Tracing leachates at waste sites using geophysical and geochemical modelling

Tracing leachates at landfills is usually carried out using either geophysical methods or chemical analyses of groundwater. There are often problems with fingerprinting pollution sources or clarifying the spreading pattern due to a wide variety of possibilities giving similar anomalies. The aims of the project were to evaluate the advantages of combining results from multigeophysical modelling and statistical/chemical modelling in order to identify pollution sources and the spreading pattern and to test a new technique for chemical fingerprinting. The project was carried out at a landfill in central Sweden using geophysical measurements and modelling of CVES, GPR and VLF as well as chemical modelling using M3 (multivariate mixing and mass balance calculations). The results indicate that by combining geophysical modelling and chemical calculations, the possibilities of fingerprinting the origin of pollution as well as delineating the spreading pattern are significantly increased.     

Assessment of Marine Clay Improvement Under Reclamation Fills by in-situ Testing Methods

In ground improvement projects with prefabricated vertical drains, the duration of the preloading period is set in advance based on the predetermined time rate of consolidation of the compressible layer. If prediction is accurately done, the required degree of consolidation is met at the pre-determined preloading time. As such, there is a requirement for in-situ tests to be carried out just prior to the removal of surcharge to assess the degree of consolidation of the improved ground. In-situ tests were carried out after 23 months of surcharge loading at the In-Situ Test Site within the Changi East Reclamation Project in the Republic of Singapore. In-situ testing works in this research study comprises the use of field vane shear, piezocone, flat dilatometer and self-boring pressuremeter. The in-situ tests were carried out to determine the shear strength and degree of consolidation of the Singapore marine clay at Changi after 23 months of surcharge loading. The In-Situ Test Site consisted of a Vertical Drain Area as well as an untreated Control Area. Both areas were located adjacent to each other and were surcharged simultaneously to the same level and surcharge left in place for a period of 23 months. Comparison was made between the in-situ test results of the Vertical Drain Area and the untreated Control Area.     

紫色丘陵区不同侵蚀沉积地段土壤结构特征

以中国科学院盐亭紫色土农业生态试验站小流域为例，研究不同土壤侵蚀沉积地段（斜坡和沟谷不同部位）的土壤结构特征，以了解侵蚀沉积对土壤结构的影响。结果表明，在植被覆盖较好的坡体顶部，土壤侵蚀较弱，团聚度达到30．1％，MWD变化为3．4mm，土壤结构良好；沟谷底部由于沉积而有较多细土物质并具有适宜的水分条件，有利于土壤团聚体的形成，结构状况亦较好，团聚度达到50．3％，结构保持率为35．4％；而坡腰侵蚀较严重，团聚度仅为13．6％，结构保持率为14．1％，土壤结构状况较差。     

论琅岐岛经济发展定位与开发建设

随着福州东扩南移的城市发展策略的推行,琅岐岛凭借独特的资源优势,经济地理位置日显重要,对其开发建设已成为大势所趋。本文在分析了琅岐岛区域经济发展的资源条件基础上,指出琅岐经济发展的合理定位,提出区域经济发展的若干对策,为琅岐经济持续、健康、稳定地发展提供意见。     

小型水电站建设用地地质灾害评估技术研究——以湄尼多河小型水电站为例

现阶段,地质灾害评估技术人员在评估实践中,往往不注重各评估对象的差异性,采取同一评估模式,结果达不到评估的目的。在对小型水电站进行评估时,野外调查的重点,评估过程中所使用的方法以及危险性现状、预测及综合分区评估等与大型水电站、路线工程、矿山开采、民用建筑等工程有所不同。湄尼多河小型水电站工程位于云南省怒江州福贡县马吉乡境内,地质环境条件复杂,评估级别综合为二级。文章以该电站建设用地地质灾害危险性评估为例,对小型水电站建设用地地质灾害危险性评估的方法与理论进行探讨。     

土地利用更新调查需要注意的几个问题

以土地利用更新调查生产中的体会．从工作前期准备、技术路线、正射影像图制作、权属界线调查几种特殊情况和表示方法的处理，提出了土地利用更新调查需要注意的几个问题和建议。     

地震属性分析中水平切片的应用

利用地震数据体中含有的丰富地质信息,可以有效地进行储层预测。层拉平水平切片地层学解释方法是先将地震剖面目的层段做层拉平处理,然后对切片顺地层层面追踪,勾绘出各种地层现象,并以地层学的观点加以解释。该方法在吉林探区扶新南部地区的应用中,对于识别河道的展布趋势取得了较好的效果,而且发现了多期叠置的扇型沉积体。另外,还可指导反演数据体的解释,做到对岩性体从定性到定量的描述。     

激光剥蚀等离子体质谱分析中激光剥蚀参数对信号响应的影响

探讨了激光剥蚀等离子体质谱固体微区分析中激光剥蚀参数对元素分析信号灵敏度及稳定性的影响。这些参数包括激光功率、脉冲频率、剥蚀孔经、散焦距离、剥蚀方式等。讨论了优化的激光剥蚀等离子体质谱信号采集及数据处理方式。在全质量范围内选用具有代表性的元素作为研究对象,建立了激光剥蚀的一般性特征规律和266nm紫外激光系统的最佳操作条件。在选定的激光剥蚀参数下,大多数被测元素的检出限为22.8~457ng/g,能够满足固体微区分析的要求。     

美国坦帕湾地区供水策略介析

世界范围内的水资源和水环境问题越来越突出。首先系统介绍了美国弗罗里达州坦帕湾地区的水资源利用现状和供水管理策略,对该地区的地表水、地下水、海水淡化和废水利用的情况作了详细分析。该地区从以地下水为主的供水方式,改变为地表水、地下水、海水淡化各占1/3的供水方式的规划思想、经济分析以及管理措施具有积极的参考意义。针对我国的客观背景,进一步探讨了城市供水的挖潜途径,雨水直接回收和中水利用是城市节水的两个有效方式,沿海地区则应对海水淡化予以重视;对于广大的农村乡镇,雨水集水塘和小型平原水库则是提高农村供水条件和改善水环境的一种有效措施。     

前方交会及光电高程导线在桥梁圆形立柱监理中的应用

根据对前方交会及光电高程导线的精度分析,对用前方交会及光电高程导线复核圆形立柱进行了探讨,并给出了工程实例验证.