Environmental tracers and indicators bringing together groundwater,surface water and groundwater-dependent ecosystems: importance of scale in choosing relevant tools

Groundwater–surface water (GW–SW) interactions cover a broad range of hydrogeological and biological processes and are controlled by natural and anthropogenic factors at various spatio-temporal scales, from watershed to hyporheic/hypolentic zone. Understanding these processes is vital in the protection of groundwater-dependent ecosystems increasingly required in water resources legislation across the world. The use of environmental tracers and indicators that are relevant simultaneously for groundwater, surface water and biocenoses–biotope interactions constitutes a powerful tool to succeed in the management task. However, tracer type must be chosen according to the scale of interest and tracer use thus requires a good conceptual understanding of the processes to be evaluated. This paper reviews various GW–SW interaction processes and their drivers and, based on available knowledge, systemises application of conservative tracers and semi-conservative and reactive environmental indicators at different spatial scales. Biocenoses–biotopes relationships are viewed as a possible transition tool between scales. Relation between principal application of the environmental tracers and indicators, examples and guidelines are further proposed for examining GW–SW interactions from a hydrogeological and biological point of view by demonstrating the usability of the tracers/indicators and providing recommendations for the scientific community and decision makers.     

Investigation of the effect of specific interfacial area on strength of unsaturated granular materials by X-ray tomography

This paper studies the effect of interfacial areas (air–water interfaces and solid–water interfaces) on material strength of unsaturated granular materials. High-resolution X-ray computed tomography technique is employed to measure the interfacial areas in wet glass bead samples. The scanned 3D images are trinarized into three phases and meshed into representative volume elements (RVEs). An appropriate RVE size is selected to represent adequate local information. Due to the local heterogeneity of the material, the discretized RVEs of the scanned samples actually cover a very large range of degree of saturation and porosity. The data of RVEs present the relationship between the specific interfacial areas and degree of saturation and gives boundaries where the interfacial area of a whole sample should fall in. In parallel, suction-controlled direct shear tests have been carried out on glass beads and the material strength has been corroborated with two effective stress definitions related to the specific air–water interfacial areas and fraction of wetted solid surface, respectively. The comparisons show that the specific air–water interfacial area reaches the peak at about 25% of saturation and contributes significantly to the material strength (up to 60% of the total capillary strength). The wetted solid surface obtained from X-ray CT is also used to estimate Bishop’s coefficient χ based on the second type of effective stress definition, which shows a good agreement with the measured value. This work emphasizes the importance to include interface terms in effective stress formulations of unsaturated soils. It also suggests that the X-ray CT technique and RVE-based multiscale analysis are very valuable in the studies of multiphase geomaterials.

     

Marine-derived C calibration and activity record for the past 50,000 years updated from the Cariaco Basin

An expanded Cariaco Basin ¹⁴C chronology is tied to ²³⁰Th-dated Hulu Cave speleothem records in order to provide detailed marine-based ¹⁴C calibration for the past 50,000 years. The revised, high-resolution Cariaco ¹⁴C calibration record agrees well with data from ²³⁰Th-dated fossil corals back to 33 ka, with continued agreement despite increased scatter back to 50 ka, suggesting that the record provides accurate calibration back to the limits of radiocarbon dating. The calibration data document highly elevated Δ¹⁴C during the Glacial period. Carbon cycle box model simulations show that the majority of observed Δ¹⁴C change can be explained by increased ¹⁴C production. However, from 45 to 15 ka, Δ¹⁴C remains anomalously high, indicating that the distribution of radiocarbon between surface and deep ocean reservoirs was different than it is today. Additional observations of the magnitude, spatial extent and timing of deep ocean Δ¹⁴C shifts are critical for a complete understanding of observed Glacial Δ¹⁴C variability.     

An iron-rich deposit from the Northeast Pacific

An iron-rich deposit dredged from the upper flank of Dellwood Seamount in the Northeast Pacific has been analyzed for major and trace elements, rare-earth contents and uranium isotopic composition. In terms of mineralogy and overall chemical composition, the deposit resembles other iron-rich deposits variously attributed to volcanic hydrothermal activity. Both the relative concentrations of the rare-earth elements and the isotopic composition of uranium rule out seawater as the sole source of elements in this deposit. The rare-earth element pattern indicates that these elements were derived from the underlying basalt. The²³⁴U/²³⁸U ratio is significantly higher than in seawater and can best be explained by preferential leaching of²³⁴U generated by decay from its parent²³⁸U in the underlying rock and subsequent redeposition of the excess²³⁴U together with the Fe and minor metals. These data are consistent with a model for the origin of submarine metal-rich solutions involving mobilization of elements from the interior of slowly cooling basalts by circulating seawater.     

