Dust formation in hot stars

It is known that the extremely hot environments of Wolf-Rayet stars and novae support dust formation, although in some selected cases only. The similarities in the luminosities of these objects suggest similar mechanisms of dust formation. The situation is reviewed in terms of the number of ionizing photons available for hydrogen, carbon and nitrogen other than helium. The larger abundance of nitrogen in the ejecta modifies these numbers significantly. Simple calculations for neutral carbon atoms via recombinations show that a critical condition is required to be met with for this purpose. This can be understood as due to the strong UV fields which leave the grains positively charged. Further, the type of dust appears to be decided by the ingredients constituting the ejecta.     

Numerical modelling of the impact crater depth-diameter dependence in an acoustically fluidized target

2D numerical modelling of impact cratering has been utilized to quantify an important depth-diameter relationship for different crater morphologies, simple and complex. It is generally accepted that the final crater shape is the result of a gravity-driven collapse of the transient crater, which is formed immediately after the impact. Numerical models allow a quantification of the formation of simple craters, which are bowl-shaped depressions with a lens of rock debris inside, and complex craters, which are characterized by a structural uplift. The computation of the cratering process starts with the first contact of the impactor and the planetary surface and ends with the morphology of the final crater. Using different rheological models for the sub-crater rocks, we quantify the influence on crater mechanics. To explain the formation of complex craters in accordance to the threshold diameter between simple and complex craters, we utilize the Acoustic Fluidization model. We carried out a series of simulations over a broad parameter range with the goal to fit the observed depth/diameter relationships as well as the observed threshold diameters on the Moon, Earth and Venus.     

The second order characteristic condition for plastic flow

In this paper the second order characteristic (discontinuous bifurcation) condition is derived for the granular flow (fully plastic) equations. This second order bifurcation equation is shown to be formally identical to the first order localization requirement during steady elastoplastic deformation provided the elastic compliance tensor is substituted for the product of the plastic multiplier with the flow Hessian. For isotropic yield and flow functions the invariant form of the characteristic condition is given in detail, as well as an alternative expression in adapted co‐ordinates. The characteristic condition can be regarded as defining a hardening function which is maximized to identify the critical angles. When the method is applied to 3D Coulomb flow, Mohr's 3D fracture plane conditions are obtained uniquely. Copyright © 2003 John Wiley & Sons, Ltd.     

Disc–Planet Interactions: Migration and Resonances in Extrasolar Planetary Systems

We consider orbital resonances in multiplanet systems. These are expected to arise during or just after formation in a gaseous disc. Disc–planet interaction naturally produces orbital migration and circularization through the action of tidal torques which in turn may lead to an orbital resonance. The mass and angular momentum content of the disc is likely to be comparable to that in the planets so that it is essential to fully incorporate the disc in the analysis.We study the orbital evolution of two planets locked in 2:1 commensurability through migration tidally induced by the disc using both analytic methods and numerical hydrodynamic simulations. The planets are assumed to orbit in an inner cavity containing at most only a small amount of disc material. Results are found to be sensitive to initial surface density profile, planet masses and disc parameters. The evolution may range between attaining and subsequently maintaining a resonance lock with two angles librating to divergent migration with no commensurability formed. In the former case eccentricities increase monotonically with time while the system undergoes inward migration. If the migration is halted by loss of the disc leaving the planets in a final configuration, there is likely to be a low probability of seeing resonant planets at small radii as well as a sensitive dependence on past history.We have also considered a multiplanet system in secular apsidal resonance. We consider the system as being in just one secular normal mode and include the effects of a gaseous disc. It is suggested that a normal mode may be selected by adding in some weak dissipative process in the disc and that it may remain, involving only the planets, when the disc is slowly removed.     

