Late Holocene marine productivity changes in Northern Patagonia-Chile inferred from a multi-proxy analysis of Jacaf channel sediments

A multi-proxy approach based on organic (organic carbon, alkenones, and C/N) and inorganic geochemical proxies (biogenic opal, inorganic carbon, Fe, Ti, and Ca) preserved in the sediments of the Jacaf channel (CF7-PC33; 44°21′S, 72°58′W, 510 m water depth), Chilean fjords, yields evidence of major past productivity fluctuations in accordance with climatic changes over the last ∼1800 years. The downcore record clearly shows two productivity/climate modes. The first period, prior to 900 cal yr BP, is characterized by decreased marine productivity and a reduced continental signal, pointing to diminished precipitation and runoff. In contrast, the second period between ∼750 cal yr BP and the late 1800s (top of core) is illustrated by elevated productivity and an increased continental signal, suggesting higher precipitation and runoff. Both time intervals are separated by a relatively abrupt transition of ∼150 years which roughly coincides with the beginning of the Little Ice Age. The increased content of freshwater diatoms and Chrysophyte cysts that characterize the last 200 years of the latter mode coincides with a significant decrease in the carbonate content of the sediment; together they further indicate increased terrigenous contributions and decreased marine carbonate productivity at the end of the Little Ice Age. The correspondence between our record and other paleoclimate studies carried out in South America and Antarctica demonstrates that the Chilean fjord area of Northern Patagonia is not just sensitive to local climatic variability but also to regional and possibly global variability.     

Evolution des hydrocarbures dans des sédiments côtiers méditerranéens prélevés à proximité d'un emissaire d'une raffinerie de pétrole

Coastal Mediterranean sediments highly polluted by refinery effluents have been studied for their hydrocarbon content and bacterial activity. The study has taken into account both the distance from the refinery and depth of sampling. Very high hydrocarbon concentrations have been found (1–250 g/kg dry sediment). Micro-organisms in the sediments have a high bacterial activity and a good correlation exists between hydrocarbon concentrations and bacteria able to use these substrates as a carbon and energy source.     

An economic analysis of illegal, unreported and unregulated (IUU) fishing: Key drivers and possible solutions

The fight against illegal, unreported and unregulated (IUU) fishing activities has recently become a high priority in the international fisheries management agenda. While a number of academic contributions have sought to improve the understanding of the problem, most remain limited in scope. To help policy makers obtain a more comprehensive picture of the situation, the OECD Committee for Fisheries recently completed a study addressing the full economic dimensions of IUU fishing in an integrated manner. This paper presents the analytical framework developed by the OECD as well as some of the key results of the study regarding the causes of and the potential solutions to this widespread problem.     

Turbulent Dissipation Rate In The Boundary Layer Via Uhf Wind Profiler Doppler Spectral Width Measurements

The study is focused on the retrieval and validation of the turbulent kinetic energy dissipation rate from spectral width measurements made by a UHF wind profiler in the convective atmospheric boundary layer. The possibility to deduce , which is one of the most important parameters for boundary-layer study and monitoring, from Doppler radar spectral width measurements has a firm theoretical basis established by numerous earlier works. However, the major drawback of this approach lies in various meteorological and instrumental sources of non-turbulent spectral width broadening which have to be recognised and accounted for. In the first part of the study, the theoretical background of the retrieval is detailed and all possible causes of spectral broadening are listed and evaluated. In the second part, the method is applied to four days of UHF diurnal boundary-layer observations, collected during the TRAC-98 experiment, for which in situ aircraft measurements were available. Comparison between radar-retrieved and in situ aircraft measurements yields a fairly good agreement with a linear correlation coefficient of about 0.9 and a residual bias less than 2 × 10^-4 m² s^-3. The analysis of derived from vertical and off-zenith observation leads to the recommendation, that in the boundary layer, where the wind is usually moderate, data collected by off-zenith beams should be used. Indeed, the measurement of the vertical spectral width, less affected by the large-scale broadening factor, can still be altered by the ground clutter removal.     