Large wood budget and transport dynamics on a large river using radio telemetry

Despite the abundance of large wood (LW) river studies there is still a lack of understanding of LW transport dynamics on large low gradient rivers. This study used 290 radio frequency identification tagged (RFID) LW and 54 metal (aluminum) tagged LW, to quantify the percent of in‐channel LW that moves per year and what variables play a role in LW transport dynamics. Aluminum tags were installed and monitored on LW in‐transit during the rising limb of a flood, the mean distance traveled by those pieces during the week was 13.3 river kilometers (km) with a maximum distance of 72 km. RFID tagged LW moved a mean of 11.9 km/yr with a maximum observed at 101.1 km/yr. Approximately 41% of LW low on the bank moves per year. The high rate of transport and distance traveled is likely due to the lack of interaction between LW floating in the channel and the channel boundaries, caused primarily by the width of the channel relative to length of the LW. Approximately 80% of the RFID tags moved past a fixed reader during the highest 20% of river stage per year. LW transport and logjam dynamics are complicated at high flows as pieces form temporary jams that continually expand and contract. Unlike most other studies, key members that create a logjam were defined more by stability than jam size or channel/hydrologic conditions. Finally, using an existing geomorphic database for the river, and data from this study, we were able to develop a comprehensive LW budget showing that 5% of the in‐channel LW population turns over each year (input from mass wasting and fluvial erosion equals burial, decomposition, and export out of system) and another 16% of the population moving within the system. Published 2013. This article is a U.S. Government work and is in the public domain in the USA.     

Report on the 4th International Meeting of the IUGS Lower Cretaceous Ammonite Working Group, the “Kilian Group” (Dijon, France, 30th August 2010)

The 4th Kilian Group meeting (Dijon, France, 30th August 2010) focused on the Aptian and Albian Stages. For the Aptian, a two-fold division of the stage was adopted for the Mediterranean area with a boundary between the Dufrenoyia furcata and Epicheloniceras martini Zones. The main changes to the zonal scheme concern the Lower Aptian with: the introduction of a Deshayesites luppovi Subzone in the upper part of the Deshayesites oglanlensis Zone; the replacement of Deshayesites weissi by Deshayesites forbesi as new index-species of the second interval zone; the introduction of a Roloboceras hambrovi Subzone in the upper part of the D. forbesi Zone; and the subdivision of the D. furcata Zone into the D. furcata and Dufrenoyia dufrenoyi Subzones. For the Albian, the upper part of the Douvilleiceras mammillatum Zone (Lower Albian) is now characterized by a Lyelliceras pseudolyelli Subzone. The main amendments concern the Upper Albian. The base of this substage is defined by the base of the Dipoloceras cristatum Zone. Above it, the Upper Albian zonal scheme comprises in stratigraphic order the Mortoniceras pricei, Mortoniceras inflatum, Mortoniceras fallax, Mortoniceras rostratum, Mortoniceras perinflatum and Arrhaphoceras briacensis Zones.     

Massive sulfides in a sedimented rift valley, northern Juan de Fuca Ridge

A number of mounds each several hundred meters across and up to sixty meters high have been observed with SeaMARC II acoustic imagery and Seabeam bathymetry in the sediment-filled axial valley at the northern end of the Juan de Fuca Ridge. The mounds are located a few kilometers west of the eastern valley-bounding normal fault scarp where the local sediment fill is approximately 300 m thick. All of the mounds are believed to be of hydrothermal origin, and one is associated with anomalously high heat flow in excess of 1 W m⁻². A piston core collected from that mound comprises coarse clastic sulfide units interbedded with sulfidic muds. Hydrothermal minerals present in the 2.3 m section include pyrrhotite, pyrite, marcasite, sphalerite, chalcopyrite, iss (intermediate solid solution in the CuFeZnS system), chalcopyrrhotite, galena, talc, barite, and amorphous silica. Mineral fabrics of the clasts indicate that the material was precipitated at or near the sea floor by mixing of hot hydrothermal fluids with cold seawater. Low concentrations of Zn, Cu, Cd, and Ag relative to those found in unsedimented ridge hydrothermal deposits, and the presence of pyrrhotite as an early phase mineral indicates that the vent fluids have been modified by reaction with sediments beneath the mound. Rapid sedimentation in a rift valley is clearly conducive to the formation of large hydrothermal mineral deposits like those believed to be present within and beneath these mounds. The relatively impermeable sediment cover insulates the crust, inhibits groundwater recharge, promotes long-lived discharge at a restricted number of sites, provides a substrate for the efficient subsurface precipitation of minerals, and through continued sedimentation, protects surficial deposits from the corrosive effects of seawater. No reliable estimate of the bulk composition of the mounds can be made with existing data, but their size is comparable to major hydrothermal mineral deposits found on land; ancient settings in which many land deposits formed are in many ways similar to the one in which the features described here are currently forming.     