On the origin of high-eccentricity halo stars

The present-day chemical and dynamical properties of the Milky Way are signatures of the Galaxy's formation and evolution. Using a self consistent chemodynamical evolution code we examine these properties within the currently favoured paradigm for galaxy formation – hierarchical clustering within a CDM cosmology. Our Tree N-body/Smoothed Particle Hydrodynamics code includes a self-consistent treatment of gravity, hydrodynamics, radiative cooling, star formation, supernova feedback and chemical enrichment. Two models are described which explore the role of small-scale density perturbations in driving the evolution of structure within the Milky Way. The relationship between metallicity and kinematics of halo stars are quantified and the implications for galaxy formation discussed. While high-eccentricity halo stars have previously been considered a signature of `rapid collapse', we suggest that many such stars may have come from recently accreted satellites. This revised version was published online in August 2006 with corrections to the Cover Date.     

Observations with the Visual and Infrared Mapping Spectrometer (VIMS) during Cassini's flyby of Jupiter

The Cassini Visual and Infrared Mapping Spectrometer (VIMS) is an imaging spectrometer covering the wavelength range 0.3-5.2 μm in 352 spectral channels, with a nominal instantaneous field of view of 0.5 mrad. The Cassini flyby of Jupiter represented a unique opportunity to accomplish two important goals: scientific observations of the jovian system and functional tests of the VIMS instrument under conditions similar to those expected to obtain during Cassini's 4-year tour of the saturnian system. Results acquired over a complete range of visual to near-infrared wavelengths from 0.3 to 5.2 μm are presented. First detections include methane fluorescence on Jupiter, a surprisingly high opposition surge on Europa, the first visual-near-IR spectra of Himalia and Jupiter's optically-thin ring system, and the first near-infrared observations of the rings over an extensive range of phase angles (0-120°). Similarities in the center-to-limb profiles of H⁺₃ and CH₄ emissions indicate that the H⁺₃ ionospheric density is solar-controlled outside of the auroral regions. The existence of jovian NH₃ absorption at 0.93 μm is confirmed. Himalia has a slightly reddish spectrum, an apparent absorption near 3 μm, and a geometric albedo of 0.06±0.01 at 2.2 μm (assuming an 85-km radius). If the 3-μm feature in Himalia's spectrum is eventually confirmed, it would be suggestive of the presence of water in some form, either free, bound, or incorporated in layer-lattice silicates. Finally, a mean ring-particle radius of 10 μm is found to be consistent with Mie-scattering models fit to VIMS near-infrared observations acquired over 0-120° phase angle.     

Contribution of storms to groundwater recharge in the semi‐arid region of Karnataka,India

This paper describes the application of environmental isotopes and injected tracer techniques in estimating the contribution of storms as well as annual precipitation to groundwater recharge and its circulation, in the semi‐arid region of Bagepalli, Kolar district, Karnataka. Environmental isotopes ²H, ¹⁸O and ³H were used to study the effect of storms on the hydrological system, and an isotope balance was used to compute the contribution of a storm component to the groundwater. Some of the groundwater samples collected during the post‐storm periods were highly depleted in stable isotope content with higher deuterium excess relative to groundwater from the pre‐storm periods. Significant variation in deuterium excess in groundwater from the same area, collected in two different periods, indicates the different origin of air masses. The estimated recharge component of a storm event of 600 mm to the groundwater was found to be in the range of 117–165 mm. There was no significant variation in environmental tritium content of post‐storm and pre‐storm groundwater, indicating the fast circulation of groundwater in the system. After completion of the environmental isotope work, an injected radiotracer ³H technique was applied to estimate the direct recharge of total precipitation to the groundwater. The estimated recharge to the groundwater is 33 mm of the 550 mm annual precipitation during 1992. Copyright © 2003 John Wiley & Sons, Ltd.     

