Ocean coast effect on magnetotelluric data: a case study from Kachchh, India

The effects of the ocean coast on magnetotelluric (MT) data have been studied and results are described in this article. MT soundings from various sites along coastal plains of Kachchh were acquired where volcanic rocks overlie Mesozoic sediments having potential resource prospects. The region of our study lies in the proximity of Gulf of Kachchh and Arabian Sea. This article describes the effects the presence of a conductive body on the acquired MT data. With the help of synthetic MT modelling and induction arrows we demonstrate the influence of shallow conductive body on the MT data. The modelling results when compared to the field observations show that much of the high frequencies are unaffected by the coast, however low frequencies of the data do seem to be distorted by onshore–offshore resistivity contrasts. The least affect on high frequencies can be attributed to very shallow water depth as well as to the fact that the onshore–offshore resistivity contrasts are not large enough to influence the high frequency data badly. The results presented here report for the first time the effect of the coast on the analysis on MT data from Kachchh. Due to several academic as well as industrial onshore–offshore MT experiments presently being carried out to explore its hydrocarbon potential, our results have an important bearing on designing and acquisition of future MT surveys in this region.     

Response and capacity of monopod caisson foundation under eccentric lateral loads

Monopod caisson foundation is a viable alternative for supporting offshore wind turbines located at shallow water depths. This foundation system has to resist overturning moment generated due to resultant lateral load, arising from wind and water wave action, that can act at any loading height above the seabed. This paper presents results of a numerical investigation performed to determine the influence of loading height, caisson geometry and superstructure load on the ultimate lateral capacity, initial stiffness, and soil failure zone of the foundation, when installed in very dense sand. Both the ultimate and serviceable states of the caisson foundation obtained from the analyses are represented in terms of envelopes plotted between lateral load and overturning moment. Simplified expressions, which take into account the influence of caisson geometry, loading height, and soil properties, are also presented to serve as a preliminary base for design of the monopod caisson foundation.     

Mid-term periodicities and heliospheric modulation of coronal index and solar flare index during solar cycles 22–23

We applied fast Fourier transform techniques and Morlet wavelet transform on the time series data of coronal index, solar flare index, and galactic cosmic ray, for the period 1986–2008, in order to investigate the long- and mid-term periodicities including the Rieger (\({\sim }130\) to \({\sim }190\) days), quasi-period (\({\sim }200\) to \({\sim }374\) days), and quasi-biennial periodicities (\({\sim }1.20\) to \({\sim }3.27\) years) during the combined solar cycles 22–23. We emphasize the fact that a lesser number of periodicities are found in the range of low frequencies, while the higher frequencies show a greater number of periodicities. The rotation rates at the base of convection zone have periods for coronal index of \({\sim }1.43\) years and for solar flare index of \({\sim }1.41\) year, and galactic cosmic ray, \({\sim }1.35\) year, during combined solar cycles 22–23. In relation to these two solar parameters (coronal index and solar flare index), for the solar cycles 22–23, we found that galactic cosmic ray modulation at mid cut-off rigidity (\(\hbox {Rc} = 2.43\hbox {GV}\)) is anti-correlated with time-lag of few months.     

FLRW cosmological models with quark and strange quark matters in $$ gravity

In this paper, we have studied the magnetized quark matter (QM) and strange quark matter (SQM) distributions in the presence of \(f(R,T)\) gravity in the background of Friedmann-Lemaître-Robertson-Walker (FLRW) metric. To get exact solutions of modified field equations we have used \(f(R,T ) = R + 2 f(T)\) model given by Harko et al. with two different parametrization of geometrical parameters i.e. the parametrization of the deceleration parameter \(q \), and the scale factor \(a \) in hybrid expansion form. Also, we have obtained Einstein Static Universe (ESU) solutions for QM and SQM distributions in \(f(R,T)\) gravity and General Relativity (GR). All models in \(f(R,T)\) gravity and GR for FRW and ESU Universes with QM also SQM distributions, we get zero magnetic field. These results agree with the solutions of Akta? and Aygün in \(f(R,T)\) gravity. However, we have also discussed the physical consequences of our obtained models.     

Early In-orbit Performance of Scanning Sky Monitor Onboard AstroSat

We report the in-orbit performance of Scanning Sky Monitor (SSM) onboard AstroSat. The SSM operates in the energy range 2.5 to 10 keV and scans the sky to detect and locate transient X-ray sources. This information of any interesting phenomenon in the X-ray sky as observed by SSM is provided to the astronomical community for follow-up observations. Following the launch of AstroSat on 28th September, 2015, SSM was commissioned on October 12th, 2015. The first power ON of the instrument was with the standard X-ray source, Crab in the field-of-view. The first orbit data revealed the basic expected performance of one of the detectors of SSM, SSM1. Following this in the subsequent orbits, the other detectors were also powered ON to find them perform in good health. Quick checks of the data from the first few orbits revealed that the instrument performed with the expected angular resolution of 12’ \(\times \) 2.5\(^\circ \) and effective area in the energy range of interest. This paper discusses the instrument aspects along with few on-board results immediately after power ON.     

