Acid mine drainage at a coal mine in the eastern Transvaal, South Africa

 Several mines in the Witbank coalfield in South Africa are affected by acid mine drainage. This has led to a deterioration in the water quality in many surface streams. The Loubert Mine is one such mine. Hence, an initial investigation was carried out to determine the source of acid mine drainage pollution and the associated hydrogeological conditions. The investigation showed that most of the acid mine drainage is emanating from old opencast workings which have been backfilled. Most of the water from the backfilled area drains into control reservoirs. Unfortunately their capacity is limited, which means that water overspills and seeps from them. This water finds its way into a nearby stream, the water of which accordingly has an unacceptably low pH value and high sulphate content. The proposals advanced to control the problem basically involve inhibiting the amount of water infiltrating the backfilled opencast area on the one hand and reducing the amount of water entering the control reservoirs on the other. Received: 5 March 1997 · Accepted: 17 June 1997     

Exploring the Moon's surface for remnants of the lunar mantle 1. Dunite xenoliths in mare basalts. A crustal or mantle origin?

Remotely sensed observations from recent missions (e.g., GRAIL, Kaguya, Chandrayaan‐1) have been interpreted as indicating that the deep crust and upper mantle are close to or at the lunar surface in many large impact basins (e.g., Crisium, Apollo, Moscoviense). If this is correct, the capability of either impact or volcanic processes to transport mantle lithologies to the lunar surface should be enhanced in these regions. Somewhat problematic to these observations and interpretations is that examples of mantle lithologies in the lunar sample collection (Apollo Program, Luna Program, lunar meteorites) are at best ambiguous. Dunite xenoliths in high‐Ti mare basalt 74275 are one of these ambiguous examples. In this high‐Ti mare basalt, olivine occurs in three generations: olivine associated with dunite xenoliths, olivine megacrysts, and olivine microphenocrysts. The dunite xenoliths are anhedral in shape and are generally greater than 800 μm in diameter. The interior of the xenoliths are fairly homogeneous with regard to many divalent cations. For example, the Mg# (Mg/Mg + Fe × 100) ranges from 82 to 83 in their interiors and decreases from 82 to 68 over the 10–30 μm wide outer rim. Titanium and phosphorus X‐ray maps of the xenolith illustrate that these slow diffusing elements preserve primary cumulate zoning textures. These textures indicate that the xenoliths consist of many individual olivine grains approximately 150–200 μm in diameter with low Ti, Al, and P cores. These highly incompatible elements are enriched in the outer Fe‐rich rims of the xenoliths and slightly enriched in the rims of the individual olivine grains. Highly compatible elements in olivine such as Ni exhibit a decrease in the rim surrounding the xenolith, an increase in the incompatible element depleted cores of the individual olivine grains, and a slight decrease in the “interior rims” of the individual olivine grains. Inferred melt composition, liquid lines of descent, and zoning profiles enable the reconstruction of the petrogenesis of the dunite xenoliths. Preservation of primary magmatic zoning (Ti, P, Al) and lack of textures similar to high‐pressure mineral assemblages exhibited by the Mg‐suite (Shearer et al. 2015) indicate that these xenoliths do not represent deep crustal or shallow mantle lithologies. Further, they are chemically and mineralogically distinct from Mg‐suite dunites identified from the Apollo 17 site. More likely, they represent olivine cumulates that crystallized from a low‐Ti mare basalt at intermediate to shallow crustal levels. The parent basalt to the dunite xenolith lithology was more primitive than low‐Ti basalts thus far returned from the Moon. Furthermore, this parental magma and its more evolved daughter magmas are not represented in the basalt sample suite returned from the Taurus‐Littrow Valley by the Apollo 17 mission. The dunite xenolith records several episodes of crystallization and re‐equilibration. During the last episode of re‐equilibration, the dunite cumulate was sampled by the 74275 high‐Ti basalt and transported over a period of 30–70 days to the lunar surface.     

