The MJO and global warming: a study in CCSM4

The change in Madden–Julian oscillation (MJO) amplitude and variance in response to anthropogenic climate change is assessed in the 1° nominal resolution community climate system model, version 4 (CCSM4), which has a reasonable representation of the MJO characteristics both dynamically and statistically. The twentieth century CCSM4 run is compared with the warmest twenty-first century projection (representative concentration pathway 8.5, or RCP8.5). The last 20 years of each simulation are compared in their MJO characteristics, including spatial variance distributions of winds, precipitation and outgoing longwave radiation, histograms of event amplitude, phase and duration, and composite maps of phases. The RCP8.5 run exhibits increased variance in intraseasonal precipitation, larger-amplitude MJO events, stronger MJO rainfall in the central and eastern tropical Pacific, and a greater frequency of MJO occurrence for phases corresponding to enhanced rainfall in the Indian Ocean sector. These features are consistent with the concept of an increased magnitude for the hydrological cycle under greenhouse warming conditions. Conversely, the number of active MJO days decreases and fewer weak MJO events occur in the future climate state. These results motivate further study of these changes since tropical rainfall variability plays such an important role in the region’s socio-economic well being.     

Microwave D-InSAR technique for assessment of land subsidence in Kolkata city,India

An effective microwave Differential Interferometric Synthetic Aperture Radar (D-InSAR) technique was used to rapidly assess the potential land subsidence with high precision by exploiting the phase difference of two temporally separated SAR data in the region of Kolkata city, India. The objective of this study is to assess land subsidence using D-InSAR technique and to delineate the regions of land subsidence caused by over exploitation of groundwater by minimising the errors by applying topographic and atmospheric corrections. The study area forms a part of Indo-Gangetic plain. Three ENVISAT Advanced Synthetic Aperture Radar ?(ASAR) images of the years 2003, 2007 and 2010 were acquired to study the temporal evolution of land subsidence in the study area. The phase changes due to topography in the interferograms were removed by using Shuttle Radar Topography Mission (SRTM) degital elevation model data. Medium Spectral Resolution Imaging Spectrometer (MERIS) data were applied to remove the atmospheric noise in the interferogram. The deformation fringes were observed in the northern and central part of the study area where the land subsidence was 12 and 18 mm during the years of 2003–2007 and 2007–2010. The regional variation in the piezometric head compares well with the fringes of the interferogram. This confirms over extraction of groundwater is the main cause for land subsidence in this region. Hence, it is necessary to reduce groundwater pumping and to augment rainfall recharge in northern part of the study area.     

Brazilian Solar Spectroscope (bss)

Digital, decimetric (200–2500 MHz) Brazilian Solar Spectroscope (BSS) with high time (10–1000 ms) and frequency (1–10 MHz) resolution is in regular operation since April, 1998, at National Space Research Institute (INPE) at São José dos Campos, Brazil. BSS operates in conjunction with a 9-m diameter polar mounted antenna. It allows to select suitable observing frequency range, frequency and time resolutions and data can be digitized up to 100 channels. BSS has capabilities of quasi-real time display of the ongoing dynamic spectra of the solar activity that enables the observer to modify observational parameters so as to suit a specific type of activity such as spikes and improve the quality of data acquisition and storage. Minimum detectable flux density of the spectroscope, for different combinations of the observational parameters, is 3 s.f.u. Observations are carried out routinely from 11 UT to 19 UT. Necessary software for data acquisition and reductions has been developed in IDL 5.3 environment. Data are available in FITS and ASCII formats. Absolute timing accuracy of the station is less than 3 ms. Here, we present examples of the bursts which have been recorded by BSS and available display facilities.     

Eclipse Observations of Compact Sources in the Outer Solar Corona

We report here on high angular resolution observations of solar noise storm sources at a frequency of 75 MHz. The data for the study were obtained at the Gauribidanur Radio Observatory (long.: 77°2612 E, lat.: 13°3612 N) about 100 km north of Bangalore, India, during the solar eclipse of 24 October 1995. Our main conclusion is that there are structures of angular size 2.5 arc min in the outer solar corona.     

Geochemical fractionation of heavy metals in Chilka Lake (east coast of India)—a tropical coastal lagoon

Chilka lake, the largest coastal lagoon of Asia is one of the most dynamic ecosystems along the Indian coast. Historically the lagoon has undergone a considerable reduction in surface area due, in part, to input from natural processes but mostly due to human activities. The purpose of this investigation is to document the heavy metals' affinity for specific geochemical phases in the recently deposited sediments in the lagoon. Thirty-three samples were collected and analyzed for different geochemical phases of Fe, Mn, Cu, Cr, Ni, Pb, and Zn utilizing a sequential extraction scheme. In the nonlithogenous fraction, the exchangeable fraction was not geochemically significant, having <2% of the total metal concentration for all the elements. However, the carbonate fraction contained the following percentages of the total concentration: <1% Fe, 13% Mn, 6% Cu, 4% Cr, 8% Ni, 13% Pb, and 12% Zn, suggesting the detrital origin of the sediments. Reducible and organic matter-bound fractions were the significant phases in the nonlithogenous fraction, containing 9% Fe, 16% Mn, 15% Cu, 16% Cr, 16% Ni, 14% Pb, and 14% Zn in the former and 4% Fe, 3% Mn, 17% Cu, 3% Cr, 14% Ni, 15% Pb, and 14% Zn in the latter. The phenomenon has been attributed to the scavenging affinity of Fe-Mn oxides and affinity for sorption into organic matter of the lagoon sediments. The lithogenous, residual fraction generally considered as a guide for natural background values was determined to contain 87% Fe, 67% Mn, 61% Cu, 77% Cr, 61.3% Ni, 56% Pb, and 60% Zn of the total concentrations.     