Mid-term quasi-periodicities in geomagnetic activity during the last 15 solar cycles: Connection to solar dynamo strength – To the memory of Karolen I. Paularena (1957-2001)

Several recent studies have reported quasi-periodicities with a period between 1 and 2 years (to be called here `mid-term quasi-periodicities') in various heliospheric parameters, like solar wind speed, interplanetary magnetic field, cosmic rays, and geomagnetic activity. Here we study their long-term occurrence in geomagnetic activity using an extended aa index which covers the last 15 solar cycles. We confirm their intermittent occurrence and the alternation of their dominant period between a slightly shorter period of about 1.2–1.4 years and a slightly longer period of about 1.5–1.7 years. We find that the mid-term quasi-periodicities were strong during two intervals of high solar activity: in the mid-19th century and since 1930. Instead, contrary to earlier studies, we find that they were consistently weak during low solar activity from 1860s to 1920s. This implies a long-term connection between the amplitude of mid-term quasi-periodicities and the solar dynamo strength. Since the rotation speed at the bottom of the solar convection layer (tachocline) has recently been found to vary at a mid-term periodicity, this suggests that the stronger the solar dynamo is, the more variable the rotation rate of the tachocline is. We also note that the disappearance of mid-term periodicities may be used as a precursor for long intervals of very weak solar activity, like great minima.     

Himalayan magmatism and porphyry copper–molybdenum mineralization in the Yulong ore belt, East Tibet

Summary ?The NW–SE-trending Yulong porphyry Cu–Mo ore belt, situated in the Sanjiang0 area of eastern Tibet, is approximately 400 km long and 35 to 70 km wide. Complex tectonic and magmatic processes during the Himalayan epoch have given rise to favorable conditions for porphyry-type Cu–Mo mineralization. Porphyry masses of the Himalayan epoch in the Yulong ore belt are distributed in groups along regional NW–SE striking tectonic lineaments. They were emplaced mainly into Triassic and Lower Permian sedimentary-volcanic rocks. K–Ar und U–Pb isotopic datings give an intrusion age range of 57–26 Ma. The porphyries are mainly of biotite monzogranitic and biotite syenogranitic compositions. Geological and geochemical data indicate that the various porphyritic intrusions in the belt had a common or similar magma source, are metaluminous to peraluminous, Nb–Y–Ba-depleted, I-type granitoids, and belong to the high-K calc-alkaline series. Within the Yulong subvolcanic belt a number of porphyry stocks bear typical porphyry type Cu–Mo alteration and mineralization. The most prominent porphyry Co–Mo deposits include Yulong, Malasongduo, Duoxiasongduo, Mangzong and Zhanaga, of which Yulong is one of the largest porphyry Cu (Mo) deposits in China with approximately 8 × 10⁶ tons of contained Cu metal. Hydrothermal alteration at Yulong developed around a biotite–monzogranitic porphyry stock that was emplaced within Upper Triassic limestone, siltstone and mudstone. The earliest alteration was due to the effects of contact metamorphism of the country rocks and alkali metasomatism (potassic alteration) within and around the porphyry body. The alteration of this stage was accompanied by a small amount of disseminated and veinlet Cu–Mo sulfide mineralization. Later alteration–mineralization zones form more or less concentric shells around the potassic zone, around which are distributed a phyllic or quartz–sericite–pyrite zone, a silicification and argillic zone, and a propylitic zone. Fluid inclusion data indicate that three types of fluids were involved in the alteration–mineralization processes: (1) early high temperature (660–420 °C) and high salinity (30–51 wt% NaCl equiv) fluids responsible for the potassic alteration and the earliest disseminated and/or veinlet Cu–Mo sulfide mineralization; (2) intermediate unmixed fluids corresponding to phyllic alteration and most Cu–Mo sulfide mineralization, with salinities of 30–50 wt% NaCl equiv and homogenization temperatures of 460–280 °C; and (3) late low to moderate temperature (300–160 °C) and low salinity (6–13 wt% NaCl equiv) fluids responsible for argillic and propylitic alteration. Hydrogen and oxygen isotopic studies show that the early hydrothermal fluids are of magmatic origin and were succeeded by increasing amounts of meteoric-derived convective waters. Sulfur isotopes also indicate a magmatic source for the sulfur in the early sulfide mineralization, with the increasing addition of sedimentary sulfur outward from the porphyry stock. Received August 29, 2001; revised version accepted May 1, 2002 Published online: November 29, 2002