Frost risk mapping for landscape planning: A methodology

Summary Minimum air temperatures were measured during three winters with a network of stations in open, undulating terrain. It was observed that the change in minimum air temperature with elevation could be predicted from mean nighttime windspeed, total nighttime net radiation loss and a hill-top reference minimum temperature. It was also found that the deviation of temperatures at individual sites could be predicted from a local terrain parameter which reflects the extent of cold air accumulations. Thus a methodology for frost risk mapping has been developed which is based on regional weather dataand local terrain analysis. This paper describes the model and illustrates the regional weather and terrain effects with three-dimensional block diagrams.With 8 Figures     

A preliminary investigation into the use of ochre as a remedial amendment in arsenic-contaminated soils

Ochre is an unwanted waste product that accumulates in wetlands and streams draining abandoned coal and metal mines. A potential commercial use for ochre is to remediate As contaminated soil. Arsenic contaminated soil (605 mg kg⁻¹) was mixed with different ochres (A, B and C) in a mass ratio of 1:1 and shaken in 20 mL of deionised water. After 72 h As concentration in solution was ca. 500 μg kg⁻¹ in the control and 1–2.5 μg kg⁻¹ in the ochre treated experiments. In a second experiment soil:ochre mixtures of 0.05–1:1 were shaken in 20 mL of deionised water for 24 h. For Ochres A and C, as solution concentration was reduced to ca. 1 μg kg⁻¹ by 0.2–1:1 ochre:soil mixtures. For Ochre B, as concentration only reached ca. 1 μg kg⁻¹ in the 1:1 ochre:soil mix. Sorption of As was best modelled by a Freundlich isotherm using As sorption per mass of goethite in the ochre (log K = 1.64, n = 0.79, R² = 0.76, p 0.001). Efficiency of ochre in removing As from solution increased with increasing total Fe, goethite, citrate dithionite extractable Fe and surface area.     

Haynesville Shale Well Performance and Development Potential

Louisiana’s Haynesville Shale is one of several unconventional gas plays that have been discovered in the U.S. in recent years and promise to dramatically change the course of future domestic energy development. The Haynesville Shale is the deepest, hottest, and highest pressured shale among the big four plays in the U.S. with drilling and completion cost ranging between 7 and7 and 10 million per well. The average Haynesville well has an initial production rate of 10 MMcfd and declines rapidly, producing 80% of its expected recovery during the first 2 years of production. The purpose of this article is to describe the productivity characteristics of Haynesville wells, project future production from the inventory of active wells, and assess production potential based on drilling scenarios. We offer statistical analysis of the wells drilled to date and construct type profiles to characterize the play. We estimate that the current inventory of Haynesville wells will produce 3 Tcf over their lifecycles, and within the next 3 years, cumulative build-out in the region will range between 3 and 9 Tcf. To maintain current gas production levels in the state, we estimate that about 550 shale gas wells per year will need to be brought online over the next 3 years.     

Age and source material of the Kingash ultramafic-mafic massif,East Sayan

The REE distribution patterns and Nd whole-rock and mineral isotope ratios of the Kingash ultramafic-mafic massif enabled us to propose a multistage history for its evolution at 1410 and 875 Ma. These stages reflect the magmatic evolution of the Siberian paleocontinent margin during the Late Precambrian. The age of metamorphism of the massif during collision and accretion in the Early Paleozoic (∼500 Ma) was obtained based on a Sm-Nd mineral isochron from rheomorphic veined albitite. The Nd and Sr isotopic compositions of rocks from the Kingash massif suggest mantle sources for picritic and basic magmas, which are thought to have originated by mixing of different proportions of depleted (PREMA or DM) and enriched (EM) melts. The initial isotope ratios of the parental melts transformed during interaction with Sr-rich material from the host metasedimentary complexes.     

Coral reef ecosystems protect shore from high-energy waves under climate change scenarios

Coral reefs and other coastal ecosystems such as seagrasses and mangroves are widely recognized to provide protection against the devastating effects of strong waves associated with tsunamis and storms. The predicted warming climate brings to fore the role of these ecosystems in providing protection against stronger typhoons that can result in more devastating waves of greater amplitude. We performed a model simulation of storm generated waves on a Philippine reef, which is located along the path of tropical storms, i.e., at least 10 typhoons on the average pass through the study site yearly. A model to simulate wave propagation was developed using Simulating Waves Nearshore (SWAN) and DELFT3D-WAVE computer simulation software. Scenarios involving local monsoonal wind forcing and storm conditions were simulated. In addition, as climate change may also result to increased relative sea level, a 0.3 m and 1 m rise in sea level scenarios were also used in the wave model simulations. Results showed that the extensive reef system in the site helped dissipate wave energy that in turn reduced wave run-up on land. A significant reduction in wave energy was observed in both climate change, i.e., stronger wind and higher sea level, and non-climate change scenarios. This present study was conducted in a reef whose coral cover is in excellent condition (i.e., 50 to 80% coral cover). Estimates of coral reef growth are in the same order of magnitude as estimates of relative sea level rise based on tide gauge and satellite altimeter data, thus it is possible that the role of reefs in attenuating wave energy may be maintained if coral reef growth can keep up with the change in sea level. Nonetheless, to maintain reef growth, it is imperative to manage coral reef ecosystems sustainably and to eliminate the stressors that are within human control. Minimizing activities such as illegal and destructive blast and poison fishing methods, pollution and siltation, is crucial to minimize the impacts of high-energy waves that may increase with climate change.     

