Long-period eccentricity control on sedimentary sequences in the continental Madrid Basin (middle Miocene,Spain)

The middle Miocene Valdearenas–Muduex section in the internally-drained, continental Madrid Basin (central Spain) is dated bio-magnetostratigraphically between 15.2 Ma and 11.5 Ma. The section contains two formation-scale, sedimentary sequences, that both consist of a siliciclastic lower part and a calcareous upper part. Siliciclastic sedimentation took place in distal floodplain and fluvial environments, while limestones resulted from carbonate precipitation in calcic soil profiles and in ephemeral lacustrine water bodies. Spectral analysis of the L* colour time series points to the influence of the ～ 405-kyr and 0.97-Myr eccentricity cycles, while the bases of the two calcareous intervals correlate to successive minima of the 2.4-Myr eccentricity cycle. The 405-kyr cycle lags maximum eccentricity, whereas the 0.97 and 2.4-Myr cycles lag minimum eccentricity, each by approximately a quarter of a cycle. No obliquity forcing is detected. The observed orbital configuration of 2.4-Myr minima at the base of limestone-dominated intervals is similar to a previously documented Late Miocene shift in the Teruel Basin of northeast Spain. Our results indicate that long-period eccentricity climate forcing may well be a significant player on long, tectonic time scales in continental basin fill.     

Factors encouraging sustainability integration into institutions of higher education

In view of the mountainous evidence on destruction of environmental quality and societal well-being as a consequence of rapid economic development, sustainability has gained vast attention from the community and industrial players. Tertiary education is a platform through which sustainability can be inculcated within the society as it imparts knowledge and provides various trainings. There has been extensive research on factors that encourage sustainability integration into Institutions of Higher Education in the last decade. However, majority of the previous publications only discuss one or two factors exclusively and there is no literature that summarizes and discusses such factors in a collective manner. This paper provides an overview of the main factors that encourage sustainability integration into Institutions of Higher Education in the last decade. It aims at providing a one-stop reference for future researchers who need a reference on factors that encourage sustainability integration into Institutions of Higher Education, especially those who are interested in conducting a progressive research in this context. Accordingly, a review of relevant publications from year 2000 and above was conducted and it was found that there are generally eight main factors, which encourage sustainability integration into Institutions of Higher Education, which are: (1) integration into curricula; (2) suitable pedagogy; (3) campus management; (4) research; (5) opportunities provision; (6) availability of social capital; (7) awareness level; and (8) community outreach. There is no indicator on the impact level of these factors, and thus, it is suggested that relevant research can be conducted in future.     

Effects of some environmental parameters on the reproduction and development of a tropical marine harpacticoid copepod Nitocra affinis f. californica Lang

The effects of salinity, temperature, and light conditions on the reproduction and development of harpacticoid copepod, Nitocra affinis f. californica under controlled laboratory conditions were determined. Seven different salinity levels (5, 10, 15, 20, 25, 30, 35 ppt), four temperatures (20, 25, 30, 35 °C), three different light intensities (25, 56, 130 μmol m⁻² s⁻¹) and photoperiods (24 h:0 h, 1 h:23 h, 12 h:12 h LD cycle) were employed in this study. The highest (p < 0.05) overall reproduction and fastest development time were achieved by copepods reared under 30–35 ppt salinity. The optimum temperature required for the maximum reproduction was 30 °C while under 30 °C and 35 °C the copepod development time was shortest (p < 0.05) compared to other temperature levels. The overall reproduction was highest (p < 0.05) and development rate of N. affinis was shortest (p < 0.05) under lowest light intensity (25 μmol m⁻² s⁻¹). Continuous light (24 h:0 h LD) inhibited the egg production while, continuous darkness (1 h:23 h LD) and 12 h:12 h LD significantly favoured the overall reproductive activity of the female. Photoperiods 1 h:23 h and 12 h:12 h LD yielded highest total (p < 0.05) offspring female⁻¹ coupled with highest (p < 0.05) survival percentage. This study illustrated that although N. affinis can tolerate wide range of environmental conditions, prolonged exposure to subnormal environments affect its reproduction and development. This study showed that this species can be mass cultured for commercial purposes and has a potential to be used for toxicity studies due to its high reproductive performance fast development and a wide range of tolerance to environmental conditions.     

