeper slope of the Al–Si relationship of 7.4 to 13 atoms Al per 1000 atoms Si likely results from entrainment of cold shelf water into the deep basins, carrying the signal of dissolution of terrigenous particles with a much higher Al:Si ratio of crustal abundance. Only a small enrichment with such crustal Al and Si component may readily account for the higher Al:Si slope in the deepest waters.     

Hazard assessment in rock cliffs at Central Algarve (Portugal): A tool for coastal management

Coastal hazards are in the interface of human activities with natural coastal processes. The conflicts arising from this relationship require new approaches suitable for coastal management that consider the dynamic of coastal areas. A method to assess hazard in rock cliffs is presented, combining cliff evolution forcing mechanisms along with protection factors, according to a weighted factors system. This method provides a rapid evaluation of vulnerability for cliffed areas, supporting coastal management and hazard mitigation. The method was applied to the rocky cliffs of the densely populated coastal zone between Galé and Olhos de Água (Southern Portugal), where high and very high hazard values were found to be dominant. A method validation was made using the vulnerability areas and the recorded mass movements over a 45 year period in the same area.