ADS40航空数码摄影相机的校准

高性能的航摄相机需要高分辨率几何校准、光谱校准和辐射线测量校准。LH系统公司和德国宇航中心(DLR)拥有符合这些严格规范的仪器。本文论述了LH系统公司新的ADS40数码摄影相机的基本操作原理,并给出了第一次交叉测量的结果。     

The future of industrial cities and regions in central and eastern Europe

Economic transition in central and eastern Europe (CEE) has had a particularly strong impact on industrial cities and regions. Following their economic collapse, most of them are now confronted with serious problems such as high unemployment and vast ecological damage. The paper presents findings from a pan European research project that investigated the problems of these cities and regions as well as the strategies being adopted to cope with structural change. It examines the differences in approaches and addresses the question whether existing EU policy is suitable for supporting the redevelopment of old industrial cities and regions in CEE countries. The paper concludes with recommendations for future directions in policy making.     

Simulating coseismic deformation of quartz in the middle crust and fabric evolution during postseismic stress relaxation — An experimental study

Non-steady state deformation and annealing experiments on vein quartz are designed to simulate earthquake-driven episodic deformation in the middle crust. Three types of experiments were carried out using a modified Griggs-type solid medium deformation apparatus. All three start with high stress deformation at a temperature of 400 °C and a constant strain rate of 10^− 4 s^− 1 (type A), some are followed by annealing in the stability field of α-quartz for 14–15 h at zero nominal differential stress and temperatures of 800–1000 °C (type A + B), or by annealing for 15 h at 900 °C and at a residual stress (type A + C).The quartz samples reveal a very high strength > 2 GPa at a few percent of permanent strain. The microstructures after short-term high stress deformation (type A) record localized brittle and plastic deformation. Statisc annealing (type A + B) results in recrystallisation restricted to the highly damaged zones. The new grains aligned in strings and without crystallographic preferred orientation, indicate nucleation and growth. Annealing at non-hydrostatic conditions (type A + C) results in shear zones that also develop from deformation bands or cracks that formed during the preceding high stress deformation. In this case, however, the recrystallised zone is several grain diameters wide, the grains are elongate, and a marked crystallographic preferred orientation indicates flow by dislocation creep with dynamic recrystallisation. Quartz microstructures identical to those produced in type A + B experiments are observed in cores recovered from Long Valley Exploratory Well in the Quaternary Long Valley Caldera, California, with considerable seismic activity.The experiments demonstrate the behaviour of quartz at coseismic loading (type A) and subsequent static annealing (type A + B) or creep at decaying stress (type A + C) in the middle crust. The experimentally produced microfabrics allow to identify similar processes and conditions in exhumed rocks.     

Constraining the Mass Distribution of Cluster Galaxies by Weak Lensing

Analysing the weak lensing distortions of the images of faint background galaxies provides a means to constrain the average mass distribution of cluster galaxies and potentially to test the extent of their dark matter haloes as a function of the density of their environment. The observable image distortions are a consequence of the interplay between the effects of a global cluster mass distribution and the perturbations resulting from individual cluster galaxies. Starting from a reconstruction of the cluster mass distribution with conventional techniques, we apply a maximum likelihood method to infer the average properties of an ensemble of cluster galaxies. From simulations this approach is found to be reliable as long as the galaxies including their dark matter haloes only contribute a small fraction to the total mass of the system. If their haloes are extended, the galaxies contain a substantial mass fraction. In this case our method is still applicable in the outer regions of clusters, where the surface mass density is low, but yields biased estimates of the parameters describing the mass profiles of the cluster galaxies in the central part of the cluster. In that case it will be necessary to resort to more sophisticated strategies by modelling cluster galaxies and an underlying global mass distribution simultaneously. We conclude that galaxy–galaxy lensing in clusters provides a unique means to probe the presence and extent of dark haloes of cluster galaxies.     

The barometric tides at Zürich and on the summit of Säntis

Summary Lunar barometric tidal determinations (L ₂) have been made by the Chapman-Miller method for Zürich (493 m) and Säntis (2000 m) based on 49 years' data. The seasonal variations ofL ₂ are much larger at Zürich than on the Säntis summit. However, a comparison with the five other pairs of stations for which tidal determinations at different altitudes, but short horizontal distances, are available do not indicate that this result is as an altitude effect, nor do they show any other systematic differences betweenL ₂ at the lower and the higher station. The solar tidal determinations agree well with those made byEggenberger (1944) and fit in with those obtained for other stations. From the difference between the pressure oscillations at Zürich and on Säntis the corresponding meantemperature oscillations of the air column between the two stations has been computed.The National Center for Atmospheric Research is sponsored by the National Science Foundation.     