The construction of a third order secular analytical J-S-U-N theory by Hori-Lie technique

The first and second order generating functions and the first second and third order new J-S-U-N Hamiltonians are calculated by the Hori-Lie procedure.     

Structural analysis for metavolcanics and their metapyroclastics at gold deposit of the Mahd Ad Dahab area, Arabian Shield, Saudi Arabia

The present study focuses on the gold mining in Mahd Ad Dahab region of Saudi Arabia. The study aims to assess the spatial relationship between tectonic contacts in Mahd Ad Dahab area and to provide a meaningful hypothesis relating gold metallogeny to the evolution of the Arabian Shield. Distribution and localization of gold occurrences in the study area was envisaged based on the different styles of microstructures and the major deformation phases affecting the area. The detailed petrographical and mineralogical investigations indicate that the metavolcanic rocks at the Mahd Ad Dahab gold mine area can be classified into metabasalt, metaandesite, and the felsic varieties (metadacite, metarhyodacite and metarhyolite) associating their metapyroclastics (conglomerate and tuffs). Furthermore, quartz forms allotriomorphic crystals which exhibit wavy extinction, deformational lamina and foliation due to subsequent deformations. Furthermore, we conclude that finite strain in the deformed rocks is of the same order of magnitude for all units of metavolcano-sedimentary rocks. Furthermore, contacts formed during intrusion of plutons with some faults in the Mahd Ad Dahab area under brittle to semi-ductile deformation conditions. In this case, finite strain accumulated during superimposed deformation on the already assembled nappe structure. It indicates that the contacts formed during the accumulation of finite strain.     

The driving forces behind the Caspian Sea mean water level oscillations

Closed basins such as the Caspian Sea rapidly respond to variations in atmospheric and geological events. This study has been conducted to deduce the role of natural and anthropogenic influences on the Caspian Sea mean water level fluctuations for the period of 1998–2005. It is recognized that climate is the primary mechanism of the Caspian Sea mean water level variations based on the relatively small differences of the Caspian Sea hydrologic budget residuals and the Caspian Sea mean water level fluctuations. This is further supported by the similarity in water-level variations of the Caspian Sea with those of Lake Van and Lake Urmia. On the other hand, the Caspian Sea needed to lose some of its water to attain water balance equilibrium in 2000 and 2001. The year 2000 showed anomalous seismic activity particularly in the southwestern part of the Caspian Sea. Two significant earthquakes with magnitudes of 6.8 and 6.5 M_w occurred on November 25, 2000. The focal mechanisms of these earthquakes and numerous aftershocks indicated normal faulting and, therefore, caused the Caspian Sea lake level to decline in 2000. The contribution of submarine mud volcano eruptions to the Caspian Sea lake level could be insignificant based on the comparison of water budget residuals and the mean water level variations. Neither crustal deformation (based on the GPS measurements) nor the offshore oil and natural gas production activities in the Caspian Sea are responsible for noticeable changes to the level of the Caspian Sea.     

Waterflood management using two-stage optimization with streamline simulation

Waterflooding is a common secondary oil recovery process. Performance of waterfloods in mature fields with a significant number of wells can be improved with minimal infrastructure investment by optimizing injection/production rates of individual wells. However, a major bottleneck in the optimization framework is the large number of reservoir flow simulations often required. In this work, we propose a new method based on streamline-derived information that significantly reduces these computational costs in addition to making use of the computational efficiency of streamline simulation itself. We seek to maximize the long-term net present value of a waterflood by determining optimal individual well rates, given an expected albeit uncertain oil price and a total fluid injection volume. We approach the optimization problem by decomposing it into two stages which can be implemented in a computationally efficient manner. We show that the two-stage streamline-based optimization approach can be an effective technique when applied to reservoirs with a large number of wells in need of an efficient waterflooding strategy over a 5 to 15-year period.     

