Correlation of the Quaternary terrace sequence in the Lower Rhine valley and northern Alpine foothills of central Europe

Thirteen glacial terraces are known from the western part of the northern Alpine foothills between the Lech and Iller Rivers. In the Lower Rhine region of West Germany, a similar number of terraces are capped by interglacial floodloams and soils. Whereas the environment during individual interglaciations did not differ substantially, the glaciations were progressively more severe. The Main Terrace system of the Rhine may be an exception. The duration of the Quaternary, starting at the base of Praetiglian, is estimated at approximately 2 million yr by paleomagnetic dating. The major cold-warm climatic cycles of the earliest Pleistocene lasted approximately 100,000 yr, the same as those of the Brunhes Chron. The intervening Main Terrace system has not yet been climatically subdivided. Correlation with the Netherlands is possible because of an abundance of paleobotanic and paleomagnetic evidence. In the Alpine foothills, stratigraphically useful indicators of warm climates are missing, but analogies in terrace development permit comparison with the Lower Rhine and Danube. The terrace sequence in the Alpine foothills is incomplete, as are those along most of the other rivers in Europe. Some of the older terraces may have been eroded.     

Vertical accuracy evaluation of freely available latest high-resolution (30 m) global digital elevation models over Cameroon (Central Africa) with GPS/leveling ground control points.

Digital Elevation Models (DEMs) contain topographic relief data that are vital for many geoscience applications. This study relies on the vertical accuracy of publicly available latest high-resolution (30?m) global DEMs over Cameroon. These models are (1) the ALOS World 3D-30?m (AW3D30), (2) the Shuttle Radar Topography Mission 1 Arc-Second C-Band Global DEM (SRTM 1) and (3) the Advanced Spaceborne Thermal Emission and Reflection Global DEM Version 2 (ASTER GDEM 2). After matching their coordinate systems and datums, the horizontal positional accuracy evaluation was carried out and it shows that geolocation errors significantly influence the vertical accuracy of global DEMs. After this, the three models are compared among them, in order to access random and systematic effects in the elevation data each of them contains. Further, heights from 555 GPS/leveling points distributed all over Cameroon are compared to each DEM, for their vertical accuracy determination. Traditional and robust statistical measures, normality test, outlier detection and removal were used to describe the vertical quality of the DEMs. The test of the normality rejected the hypothesis of normal distribution for all tested global DEMs. Overall vertical accuracies obtained for the three models after georeferencing and gross error removal in terms of Root Mean Square (RMS) and Normalized Median Absolute Deviation (NMAD) are: AW3D30 (13.06?m and 7.75?m), SRTM 1 (13.25?m and 7.41?m) and ASTER GDEM 2 (18.87?m and 13.30?m). Other accuracy measures (MED, 68.3% quantile, 95% quantile) supply some evidence of the good quality of AW3D30 over Cameroon. Further, the effect of land cover and slope on DEM vertical accuracy was also analyzed. All models have proved to be worse in the areas dominated by forests and shrubs areas. SRTM 1 and AW3D30 are more resilient to the effects of the scattering objects respectively in forests and cultivated areas. The dependency of DEMs accuracy on the terrain roughness is evident. In all slope intervals, AW3D30 is performing better than SRTM 1 and ASTER GDEM 2 over Cameroon. AW3D30 is more representative of the external topography over Cameroon in comparison with two others datasets and SRTM 1 can be a serious alternative to AW3D30 for a range of DEM applications in Cameroon.     

Elimination of Zinc from Roof Runoff through Geotextile and Clinoptilolite Filters

Direct infiltration of roof runoff into the ground may pose a potential risk of soil and groundwater contamination. The performance of two different barrier materials for the retention of zinc from roof runoff of an eleven year old zinc roof was examined in a field study. As barrier materials geotextile and clinoptilolite were applied. Automatic samplers were used to take samples both at the inlet and at the outlet of the retention facility. Samples of twenty rain events were examined. Zinc was detected in the roof runoff in concentrations of up to 25 mg/L, and lead which originates from the tin‐solder was present in concentrations of up to 84 μg/L. Under most circumstances, a first flush could be observed for the analysed substances. No retention of heavy metals was observed, where only geotextile was used as a barrier material. The clinoptilolite filter was able to adsorb up to 97 % of zinc from the roof runoff.     