Global warming of the mantle beneath continents back to the Archaean

Throughout its history, the Earth has experienced global magmatic events that correlate with the formation of supercontinents. This suggests that the distribution of continents at the Earth's surface is fundamental in regulating mantle temperature. Nevertheless, most large igneous provinces (LIPs) are explained in terms of the interaction of a hot plume with the lithosphere, even though some do not show evidence for such a mechanism. The aggregation of continents impacts on the temperature and flow of the underlying mantle through thermal insulation and enlargement of the convection wavelength. Both processes tend to increase the temperature below the continental lithosphere, eventually triggering melting events without the involvement of hot plumes. This model, called mantle global warming, has been tested using 3D numerical simulations of mantle convection [Coltice, N., Phillips, B.R., Bertrand, H., Ricard, Y., Rey, P. (2007) Global warming of the mantle at the origin of flood basalts over supercontinents. Geology 35, 391–394.]. Here, we apply this model to several continental flood basalts (CFBs) ranging in age from the Mesozoic to the Archaean. Our numerical simulations show that the mantle global warming model could account for the peculiarities of magmatic provinces that developed during the formation of Pangea and Rodinia, as well as putative Archaean supercontinents such as Kenorland and Zimvaalbara.     

Modes of orogen-parallel stretching and extensional exhumation in response to microplate indentation and roll-back subduction (Tauern Window, Eastern Alps)

The Tauern Window exposes a Paleogene nappe stack consisting of highly metamorphosed oceanic (Alpine Tethys) and continental (distal European margin) thrust sheets. In the eastern part of this window, this nappe stack (Eastern Tauern Subdome, ETD) is bounded by a Neogene system of shear (the Katschberg Shear Zone System, KSZS) that accommodated orogen-parallel stretching, orogen-normal shortening, and exhumation with respect to the structurally overlying Austroalpine units (Adriatic margin). The KSZS comprises a ≤5-km-thick belt of retrograde mylonite, the central segment of which is a southeast-dipping, low-angle extensional shear zone with a brittle overprint (Katschberg Normal Fault, KNF). At the northern and southern ends of this central segment, the KSZS loses its brittle overprint and swings around both corners of the ETD to become subvertical, dextral, and sinistral strike-slip faults. The latter represent stretching faults whose displacements decrease westward to near zero. The kinematic continuity of top-east to top-southeast ductile shearing along the central, low-angle extensional part of the KSZS with strike-slip shearing along its steep ends, combined with maximum tectonic omission of nappes of the ETD in the footwall of the KNF, indicates that north–south shortening, orogen-parallel stretching, and normal faulting were coeval. Stratigraphic and radiometric ages constrain exhumation of the folded nappe complex in the footwall of the KSZS to have begun at 23–21 Ma, leading to rapid cooling between 21 and 16 Ma. This exhumation involved a combination of tectonic unroofing by extensional shearing, upright folding, and erosional denudation. The contribution of tectonic unroofing is greatest along the central segment of the KSZS and decreases westward to the central part of the Tauern Window. The KSZS formed in response to the indentation of wedge-shaped blocks of semi-rigid Austroalpine basement located in front of the South-Alpine indenter that was part of the Adriatic microplate. Northward motion of this indenter along the sinistral Giudicarie Belt offsets the Periadriatic Fault and triggered rapid exhumation of orogenic crust within the entire Tauern Window. Exhumation involved strike-slip and normal faulting that accommodated about 100 km of orogen-parallel extension and was contemporaneous with about 30 km of orogen-perpendicular, north–south shortening of the ETD. Extension of the Pannonian Basin related to roll-back subduction in the Carpathians began at 20 Ma, but did not affect the Eastern Alps before about 17 Ma. The effect of this extension was to reduce the lateral resistance to eastward crustal flow away from the zone of greatest thickening in the Tauern Window area. Therefore, we propose that roll-back subduction temporarily enhanced rather than triggered exhumation and orogen-parallel motion in the Eastern Alps. Lateral extrusion and orogen-parallel extension in the Eastern Alps have continued from 12 to 10 Ma to the present and are driven by northward push of Adria.     

