Precursory slope distress prior to the 2010 Mount Meager landslide,British Columbia

In 2010, the south flank of Mount Meager failed catastrophically, generating the largest (53 ± 3.8 × 10⁶ m³) landslide in Canadian history. We document the slow deformation of the edifice prior to failure using archival historic aerial photographs spanning the period 1948–2006. All photos were processed using Structure from Motion (SfM) photogrammetry. We used the SfM products to produce pre-and post-failure geomorphic maps that document changes in the volcanic edifice and Capricorn Glacier at its base. The photographic dataset shows that the Capricorn Glacier re-advanced from a retracted position in the 1980s then rapidly retreated in the lead-up to the 2010 failure. The dataset also documents 60 years of progressive development of faults, toe bulging, and precursory failures in 1998 and 2009. The 2010 collapse was conditioned by glacial retreat and triggered by hot summer weather that caused ice and snow to melt. Meltwater increased pore water pressures in colluvium and fractured rocks at the base of the slope, causing those materials to mobilize, which in turn triggered several secondary failures structurally controlled by lithology and faults. The landslide retrogressed from the base of the slope to near the peak of Mount Meager involving basement rock and the overlying volcanic sequence. Elsewhere on the flanks of Mount Meager, large fractures have developed in recently deglaciated areas, conditioning these slopes for future collapse. Potential failures in these areas have larger volumes than the 2010 landslide. Anticipated atmospheric warming over the next several decades will cause further loss of snow and glacier ice, likely producing additional slope instability. Satellite- and ground-based monitoring of these slopes can provide advanced warning of future landslides to help reduce risk in populated regions downstream.     

Cartographic Design and the Space–Time Cube

This paper reports on the results of an empirical evaluation that aimed to define the effectiveness and efficiency of different visual variables in depicting the Space–Time Cube’s (STC) content. Existing STC applications demonstrate that the most used visual variables are size and colour hue. Less is known, however, about their usability metrics. The research sets design criteria for STC contents, such as space–time paths, based on the cartographic design theory. The visual variables colour hue, colour value, colour saturation, size and orientation have been applied in two different use case studies. Besides, to support the three-dimensional visual environment, depth cues such as shading and transparency were considered too. User tests have been executed based on real-world problems with particular attention for the visualization strategy and data complexity. The outcomes revealed the most efficient and effective visual variables to represent data of various complexities in the STC.     

The AquaDEB project (phase I): Analysing the physiological flexibility of aquatic species and connecting physiological diversity to ecological and evolutionary processes by using Dynamic Energy Budgets

The European Research Project AquaDEB (2007–2011, http://www.ifremer.fr/aquadeb/) is joining skills and expertise of some French and Dutch research institutes and universities to analyse the physiological flexibility of aquatic organisms and to link it to ecological and evolutionary processes within a common theoretical framework for quantitative bioenergetics [Kooijman, S.A.L.M., 2000. Dynamic energy and mass budgets in biological systems. Cambridge University Press, Cambridge]. The main scientific objectives in AquaDEB are i) to study and compare the sensitivity of aquatic species (mainly molluscs and fish) to environmental variability of natural or human origin, and ii) to evaluate the related consequences at different biological levels (individual, population, ecosystem) and temporal scales (life cycle, population dynamics, evolution). At mid-term life, the AquaDEB collaboration has already yielded interesting results by quantifying bio-energetic processes of various aquatic species (e.g. molluscs, fish, crustaceans, algae) with a single mathematical framework. It has also allowed to federate scientists with different backgrounds, e.g. mathematics, microbiology, ecology, chemistry, and working in different fields, e.g. aquaculture, fisheries, ecology, agronomy, ecotoxicology, climate change. For the two coming years, the focus of the AquaDEB collaboration will be in priority: (i) to compare energetic and physiological strategies among species through the DEB parameter values and to identify the factors responsible for any differences in bioenergetics and physiology; and to compare dynamic (DEB) versus static (SEB) energy models to study the physiological performance of aquatic species; (ii) to consider different scenarios of environmental disruption (excess of nutrients, diffuse or massive pollution, exploitation by man, climate change) to forecast effects on growth, reproduction and survival of key species; (iii) to scale up the models for a few species from the individual level up to the level of evolutionary processes.     