Footwall mineralization during Late Miocene extension along the West Cycladic Detachment System,Lavrion, Greece

The West Cycladic Detachment System (WCDS) has been mapped from the western Cycladic islands to Lavrion (mainland Greece), where several top‐to‐SSW low‐angle normal faults at different structural levels are observed. Near the detachment horizon, hydrothermal fluid flow originating from Miocene intrusions lead to high‐temperature carbonate strata‐bound Pb–Ag–Zn ore deposits. Zircon (U–Th)/He cooling ages from the mineralized footwall are 7.1 ± 0.6 to 7.9 ± 0.6 Ma. Carbon‐ and O‐isotope analyses of the carbonate host indicate high water‐to‐rock ratios during brittle deformation‐induced metasomatism, and that this interaction, unrelated to proximity of the intrusions, plays the dominant role in the mineralization. The Late Miocene geology of Lavrion is strikingly similar to Serifos island on the SE termination of the WCDS, both characterized by strong localization of detachment faulting and the interaction of brittle deformation with the injection of fluids related to granitoid intrusions.     

Levelling of helicopter-borne frequency-domain electromagnetic data

For about three decades helicopter-borne electromagnetic (HEM) measurements have been used to reveal the resistivity distribution of the upper one hundred metres of the earth's subsurface. HEM systems record secondary fields, which are 3–6 orders of magnitude smaller than the transmitted primary fields. As both the primary fields and the secondary fields are present at the receivers, well-designed bucking coils are often used to reduce the primary fields at the receivers to a minimum. Remaining parts of the primary fields, the zero levels, are generally corrected by subtracting field values recorded at high altitudes (standard zero levelling) or estimated from resistivities of neighbouring lines or from resistivity maps (advanced zero levelling). These zero-levelling techniques enable the correction for long-term, quasi-linear instrumental drift. Short-term variations caused by temperature changes due to altitude variations, however, cannot be completely corrected by this procedure resulting in stripe patterns on thematic maps.Statistical methods and/or 2-D filter techniques called statistical levelling (tie-line levelling) and empirical levelling (microlevelling), respectively, used to correct stripe patterns in airborne geophysical data sets are, in general, not directly applicable to HEM data. Because HEM data levelling faces the problem that the parameter affected by zero-level errors, the secondary field, differs from the parameter generally levelled, the apparent resistivity. Furthermore, the dependency of the secondary field on both the resistivity of the subsurface and the sensor altitude is strongly nonlinear.A reasonable compromise is to microlevel both half-space parameters: apparent resistivity and apparent depth, followed by a recalculation of the secondary field components based on the half-space parameters levelled. Advantages and disadvantages of the diverse levelling techniques are discussed using a HEM data set obtained in a hilly region along the Saale River between the cities of Saalfeld and Jena in central Germany. It turns out from a comparison of apparent resistivity and apparent depth maps derived from levelled HEM data that manually advanced zero levelling of major level errors and automatic microlevelling of remaining minor level errors yield the best results.     

Tectono‐sedimentary evolution of lower to middle Miocene half‐graben basins related to an extensional detachment fault (western Crete,Greece)

Crustal extension in the overriding plate at the Aegean subduction zone, related to the rollback of the subducting African slab in the Miocene, resulted in a detachment fault separating high‐pressure/low‐temperature (HP‐LT) metamorphic lower from non‐metamorphic upper tectonic units on Crete. In western Crete, detachment faulting at deeper crustal levels was accompanied by structural disintegration of the hangingwall leading to the formation of half‐graben‐type sedimentary basins filled by alluvial fan and fan‐delta deposits. The coarse‐grained clastic sediments in these half‐grabens are exclusively derived from the non‐metamorphic units atop the detachment fault. Being in direct tectonic contact with HP‐LT metamorphic rocks of the lower tectonic units today, the basins must have formed in the period between c. 20 and 15 Ma, prior to the exposure of the HP‐LT metamorphic rocks at the surface, and juxtaposed with the latter during ongoing deformation.