Towards a microzonation of the Greater Beirut area: an instrumental approach combining earthquake and ambient vibration recordings

Lebanon is situated on the 1000 km long Levant transform fault that separates the Arabic from the African tectonic plates. In Lebanon, the Levant fault splits up into a set of ramifications that had, in the past, generated major destructive earthquakes causing a lot of destruction and thousands of casualties. The most devastating one was the 551 A.D. offshore earthquake that destroyed Beirut, the capital of Lebanon. This paper presents a site effect study in Beirut, aimed at proposing a framework for future microzonation works in the city. It includes two complementary parts. A 6-month, temporary seismological experiment was first conducted to estimate the site response at 10 sites sampling the main geological units of Beirut on the basis of local and regional earthquake recordings. This spatially sparse information was then complemented by a large number (615) of microtremor measurements covering the Beirut municipality and part of its suburbs with a 400 m dense grid. The recordings were analysed with the standard site-to-reference and horizontal-to-vertical spectral ratio methods for earthquake recordings, and the horizontal-to-vertical ratio for ambient noise recordings. Significant ground motion amplification effects (up to a factor of 8) are found in a few areas corresponding to recent deposits. The consistency between results from earthquake and microtremor recordings allows proposing a map of the resonance frequencies within the city and its suburbs, with frequencies ranging from 0.5 to 5 Hz for the deepest deposits, and 5–10 Hz for shallow areas. Finally, the results are discussed and a way to combine the results obtained from the temporary stations to the great number of recordings coming from the permanent Lebanese network is proposed.     

Identifying the origin of groundwater and flow processes in complex landslides affecting black marls: insights from a hydrochemical survey

The Super‐Sauze mudslide is a persistently active slow‐moving landslide occurring in the black marl outcrops of the French South Alps. It has been intensively studied since the early 1990s. Geotechnical, geomorphological, geophysical and hydrological investigations have led to a better understanding of the processes governing the landslide motion. Water ?ows inside the system have been proven to have a major impact. To look closer at the processes involved and especially to gain a better idea of the origin and pathways of the waters, a hydrochemical study was carried out from May 2003 to May 2004. The groundwater was sampled during ?ve ?eld campaigns spread uniformly over the year. Groundwater from a network of boreholes was collected as well as spring waters from the fractured bedrock (in situ black marl) and from the moraine aquifer above the landslide. Results showed that the groundwater chemistry could not be fully explained by rainfall recharge or simple water–matrix equilibrium. A contribution of saline waters coming from the bottom of a thrust sheet overhanging the landslide was required to get the observed high mineralization. On a ?ow line, the hydrochemical evolution was related to both soil–matrix equilibrium and deep water sources coming up to the surface by means of major faults, the bedding planes and the schistosity. Hydrochemical anomalies made it possible to point out such contributions locally. It was shown that water chemistry and landslide activity were closely related. This hydrochemical investigation also enabled us to better de?ne the hydrosystem limits.Copyright © 2006 John Wiley & Sons, Ltd.     

Future projections of winter rainfall in southeast Australia using a statistical downscaling technique

Much of southeast Australia has experienced rainfall substantially below the long-term average since 1997. This protracted drought is particularly noticeable in those parts of South Australia and Victoria which experience a winter (May through October) rainfall peak. For the most part, the recent meteorological drought has affected the first half of the rainfall season May–June–July (MJJ), while rainfall during the second half August–September–October (ASO) has been much closer to the long term average. The recent multi-year drought is without precedent in the instrumental record, and is qualitatively similar to the abrupt decline in rainfall which was observed in the southwest of Western Australia in the 1960 and 1970s. Using a statistical downscaling technique, the rainfall decline is linked to observed changes in large-scale atmospheric fields (mean sea level pressure and precipitable water). This technique is able to reproduce the statistical properties of rainfall in southeast Australia, including the interannual variability and longer time-scale changes. This has revealed that the rainfall recent decline may be explained by a shift to higher pressures and lower atmospheric precipitable water in the region. To explore the likely future evolution of rainfall in southeast Australia under human induced climate change, the same statistical downscaling technique is applied to five climate models forced with increasing greenhouse gas concentrations. This reveals that average rainfall in the region is likely to decline in the future as greenhouse gas concentrations increase, with the greatest decline occurring during the first half of winter. Projected declines vary amongst models but are generally smaller than the recent early winter rainfall deficits. In contrast, the rainfall decline in late winter–spring is larger in future projections than the recent rainfall deficits have been. We illustrate the consequences of the observed and projected rainfall declines on water supply to the major city of Melbourne, using a simple rainfall run-off relationship. This suggests that the water resources may be dramatically affected by future climate change, with percentage reductions approximately twice as large as corresponding changes in rainfall.