STAGES: the Space Telescope A901/2 Galaxy Evolution Survey

We present an overview of the Space Telescope A901/2 Galaxy Evolution Survey (STAGES). STAGES is a multiwavelength project designed to probe physical drivers of galaxy evolution across a wide range of environments and luminosity. A complex multicluster system at   z ∼ 0.165  has been the subject of an 80-orbit F606W Hubble Space Telescope (HST) /Advanced Camera for Surveys (ACS) mosaic covering the full     span of the supercluster. Extensive multiwavelength observations with XMM–Newton , GALEX, Spitzer , 2dF, Giant Metrewave Radio Telescope and the 17-band COMBO-17 photometric redshift survey complement the HST imaging. Our survey goals include simultaneously linking galaxy morphology with other observables such as age, star formation rate, nuclear activity and stellar mass. In addition, with the multiwavelength data set and new high-resolution mass maps from gravitational lensing, we are able to disentangle the large-scale structure of the system. By examining all aspects of an environment we will be able to evaluate the relative importance of the dark matter haloes, the local galaxy density and the hot X-ray gas in driving galaxy transformation. This paper describes the HST imaging, data reduction and creation of a master catalogue. We perform the Sérsic fitting on the HST images and conduct associated simulations to quantify completeness. In addition, we present the COMBO-17 photometric redshift catalogue and estimates of stellar masses and star formation rates for this field. We define galaxy and cluster sample selection criteria, which will be the basis for forthcoming science analyses, and present a compilation of notable objects in the field. Finally, we describe the further multiwavelength observations and announce public access to the data and catalogues.     

Selection effects in the SDSS quasar sample: the filter gap footprint

Locating the exact point of origin of the core radiation in active galactic nuclei (AGN) would represent important progress in our understanding of physical processes in the central engine of these objects. However, due to our inability to resolve the region containing both the central compact object and the jet base, this has so far been difficult. Here, using an analysis in which the lack of resolution does not play a significant role, we demonstrate that it may be impossible even in most radio loud sources for more than a small percentage of the core radiation at radio wavelengths to come from the jet base. We find for 3C279 that ∼85 percent of the core flux at 15 GHz must come from a separate, reasonably stable, region that is not part of the jet base, and that then likely radiates at least quasi-isotropically and is centered on the black hole. The long-term stability of this component also suggests that it may originate in a region that extends over many Schwarzschild radii.     

Mapping bathymetry using X-band marine radar data recorded from a moving vessel

Marine radars mounted on ships can provide remarkable insights into ocean behaviour from distances of several kilometres, placing other in situ observations and the environment around a ship into a wider oceanographic context. It has been known for some time that it is possible to map shallow water bathymetry and currents using radar image sequences recorded from shore based stations. However, a long standing question from military and hydrographic communities has been whether such techniques can be applied to radar data collected by moving vessels. If so, this presents the possibility of mapping large areas of shallow or coastal seas (albeit with a somewhat coarse horizontal resolution of 50–100 m) prior to the surveying vessel actually having to travel into potentially uncharted or dangerous shallow water areas. Trial sets of radar data were recorded by the Canadian Forces Auxiliary Vessel Quest using a Wamos radar digitiser connected to a Decca navigation radar during a number of deployments around Nova Scotia in 2008 and 2009. Georeferencing corrections derived from the existing ship navigation systems were sufficient to allow the application of the existing depth inversion analysis designed for static radar installations. This paper presents the results of bathymetry analyses of two datasets recorded from CFAV Quest while the vessel was travelling at speeds of up to 14 knots. The bathymetry derived from the radar data compare favourably with independent surveys and with the on-board echo sounder to depths of approximately 50 m.     

Complex microstructures preserved in rocks with a simple matrix: significance for deformation and metamorphic processes

Schists from the foothills of the Central Sierra Nevada contain one dominant matrix foliation and yet four phases of growth of both cordierite and andalusite porphyroblasts can be distinguished. These occurred early during four separate deformation events that formed successive steep and shallow foliations. A fifth deformation event pre-dates the growth of all porphyroblasts studied. The multiple phases of porphyroblast growth allow correlation of structures across and along the region. A repeated pattern of deformation, in terms of the curvature of earlier foliations against the overprinting one, allows samples containing porphyroblasts with simpler inclusion trail geometries to be interpreted with confidence. The large-scale fold structures in this region formed before or during the second of the five deformation events recorded by the porphyroblasts. However, the matrix foliation is predominantly a product of the fourth deformation, which has commonly reactivated or re-used older foliations, and is dominated by east-side-up shear. The intervening third deformation produced locally intense foliations and was accompanied by top-to-the-east shear. The very weak fifth deformation produced weak crenulations with subhorizontal axial planes and was coaxial. Multiple phases of episodic but synchronous growth of cordierite and andalusite were produced by the KFMASH univariant equilibrium Ms+Chl+Qtz=And+Crd+Bt+H₂O. The rocks crossed this reaction at a pressure just below the intersection with the KFMASH divariant equilibrium Ms+Chl+Qtz=Crd+Bt+H₂O; the latter being overstepped in favour of the former as there is no evidence for cordierite growth prior to andalusite in these rocks. Subsequent multiple episodes of synchronous growth of cordierite and andalusite indicate that the possible variation in P–T during subsequent deformations was not large. This requires the high-amplitude macroscopic fold to form prior to porphyroblast growth and then be simply tightened and modified by the younger deformations.     

