Regional Variability in Occurrence and Distribution of Polymetallic Nodules in the Central Indian Basin

Regional scale morphological studies on different-sized polymetallic nodules from the Central Indian Basin show that only 2–5 cm sized nodules have highest occurrence per station (92–94% along latitudes; 88–94% along longitudes). A nodule size shows an inverse relationship with the nodule distribution, grade, and abundance. Interestingly, only 3–4 and 4–5 cm sized nodules have highest grade, abundance, and distribution percentages along longitudes in P₁, first generation mine site and relinquished area, which further implies that the nodule mining along the longitude would be beneficial. Different-sized nodule groups suggest their formation under variable environmental conditions that existed in the Central Indian Basin. The coexistence of different-sized nodules suggests different environmental conditions existed in the Central Indian Basin.     

Assessment of Indian summer monsoon simulation by Community Atmosphere Model (CAM3)

Seasonal prediction of Indian Summer Monsoon (ISM) has been attempted for the current year 2011 using Community Atmosphere Model (CAM) developed at the National Centre for Atmospheric Research (NCAR). First, 30?years of model climatology starting from 1981 to 2010 has been generated to capture the variability of ISM over the Indian region using 30 seasonal simulations. The simulated model climatology has been validated with different sets of observed climatology, and it was observed that the simulated climatological rainfall is affected by model bias. Subsequently, a bias correction procedure using the Tropical Rainfall Measuring Mission (TRMM) 3B43 rainfall has been proposed. The bias-corrected rainfall climatology shows both spatial and temporal variability of ISM satisfactorily. Further, four sets of 10-member ensemble simulations of ISM 2009 and 2010 have been performed in hindcast mode using observed sea surface temperature (SST) and persistence of April SST anomaly, and it has been found that the bias-corrected model rainfall captures the seasonal variability of ISM reasonably well with some discrepancies in these two contrasting monsoon years. With this positive background, the seasonal prediction of ISM 2011 has been carried out in forecast mode with the assumption of persistence of May SST anomaly from June through September 2011. The model assessment shows an 11% deficiency in All-India Rainfall (AIR) of ISM 2011. In particular, the monthly accumulated rains are predicted to be 101% (17.6?cm), 86% (24.3?cm), 83% (21.0?cm) and 95% (15.5?cm) of normal AIR for the months of June, July, August and September, respectively.     

Physical and biological response of the Arabian Sea to tropical cyclone Phyan and its implications

The response to the tropical cyclone Phyan, which developed in the eastern Arabian Sea during 9-11 November 2009, was rapid cooling of sea surface temperature (SST), enhancement of chlorophyll a and two-fold increase in net primary productivity (NPP). Cooling of SST was immediate in response to the strong wind-mixing, and the subsequent upward Ekman pumping sustained the cooling even after the dissipation of Phyan. The biological response mediated by the upward Ekman pumping driven vertical transport of subsurface nutrient showed a time lag of 3-4 days. The CO? flux to the atmosphere associated with Phyan was 0.123 Tg C, which accounted for ~85% of the total out-gassing from the eastern Arabian Sea during November. Thus, an increased occurrence of cyclones in a warming environment will lead to an enhanced biomass production and also increase in CO? out-gassing.     

Debris flow susceptibility zonation using statistical models in parts of Northwest Indian Himalayas—implementation,validation, and comparative evaluation

Natural Hazards - Debris flows are natural disasters with devastating consequences and frequent recurrence in changing climatic regime of the Indian Himalayas. Therefore, it is necessary to...     

Measurement and modeling of bed shear stress under solitary waves

Direct measurements of bed shear stresses (using a shear cell apparatus) generated by non-breaking solitary waves are presented. The measurements were carried out over a smooth bed in laminar and transitional flow regimes (~ 10⁴ < R_e < ~ 10⁵). Measurements were carried out where the wave height to water depth (h/d) ratio varied between 0.12 and 0.68; maximum near bed velocity varied between 0.16 m/s and 0.51 m/s and the maximum total shear stress (sum of skin shear stress and Froude–Krylov force) varied between 0.386 Pa and 2.06 Pa. The total stress is important in determining the stability of submarine sediment and in sheet flow regimes. Analytical modeling was carried out to predict total and skin shear stresses using convolution integration methods forced with the free stream velocity and incorporating a range of eddy viscosity models. Wave friction factors were estimated from skin shear stress at different instances over the wave (viz., time of maximum positive total shear stress, maximum skin shear stress and at the time of maximum velocity) using both the maximum velocity and the instantaneous velocity at that phase of the wave cycle. Similarly, force coefficients obtained from total stress were estimated at time of maximum positive and negative total stress and at maximum velocity. Maximum positive total shear stress was approximately 1.5 times larger than minimum negative total stress. Modeled and measured positive bed shear stresses are well correlated using the best convolution model, but the model underestimates the data by about 4%. Friction factors are dependent on the choice of normalizing using the maximum velocity, as is conventional, or the instantaneous velocity. These differ because the stress is not in phase with the velocity in general. Friction factors are consistent with previous data for monochromatic waves, and vary inversely with the square-root of the Reynolds number. The total shear stress leads the free stream fluid velocity by approximately 50°, whereas the skin friction shear stress leads by about 30°, which is similar to that reported by earlier researchers.     