Historical analysis (2000-2005) of the coastal water quality in San Andrés Island, SeaFlower Biosphere Reserve, Caribbean Colombia

To understand the coastal water quality of San Andrès Island, and provide tools for the management of its marine resources, we present the historical analysis of the island monitoring, which includes ammonia, nitrites, nitrate, phosphates, fecal and total coliforms. The anthropogenic pressure on the coastal system is heavy, with water nutrification, posing at risk seagrass and coral ecosystems. During dry season, biologically available nitrogen is 3-9 times higher than the maximum recommended for coral reefs, while during wet season values are 2-6.4 times the maximum. Biologically available phosphorous is also high, 1-8 times the maximum during dry season, 2-13 times during wet season. In some sites the concentration of pathogenic bacteria is above the limits set by law for primary and secondary contact. It is urgent to improve the management of sewage discharge, the main polluting source of San Andres coastal waters.     

On the repeatability and consistency of three-component ambient vibration array measurements

Ambient vibration measurements with small, temporary arrays that produce estimates of surface wave dispersion have become increasingly popular as a low-cost, non-invasive tool for site characterisation. An important requirement for these measurements to be meaningful, however, is the temporal consistency and repeatability of the resulting dispersion and spatial autocorrelation curve estimates. Data acquired within several European research projects (NERIES task JRA4, SESAME, and other multinational experiments) offer the chance to investigate the variability of the derived data products. The dataset analysed here consists of repeated array measurements, with several years of time elapsed between them. The measurements were conducted by different groups in different seasons, using different instrumentations and array layouts, at six sites in Greece and Italy. Ambient vibration amplitude spectra and locations of dominant sources vary between the two measurements at each location. Still, analysis indicates that this does not influence the derived dispersion information, which is stable in time and neither influenced by the instrumentation nor the analyst. The frequency range over which the dispersion curves and spatial autocorrelation curves can be reliably estimated depends on the array dimensions (minimum and maximum aperture) used in the specific deployment, though, and may accordingly vary between the repeated experiments. The relative contribution of Rayleigh and Love waves to the wavefield can likewise change between repeated measurements. The observed relative contribution of Rayleigh waves is generally at or below 50%, with especially low values for the rural sites. Besides, the visibility of higher modes depends on the noise wavefield conditions. The similarity of the dispersion and autocorrelation curves measured at each site indicates that the curves are stable, mainly determined by the sub-surface structure, and can thus be used to derive velocity information with depth. Differences between velocity models for the same site derived from independently determined dispersion and autocorrelation curves—as observed in other studies—are consequently not adequately explained by uncertainties in the measurement part.     

Safeguarding the future marine environment of Europe

The priorities for the protection of the seas have been discussed extensively. Many consider that the problem of marine pollution can only be solved on the basis of joint international actions. This is particularly true for the various countries bordering on the North Sea. To implement such ‘Joint Actions’, a new understanding of safety, namely ‘global maritime safety’ should be discussed with all those involved.     

Implementing Europe's climate targets at the regional level

Having agreed upon a binding emissions reduction path by 2020, the EU plays a leading role in international climate policy. The EU currently pursues a dual approach through an Emissions Trading Scheme (ETS) at the EU level and also via national targets in sectors not covered by the ETS. The latter include the buildings sector, transportation, agriculture, and waste. Emissions from these sectors are mainly subject to policies at provincial and local levels. A method is presented for elaborating and implementing a long-term climate policy process up to 2030 for the regional (provincial) level. Building on regional GHG inventory data, a set of indicators for each sector is developed in order to arrive at a target path consistent with the deduced regional GHG reduction requirement. Policy measures and their implementation are then settled subsequent to this process. Quantitative regional targets are found to be a prerequisite for the formation of regional climate policy as they increase participant responsibility and commitment. A five-step process of stakeholder participation ensures effective implementation of regional climate action plans. Insights from an exemplary European region are drawn upon, and policy issues are discussed in both quantitative and institutional terms.     