Study of subsurface structures using seismic reflection data for Kalar–Khanaqin area/Kurdistan region,Iraq

The study is carried out to detect the subsurface structures that have geological and economic importance by interpreting the available seismic reflection data of an area estimated to be about 1,752 km². The study comprises of the Kalar–Khanaqin and surrounding area, which is located at Zagros folded zone. Twenty-five seismic sections had been interpreted. The total length of all the seismic lines is about 650.4 km. Interpretation of the seismic data is focused on two reflectors, lower Fars and Jeribe formation. The lower Fars reflector picked at the two-way time ranging from 0.1 to 2.6 second, while the Jeribe reflector picked at the two-way time ranging from 1.0 to 2.7 second. The constructed maps denote to the existence of many closed and nose structures, in addition, to numerous fault types. All these features were detected in the area having the NW–SE trend. The depth of the lower Fars formation is ranging from 100.0 to 4,800.0 m, while the depth of the Jeribe formation is ranging from 1,700.0 to 5,000.0 m. The depth maps for the two formations also refer to the similarity of the major geological structures. These structures appear in both formations with existence of slight variation in dimensions. The closed structure no. (1) is located at the north of the study area. The nose structure no. (2) is located at the south of the area. At the west of the area, the elongated structure no. (3). The longitudinal reveres fault intersects the SW limb of the structure. The SW limb of elongated structure no. (4), intersect by longitudinal reveres fault, is located at the east of the area. There is also the semi-closed structure no. (5), which appears at the west of the area around the Qr-1 well. Most of detected faults are of reverse and thrust types having a variable amount of throws and horizontal displacements. Some seismic sections explained the existence of the decollement surface within lower Fars formation, which caused the thrusting and faulting of the overlaying beds.     

An assessment of paleodepositional environment and maturity of organic matter in sediments of the Setap Shale and Belait formations in West Sabah,East Malaysia by organic geochemical methods

The black shale samples collected from two Neogene formations in the Klias Peninsula area, West Sabah, have been assessed and characterized in details by gas chromatography, gas chromatography-mass spectrometry and a variety of organic geochemical parameters. The aims of this study are to describe the characteristics of organic matter of these sediments in terms of source/type of the organic matter, assess its thermal maturity and paleoenvironment of deposition, based primarily on biomarker distributions. The results of both formations do not reveal significant differences within the rock extracts. The gas chromatograms of the saturated hydrocarbon fractions of the Setap Shale and the Belait formations displayed monomodal n-alkane distributions and nearly identical regular sterane compositions with a predominance of C₂₇ regular steranes. These are consistent with open marine depositional environments dominated by marine biological matter. Another related feature of these rock extracts is the presence of a high relative abundance of gammacerane, indicating anoxic marine hypersaline source depositional environment. The relatively high abundance of common land plant-derived biomarkers, such as bicadinanes and oleananes, is a clear indication of a major terrigenous input to the source of the extractable organic matter. The predominance of oleanane biomarkers in both formations is indicative of angiospermis input and Tertiary source rocks. The high C₂₉/C₃₀ hopane ratios, moderate development of C₃₃–C₃₅ hopanes, high abundance of tricyclic terpanes and a slight predominance of C₂₇ regular sterane over C₂₈ and C₂₉ steranes are characteristic features tending to suggest a significant marine influence on these source rocks, thereby suggesting a mixed source input. The 22S/(22S+22R)C₃₂ hopane ratio has reached equilibrium, and this is supported by the high maturity level as indicated by the 22S/22SC_31–33 extended hopane ratios and 20S/(20S+20R)C₂₉ regular steranes ratios.