Unified numerical study of shallow foundation on structured soft clay under unconsolidated and consolidated-undrained loadings

Abstract

Based on a new elasto-plastic constitutive model, this paper presents a soil–water coupled numerical prediction of the bearing capacity for shallow foundation constructed on Ballina soft clay for unconsolidated undrained (UU) and consolidated undrained (CU) conditions. This elasto-plastic constitutive Shanghai model has an advantage of describing the mechanical behaviour of over-consolidated and structured soil under different loading and drainage conditions, by using one set of material parameter. In this paper, the Shanghai model used for both UU and CU conditions has the same initial parameters obtained from laboratory test results. The loading conditions and consolidation stages vary based on construction details. The predicted bearing pressure-settlement responses for UU and CU, approves the field observation. The phenomenon of gaining the bearing capacity due to consolidation is captured and explained by the use of soil–water coupled numerical analysis with a new elasto-plastic model. The stress strain behaviour, stress paths and the decay of the structure of elements at different depths presented in this study, reveal the mechanism for the difference between UU and CU conditions to understand the foundation behaviour. Effect of the initial degree of soil structure on the bearing capacity is also addressed. Overall, this approach provides the integrated solution for the shallow foundation design problems under short and long-term loadings.     

On the application of similitude to installation operations of offshore steel jackets

The role of similitude in scaled simulation of major installation operations of offshore steel jackets, namely, loadout, launching and upending has been studied. The physical modelling can be looked upon both as an adjunct to numerical modelling using computers and also as an independent tool of investigation. The problems of design of models and of experiments are discussed and the prediction equations based on similitude are given.     

Analysis on the effect of salinity in underwater wireless optical communication

Abstract

This article deals with the effect of salinity variation on underwater wireless optical communication (UWOC). Effect of different concentration of salt on underwater optical communication has been carried out experimentally in terms of received power at different link lengths. Based on the analysis of experimental data, a mathematical model has been proposed to describe the saline water channel. A simulation study is performed for different data rates and link lengths. It is seen that with increased salinity the attenuation is higher and the UWOC system performance degrades with higher data rate and increased link length.     

Rock magnetic records of the sediments of the eastern Arabian Sea: Evidence for late Quaternary climatic change

Rock-magnetic measurements along with grain size, acid-insoluble residue (AIR), organic carbon (OC), CaCO₃ and δ¹⁸O of the planktonic foraminifers of the sediments were determined for 15 gravity cores recovered from the western continental margin of India. Magnetic susceptibility (MS) values in the surficial sediments reflect the land-derived input and, in general, are the highest in terrigenous sediment-dominated sections of the cores off Saurashtra–Ratnagiri, followed by the sediments off Indus–Gulf of Kachchh and then Mangalore–Cape Comorin.

The down-core variations in mineral magnetic parameters reveal that the glacial sediments off the Indus are characterized by low MS values/S-ratios associated with high AIR-content, low OC/CaCO₃ contents and relatively high δ¹⁸O values, while those off SW India are characterized by low MS values/high S-ratio% associated with low AIR content, and relatively high OC, CaCO₃ and δ¹⁸O values. Conversely, the Early Holocene sediments of all cores are characterized by high MS values/S-ratio% associated with high AIR content, low OC, CaCO₃ contents and gradually decreased δ¹⁸O values. These results imply that during the Last Glacial Maximum (LGM), the cores off northwestern India received abundant continental supply leading to the predominance of eolian/fluvial sedimentation. In the SW region the influence of hinterland flux is less evident during this period, but convective mixing associated with the NE monsoon resulted in increased productivity. During the early Holocene intense SW monsoon conditions resulted in high precipitation on land, which in turn contributed increased AIR content/MS values in the continental margin sediments. A shallow water core off Kochi further suggests that the intense SW monsoon conditions prevailed until about 5 ka. The late Holocene organic-rich sediments of the SW margin of India were, however, subjected to early diagenesis at different intervals in the cores. Therefore, caution is needed when interpreting regional climatic change from down-core changes in sediment magnetic properties.