Estimating water balance components of tropical wetland lakes in the Pantanal dry season,Brazil

Abstract

Water balance studies with stable water isotopes have rarely been conducted in remote and tropical wetland areas. As such, little is known regarding the water balance and groundwater–surface water interaction in the Pantanal, one of the largest and most pristine wetlands in the world. We applied MINA TrêS, a water balance model utilizing stable water isotopes (δ¹⁸O, δ²H) and chloride (Cl^-) to assess the dry-season hydrological processes controlling groundwater–surface water interactions and the water balance of six floodplain lakes in the northern Pantanal, Brazil. Qualitatively, all lakes exhibited similarity in hydrological controls. Quantitatively, they differed significantly due to morphological differences in controlling groundwater inflow and lake volume. Our approach is readily transferable to other remote and tropical wetland systems with minimal data input requirements, which is useful in regions with sparse hydrometric monitoring.

Editor Z.W. Kundzewicz     

Uranium and lead gain of detrital zircon studied by isotopic analyses and fission-track mapping

Besides Pb and U loss and mixing of crystals of different age, U gain is considered a possible cause of discordant U-Pb ages of zircons. However, whether U gain without new zircon growth occurs in nature had not been proven, so far. In order to test this possibility, two detrital zircon populations were studied for which the absence of later zircon overgrowth after deposition could be demonstrated. The samples were separated from a metaquartzite near a large pegmatite body and from metaquartzite inclusions found in the pegmatite (Martell Valley, Italian Alps). The distribution of neutron-induced fission tracks reveals distinct accumulation of U in the rims of more than 90% of the zircon grains of the inclusions (total U in the crystals: 540–850 ppm), whereas in the country rock only some of the grains show similar but weaker patterns (total U: 155–320 ppm). From the isotopic data and from additional U-Pb and Rb-Sr analyses of minerals and whole-rock samples of the pegmatite, the marginal accumulation and the higher concentration of U in the zircon grains of the inclusions are interpreted as the result of episodic U gain during the intrusion of the pegmatite and/or during a later metamorphism. From the concentration levels of common Pb, an addition of Pb - and possibly other elements - to the zircon grains is inferred.     

Longshore variations in nearshore wave processes at magilligan point,northern ireland

Magilligan Point is a recurved cuspate foreland at the mouth of Lough Foyle. Two wave regimes intersect in the estuary mouth and the manner of their interplay controls shoreline changes. Ocean swell waves from the N and NE are refracted around the recurve, losing both height and energy longshore. Width of the surf zone decreases and waves tend to steepen, although both these changes and wave refraction owe something to nearshore geometry. Angle of wave approach becomes more acute and a westerly flowing longshore current moves sand S and SW along the beach. Estuary waves from the S and SW are wind-driven with high-frequencies and steepnesses. They generate a northeasterly current which returns material N, but dies out as the waves become obliterated by nearshore attenuation and breaking of swell. It is possible to identify a time-averaged null-point where shoreline wave power is balanced, although this tends to shift over short periods causing rapid morphological changes. The existence of two independent, but counteractive cells ensures the long-term maintenance of the foreland, without requiring major or continuous supplies of fresh sediment.     

The Extraction of Urban Surface Water from Hyperspectral Data Based on Spectral Indices

To prevent confusion between water and buildings in the extraction of urban surface water from hyperspectral data, we analyzed the spectra of shadows and water in hyperspectral images, and proposed an anti-shadow water extraction method. This method first uses the normalized difference vegetation index (NDVI) for initial water extraction, then uses the height of the reflectance peak at 588 nm to eliminate the shadow of buildings. The method was validated by two hyperspectral datacubes, which were obtained for Jiaxing City and Zhoushan City in Zhejiang Province, China. Compared to the common spectral indices used to extract a water body, such as the NDVI, normalized difference water index, hyperspectral difference water index, and index of water index, the proposed method could effectively eliminate the shadow of buildings. The commission error reduced from more than 40% to about 15%, and the Kappa coefficient was increased from 60 and 70% to over 80% for the two datacubes. This indicated that the proposed method can inhibit the shadow of buildings and does not have a regional dependence.