Monitoring Forest Fire Danger with Remote Sensing

Our paper presents a review of the use of remote sensing technologies for forest wildfire danger monitoring, with a particular emphasis on its applicability to fuel moisture monitoring. Remote sensing of fuel moisture was first done with NOAA-AVHRR NDVI images, but NDVI is more related to vegetation greenness rather than water stress. NOAA-AVHRR surface temperature images were also used, alone or in association with NDVI images. Both kinds of images have a limited image availability due to cloud cover. This is not the case for radar images, but their use in fuel moisture monitoring is still experimental, because of the noisy effects of several factors. Finally, the paper discusses the operational potentials and limitations of the use of each kind of satellite data for fire danger monitoring.     

Spatial interpretation of high-resolution environmental proxy data of the Middle Pleistocene Palaeolithic faunal kill site Schöningen 13 II-4, Germany

To spatially characterize the palaeolakeshore environment at the archaeological kill site Schöningen 13 II-4 of the Middle Pleistocene Reinsdorf sequence, in-depth palynological, geochemical, aquatic microfossil and archaeological analyses were undertaken on sediment sections with an average thickness of about 15 cm, concordantly overlain by faunal remains, dominated by horse, from the unique ‘Spear Horizon’ layers of the 1995 excavation campaign. The data reveal a distinctive lake level drop, documented by the change from a carbonate-rich lake marl to a carbonate-free organic mud with increased carbon content and decreasing C/N, Si/Al, Si/K and Fe/Al ratios, indicating a higher pedogenic supply of organic matter and drier conditions at the site. Compared with older, similar transitional phases of lake level changes occurring within the Reinsdorf sequence, it is important that these youngest sediments are undisturbed, indicating continuous development. Ostracod and diatom analyses indicate a lowering water level with higher salinities and rich aquatic vegetation. Mesorheophilic ostracod species along with tychoplanktic diatom taxa point to flowing waters and turbulence at the lakeshore, presumably related to spring-fed streams originating from nearby highlands. Palynological results reveal a very diverse zonal vegetation pattern around the palaeolakeshore considering an area of investigation of approximately 50 × 75 m and a tessellated type of regional vegetation during the formation of the archaeological horizons. On topographically lower elevated areas, birch groves and taxa favouring wet, marshy conditions such as Cyperaceae, indicative of terrestrialization, were predominating, while other stands of this transitional phase reveal a very dry, grass-dominated steppe woodland favouring a rich wildlife with a striking number of megaherbivores. Our results suggest that the lithological differences of the ‘Spear Horizon’ layers containing the archaeological finds were due to their respective topographical situation and that the layers were deposited almost simultaneously during the beginning of the lake level drop. Human activities seem to have concentrated in sparsely vegetated areas along the palaeolakeshore, rather than in areas of adjacent denser birch swamp forest stands.     

The Preparation and Preliminary Characterisation of Three Synthetic Andesite Reference Glass Materials (ARM‐1, ARM‐2, ARM‐3) for In Situ Microanalysis

Three synthetic reference glasses were prepared by directly fusing and stirring 3.8 kg of high‐purity oxide powders to provide reference materials for microanalytical work. These glasses have andesitic major compositions and are doped with fifty‐four trace elements in nearly identical abundance (500, 50, 5 µg g^?1) using oxide powders or element solutions, and are named ARM‐1, 2 and 3, respectively. We further document that sector‐field (SF) ICP‐MS (Element 2 or Element XR) is capable of sweeping seventy‐seven isotopes (from ⁷Li to ²³⁸U, a total of sixty‐eight elements) in 1 s and, thus, is able to quantify up to sixty‐eight elements by laser sampling. Micro‐ and bulk analyses indicate that the glasses are homogeneous with respect to major and trace elements. This paper provides preliminary data for the ARM glasses using a variety of analytical techniques (EPMA, XRF, ICP‐OES, ICP‐MS, LA‐Q‐ICP‐MS and LA‐SF‐ICP‐MS) performed in ten laboratories. Discrepancies in the data of V, Cr, Ni and Tl exist, mainly caused by analytical limitations. Preliminary reference and information values for fifty‐six elements were calculated with uncertainties [2 relative standard error (RSE)] estimated in the range of 1–20%.