An experimental study of aerosol scavenging by hexagonal plate ice crystals

The scavenging efficiency, E, of small hexagonal plate ice crystals for aerosol particles has been measured in a series of laboratory cloud experiments. The ice crystal diameters, D μm ranged from 35 to 150 μm with aerosol particles in the range 4 to 6 μm. An ice crystal replication technique made possible the individual examination of more than 43m500 individual crystals from which the relation: log₁₀ E = 1.554 − 1.047 log₁₀D was established with values of E in the range 0.2–0.9 corresponding to the range of crystal sizes investigated. For some crystal collectors, values of E extended above unity and this was attributed to wake capture, oscillations and the extended sweep out path of the ice crystals associated with their spiral fall pattern.     

Ne vii emission lines in the solar EUV spectrum

Recent calculations of electron and proton impact excitation rates in Nevii are used to calculate theoretical emission line ratios involving both n=0 (2–2) and n=1 (2–3) transitions in the 97–895 Å wavelength range. A comparison of these with existing solar observations, obtained by instruments on rocket flights and on the Skylab mission, reveals generally good agreement between theory and observation. This provides experimental support for the accuracy of the atomic data adopted in the line ratio calculations, and implies that the latter may be applied with confidence to the analysis of solar and stellar spectra from current and future satellite missions.     

Visible and near-infra-red transmission and reflectance measurements of the Luna 20 soil

Visible and near-infra-red spectra of chemically analyzed grains of glass and minerals from the Luna 20 sample were compared with diffuse reflectance spectra of the bulk soil. As in the spectra of soil samples from other localities on the Moon, pyroxene contributes two broad absorption features near 1 μm and 2 μm. The soil has a high integral reflectance (or albedo) arising from plagioclase, which appears to be the dominant mineral in the lunar highlands. The Luna 20 soil curve is most similar to the reflectance curves of the non-rayed soils at Apollo 16, in agreement with the generally similar mineralogy of these samples. The average pyroxene composition in the Luna 20 soil, as determined from the absorption bands in the diffuse reflectance spectra, and analyses of single crystals, is more calcic than in the lithic fragments. Thus, the soil appears to have a few per cent of admixed material derived from mare basalts. Comparison of the soil spectrum with telescopic curves of nearby areas reveals a close similarity; however, the Luna 20 sample is slightly less mature than expected. Luna 20 may have sampled subsurface material that is fresher than the regional surface soil, or alternatively, the Luna 20 area may contain an admixture of relatively recently exposed material from a ray crater.     

An interlaboratory comparison of piston-cylinder pressure calibration using the albite-breakdown reaction

The pressure of the reaction albite=jadeite and quartz was measured at 600° C by workers in six geophysical laboratories for the purpose of comparing pressure calibration procedures for the solid-pressure piston-cylinder apparatus. All groups used the same starting mix of crystalline reactant and products and all obtained hydrothermal reversals of the equilibrium. Solid pressure media used included talc, NaCl, boron nitride, pyrophyllite, pyrex glass and crushable ceramic. Various means of calibration were used, including internal standardization by transitions in indicator substances and the piston-in, piston-out bracketing method.There was agreement among all groups—the average preferred value of 16.3 kilobars at 600° C is enclosed by all of the error brackets assigned by the various investigators. This average preferred value is lower by nearly two kilobars than the often-quoted extrapolation of Birch and LeComte's data (1960). It will be important for both petrology and high-pressure technology to test this result in a very high gas pressure apparatus.