Palaeolimnology of Lake Sapanca and identification of historic earthquake signals,Northern Anatolian Fault Zone (Turkey)

Lake Sapanca is located on a strand of the Northern Anatolian Fault Zone (NAFZ, Turkey), where a series of strong earthquakes (Ms >6.0) have occurred over the past hundred years. Identifying prehistoric earthquakes in and around Lake Sapanca is key to a better understanding of plate movements along the NAFZ. This study contributes to the development of palaeolimnological tools to identify past earthquakes in Lake Sapanca. To this end several promising proxies were investigated, specifically lithology, magnetic susceptibility, grain size (thin-section and laser analysis), geochemistry, pollen concentration, diatom assemblages, ¹³⁷Cs and ²¹⁰Pb. Sedimentological indicators provided evidence for reworked, turbidite-like or homogeneous facies (event layers) in several short cores (<45 cm). Other indicators of sediment input and the historical chronicles available for the area suggest that three of these event layers likely originated from the AD 1957, 1967 and 1999 earthquakes. Recent changes in sediment deposition and nutrient levels have also been identified, but are probably not related to earthquakes. This study demonstrates that a combination of indicators can be used to recognize earthquake-related event layers in cores that encompass a longer period of time.     

Full-Scale Dynamic Analysis of an Innovative Rockfall Fence Under Impact Using the Discrete Element Method: from the Local Scale to the Structure Scale

In order to protect infrastructures against rockfalls, civil-engineered mitigation measures are widely used. Flexible metallic fences are particularly well suited to stop the propagation of blocks of rock whose kinetic energy can reach 5000?kJ before impact. This paper focuses on the design of highly flexible rockfall fences under the new European guideline ETAG027. The experimental testing and the numerical modeling using the discrete element method (DEM) of a new metallic rockfall fence are presented. Several scales of study were considered; the mesh, the net and the entire structure. The calibration of the DEM models is described and a parametrical study is proposed. The latter aims to underline the type of information that can be obtained from numerical simulations of such a system to enhance its design.     

Plio-Quaternary thin-skinned tectonics along the crustal front flexure of the southern Central Andes: a record of the regional stress regime or of local tectonic-driven gravitational processes?

We present here a record of Plio-Pleistocene deformations above the flexural front of the southern Central Andes of Argentina. We combine a seismic profile with structural and geomorphological observations to show that thin-skinned extension located on top of the crustal front flexure is coeval with thin-skinned shortening at the toe of the topographic bulge. The seismic line shows that a flat zone with no internal deformation separates the stretched and shortened domains. Such features are usually interpreted as the result of strike-slip faulting along basement faults, or tangential longitudinal strain folding in the soft sedimentary cover above crustal bending. We propose an alternative linking extension at the apex of the crustal anticline, to basal contraction by the downslope translation of a rigid thin nappe of sediments (30 × 30 km² in area) above evaporites at a depth of 700–900 m. The size of such a process is unusually large onshore (630–810 km³) but mimics the gravity gliding observed in deltas and passive margins. Since this process disconnects zones with a shallow stress field from deeper crustal levels, it could allow extension above a compressive deformation front and should not be interpreted merely as a record of the crustal stress regime. Large-scale gravity gliding of the cover down the slope of a structural high could also explain some of the extension observed in mountain hinterlands.     

A tomographic imagery segmentation methodology for three-phase geomaterials based on simultaneous region growing

X-ray computed tomography is a powerful non-destructive technique used in many domains to obtain the three-dimensional representation of objects, starting from the reconstitution of two-dimensional images of radiographic scanning. This technique is now able to analyze objects within a few micron resolutions. Consequently, X-ray microcomputed tomography opens perspectives for the analysis of the fabric of multiphase geomaterials such as soils, concretes, rocks and ceramics. To be able to characterize the spatial distribution of the different phases in such complex and disordered materials, automated phase recognition has to be implemented through image segmentation. A crucial difficulty in segmenting images lies in the presence of noise in the obtained tomographic representation, making it difficult to assign a specific phase to each voxel of the image. In the present study, simultaneous region growing is used to reconstitute the three-dimensional segmented image of granular materials. First, based on a set of expected phases in the image, regions where specific phases are sure to be present are identified, leaving uncertain regions of the image unidentified. Subsequently, the identified regions are grown until growing phases meet each other with vanishing unidentified regions. The method requires a limited number of manual parameters that are easily determined. The developed method is illustrated based on three applications on granular materials, comparing the phase volume fractions obtained by segmentation with macroscopic data. It is demonstrated that the algorithm rapidly converges and fills the image after a few iterations.