Onshore sandbar migration at Tairua Beach (New Zealand): Numerical simulations and field measurements

We observed the onshore migration (3.5 m/day) of a nearshore sandbar at Tairua Beach, New Zealand during 4 days of low-energy wave conditions. The morphological observations, together with concurrent measurements of waves and suspended sediment concentrations, were used to test a coupled, wave-averaged, cross-shore model. Because of the coarse bed material and the relatively low-energy conditions, the contribution of the suspended transport to the total transport was predicted and observed to be negligible. The model predicted the bar to move onshore because of the feedback between near-bed wave skewness, bedload, and the sandbar under weakly to non-breaking conditions at high tide. The predicted bathymetric evolution contrasts, however, with the observations that the bar migrated onshore predominantly at low tide. Also, the model flattened the bar, while in the observations the sandbar retained its steep landward-facing flank. A comparison between available observations and numerical simulations suggests that onshore propagating surf zone bores in very shallow water (< 0.25 m) may have been responsible for most of the observed bar behaviour. These processes are missing from the applied model and, given that the observed conditions can be considered typical of very shallow sandbars, highlight a priority for further field study and model development. The possibility that the excess water transported by the bores across the bar was channelled alongshore to near-by rip-channels further implies that traditional cross-shore measures to judge the applicability of a cross-shore morphodynamic model may be misleading.     

The influence of 70 and 120 kHz tonal signals on the behavior of harbor porpoises (Phocoena phocoena) in a floating pen

Two harbor porpoises in a floating pen were subjected to five pure tone underwater signals of 70 or 120kHz with different signal durations, amplitudes and duty cycles (% of time sound is produced). Some signals were continuous, others were intermittent (duty cycles varied between 8% and 100%). The effect of each signal was judged by comparing the animals' surfacing locations and number of surfacings (i.e. number of respirations) during test periods with those during baseline periods. In all cases, both porpoises moved away from the sound source, but the effect of the signals on respiration rates was negligible. Pulsed 70kHz signals with a source level (SL) of 137dB had a similar effect as a continuous 70kHz signal with an SL of 148dB (re 1muPa, rms). Also, a pulsed 70kHz signal with an SL of 147dB had a much stronger deterring effect than a continuous 70kHz signal with a similar SL. For pulsed 70kHz signals (2s pulse duration, 4s pulse interval, SL 147dB re 1muPa, rms), the avoidance threshold sound pressure level (SPL), in the context of the present study, was estimated to be around 130dB (re 1muPa, rms) for porpoise 064 and around 124dB (re 1muPa, rms) for porpoise 047. This study shows that ultrasonic pingers (70kHz) can deter harbor porpoises. Such ultrasonic pingers have the advantage that they do not have a "dinner bell" effect on pinnipeds, and probably have no, or less, effect on other marine fauna, which are often sensitive to low frequency sounds.     

Effective fetch and non-linear four-wave interactions during wave growth in slanting fetch conditions

Wave growth in slanting fetch (with wind blowing obliquely off a coast) is investigated with 7 years worth of routine wave measurements in Lake IJssel in The Netherlands and with the SWAN wave model. Two aspects are considered in particular for this case: the validity of the concept of effective fetch and the role of the non-linear four-wave interactions. For slanting and parallel fetch conditions, we found some significant deviations from the effective fetch assumption, leading to 20–35% mismatch in either the peak period T_p or the significant wave height H_m0 respectively. However, the effect of discrepancies between various widely accepted wave growth formulas turned out to be even more important. The wave directions during slanting fetch are significantly ‘steered’ by the coastline, especially in the first kilometre(s) off the coast. The role of the non-linear four-wave interactions is investigated by running the SWAN (version 40.41) wave model with three different quadruplet formulations. Exact quadruplet methods (Xnl) yielded relatively strong wave steering, despite the four-wave interactions being relatively weak. Application of Xnl did not lead to better overall agreement with measurements — improvements for the mean wave period T_m01 were offset by some deterioration for the wave height H_m0.     

Extension of a qualitative model on nutrient cycling and transformation to include microtidal estuaries on wave-dominated coasts: Southern hemisphere perspective

Estuaries are dynamic transition zones acting as filters and transformers of nutrients passing from catchments to the sea. We propose an extension to an existing southern hemisphere model on nutrient dynamics in estuaries to include the relatively constricted, microtidal estuaries located along wave-dominated coasts in the region, specifically focusing on the limiting macronutrients nitrogen (N) and phosphorus (P) and on key processes, including physical (e.g. flushing, mixing and sedimentation), geochemical (e.g. flocculation), biochemical (e.g. remineralisation) and biological (e.g. primary production) processes. A simplified model of the physical states (primarily controlled by hydrological characteristics) is used as the basis for the qualitative model, where these are defined in terms of characteristic salinity-induced stratification of the water column, flushing time and the mouth condition. Four physical states are identified: a freshwater-dominated state, freshwater pulsed/recovery state, marine-dominated state and the closed mouth state. The states and their physical characteristics largely resemble that of the earlier model, except that the extended model reflects the dynamics of restricted inlets and introduces the closed mouth state. This model specifically explores the variation within southern African estuarine systems to better inform research and management programmes on the appropriate trophic, temporal and spatial scales at which uncertainties in ecosystem functioning need resolving. It can also be applied to other regions in the southern hemisphere, and even the northern hemisphere, with similar hydrological and estuarine geomorphological characteristics (e.g. the Mediterranean coast, the west coasts of North and South America, and the south-west and south-eastern coasts of Australia).