Evaluation of a probabilistic approach to simulation of alkalinity and electrical conductivity at a river bank filtration site

In river bank filtration, impurities present in the river water travel with the bank filtrate towards the pumping well. During this passage, certain types of impurities, such as turbidity, total coliform, and so forth, may get attenuated; however, it is interesting to note that some of the instant raw river water quality parameters, such as alkalinity and electrical conductivity, increase after the passage of water through the porous medium. This occurs because water, when passing through the soil pores, absorbs many of the solutes that cause an increase in alkalinity and electrical conductivity. Measurements at a river bank filtration site for a year showed that alkalinity of 116–32 mg l^?1 in river water increased to 222.4–159.9 mg l^?1 in the river bank filtered water. Likewise, the electrical conductivity increased from 280–131 μS cm^?1 to 462–409.6 μS cm^?1. This study uses a probabilistic approach for investigating the variation of alkalinity and electrical conductivity of source water that varies with the natural logarithm of the concentration of influent water. The probabilistic approach has the potential of being used in simulating the variation of alkalinity and electrical conductivity in river bank filtrate. Copyright © 2011 John Wiley & Sons, Ltd.     

Abrupt behaviours of streamflow and sediment load variations of the Yangtze River basin,China

Monthly sediment load and streamflow series spanning 1963–2004 from four hydrological stations situation in the main stem of the Yangtze River, China, are analysed using scanning t‐test and the simple two‐phase linear regression scheme. Results indicate significant changes in the sediment load and streamflow from the upper reach to the lower reach of the Yangtze River. Relatively consistent positive coherency relations can be detected between streamflow and sediment load in the upper reach and negative coherency in the middle and lower reaches. Interestingly, negative coherency is found mainly for larger time scales. Changes in sediment load are the result mainly of human influence; specifically, the construction of water reservoirs may be the major cause of negative coherency. Accentuating the human influence from the upper to the lower reach results in inconsistent correlations between sediment load and streamflow. Decreasing sediment load being observed in recent years has the potential to alter the topographical properties of the river channel and the consequent development and recession of the Yangtze Delta. Results of this study are of practical significance for river channel management and evaluation of the influence of human activities on the hydrological regimes of large rivers. Copyright © 2012 John Wiley & Sons, Ltd.     

Fluoride enrichment in aquifers of the Thar Desert: controlling factors and its geochemical modelling

The groundwater is the only source of drinking water in the Jaisalmer district of Rajasthan, India. The study area is a part of the Thar Desert. It has low and scattered population and no industries; hence, the possibility of anthropogenic input of fluoride is almost negligible. Thus, the enrichment of fluoride is only possible due to geochemical processes taking place in the groundwater of the region. A total of 100 groundwater samples, 34 samples from Jaisalmer and 66 samples from the Pokharan administrative blocks, were collected. It was observed that the concentration of fluoride ranged from 0.08 mg/l to 4.56 mg/l in the groundwater of Jaisalmer and from 0.56 mg/l to 6.60 mg/l in the samples of the Pokharan block. The alkaline condition (average pH, 7.7 ± 0.22 and 8.01 ± 0.25 in Jaisalmer and the Pokharan administrative block, respectively) in the region favours fluorite dissolution. Ion exchange, dissolution of calcite, semi‐arid climate, alkaline conditions and weathering are responsible for fluoride enrichment in the groundwater of the study area. Copyright © 2012 John Wiley & Sons, Ltd.     

The influence of dam and lakes on the Yangtze River streamflow: long‐range correlation and complexity analyses

Employing long‐range correlation, complexity features and clustering, this study investigated the influence of dam and lake‐river systems on the Yangtze River flow. The impact of the Gezhouba Dam and the lake systems on streamflow was evaluated by analysing daily streamflow records at the Cuntan, the Yichang and the Datong station. Results indicated no evident influence of the Gezhouba Dam on streamflow changes. Distinct differences in scaling behaviour, long‐range correlation and clustering of streamflow at the Datong station when compared with those at the Cuntan and Yichang stations undoubtedly showed the influence of water storage and the buffering effect of the lake systems between the Datong station and other two hydrological stations on streamflow in the lower Yangtze River basin. Decreased regularity, enhanced long‐range correlation and increased clustering of streamflow in the lower Yangtze River basin due to the effect of water storage of the lake systems were corroborated. Copyright © 2011 John Wiley & Sons, Ltd.     

Breach erosion of earthfill dams (BEED) model

A computer model has been developed for simulation of breach erosion of earthfill dams (BEED). The model incorporates the processes of surface erosion and slope sloughing to simulate breach enlargement. Depletion of reservoir water is approximated by a volume continuity equation while broad-crested weir hydraulics is utilized to describe flow over and through the breach. Due to the implicit form of these equations, an iterative solution is proposed with convergence achieved within only a few iterations. The BEED model is written in both FORTRAN 77 and BASIC computer languages. Testing of the model using historical data of the failures of Teton and Huaccoto dams showed that timing, shape, and magnitude of the predicted outflow hydrograph were adequately simulated by this model. The same is true for the dimensions of the terminal breach. A sensitivity analysis indicated that internal friction angle and the relation for surface erosion were the major factors affecting the model results.