Mass movement studies in Kosi catchment,mepal — A semi quantitative approach using aerial photographs

An area of about 5000 sq. km. in the upper parts of river basin of Sun Kosi falling in Nepal has been studied using medium and small scale aerial photographs of two different dates. The temporal variations in relation to mass movements that occur in the study area have been demarcated. The areas which have undergone increased erosion by slope failure and gully erosion over a period of 22 years are evaluated. An attempt has been made to quantify the increase in area of mass movement taking the advantage of three dimensional model of terrain as seen in the aerial photos.     

Geochemistry and petrogenesis of lamproites,late cretaceous age,Woodson County,Kansas, U.S.A.

Lamproite sills and their associated sedimentary and contact metamorphic rocks from Woodson County, Kansas have been analyzed for major elements, selected trace elements, and strontium isotopic composition. These lamproites, like lamproites elsewhere, are alkalic (molecular $\text{K}{}_2\text{O + Na}{}_2\text{O}\text{Al}{}_2\text{O}{}_3\text{= 1.6–2.6}$), are ultrapotassic $\text{(}\text{K}{}_2\text{O}\text{Na}{}_2\text{O}\text{= 9.6–150)}$, are enriched in incompatible elements (LREE or light rare-earth elements, Ba, Th, Hf, Ta, Sr, Rb), and have moderate to high initial strontium isotopic compositions (0.7042 and 0.7102). The silica-saturated magma (olivine-hypersthene normative) of the Silver City lamproite could have formed by about 2 percent melting of a phlogopite-garnet lherzolite under high $\text{H}{}_2\text{O}\text{CO}{}_2$ ratios in which the Iherzolite was enriched before melting in the incompatible elements by metasomatism. The Rose Dome lamproite probably formed in a similar fashion although the extreme alteration due to addition of carbonate presumably from the underlying limestone makes its origin less certain. Significant fractional crystallization of phases that occur as phenocrysts (diopside, olivine, K-richterite, and phlogopite) in the Silver City magma and that concentrate Co, Cr, and Sc are precluded as the magma moved from the source toward the surface due to the high abundances of Co, Cr, and Sc in the magma similar to that predicted by direct melting of the metasomatized Iherzolite.Ba and, to a lesser extent, K and Rb and have been transported from the intrusions at shallow depth into the surrounding contact metamorphic zone. The Silver City lamproite has vertical fractionation of some elements due either to volatile transport or to variations in the abundance of phenocrysts relative to groundmass most probably due to flow differentiation although multiple injection or fractional crystallization cannot be conclusively rejected.     

The P3 kimberlite and P4 lamproite,Wajrakarur kimberlite field,India: mineralogy,and major and minor element compositions of olivines as records of their phenocrystic vs xenocrystic origin

Distinctly different groundmass mineralogy characterise the hypabyssal facies, Mesoproterozoic diamondiferous P3 and P4 intrusions from the Wajrakarur Kimberlite Field, southern India. P3 is an archetypal kimberlite with macrocrysts of olivine and phlogopite set in a groundmass dominated by phlogopite and monticellite with subordinate amounts of serpentine, spinel, perovskite, apatite, calcite and rare baddeleyite. P4 contains mega- and macrocrysts of olivine set in a groundmass dominated by clinopyroxene and phlogopite with subordinate amounts of serpentine, spinel, perovskite, apatite, and occasional gittinsite, and is mineralogically interpreted as an olivine lamproite. Three distinct populations of olivine, phlogopite and clinopyroxene are recognized based on their microtextural and compositional characteristics. The first population includes glimmerite and phlogopite–clinopyroxene nodules, and Mg-rich olivine macrocrysts (Fo 90–93) which are interpreted to be derived from disaggregated mantle xenoliths. The second population comprises macrocrysts of phlogopite and Fe-rich olivine (Fo 81–89) from P3, megacrysts and macrocrysts of Fe-rich olivine (Fo 85–87) from P4 and a rare olivine–clinopyroxene nodule from P4 which are suggested to have a genetic link with the precursor melt of the respective intrusions. The third population represents clearly magmatic minerals such as euhedral phenocrysts of Fe-rich olivine (Fo 85–90) crystallised at mantle depths, and olivine overgrowth rims formed contemporaneously with groundmass minerals at crustal levels. Close spatial association and contemporaneous emplacement of P3 kimberlite and P4 lamproite is explained by a unifying petrogenetic model which involves the interaction of a silica-poor carbonatite melt with differently metasomatised wall rocks in the lithospheric mantle. It is proposed that the metasomatised wall rock for lamproite contained abundant MARID-type and phlogopite-rich metasomatic veins, while that for kimberlite was relatively refractory in nature.

     

Characterization of seasonal local recharge using electrical resistivity tomography and magnetic resonance sounding

A groundwater recharge process of heterogeneous hard rock aquifer in the Moole Hole experimental watershed, south India, is being studied to understand the groundwater flow behaviour. Significant seasonal variations in groundwater level are observed in boreholes located at the outlet area indicating that the recharge process is probably taking place below intermittent streams. In order to localize groundwater recharge zones and to optimize implementation of boreholes, a geophysical survey was carried out during and after the 2004 monsoon across the outlet zone. Magnetic resonance soundings (MRS) have been performed to characterize the aquifer and measure groundwater level depletion. The results of MRS are consistent with the observation in boreholes, but it suffers from degraded lateral resolution. A better resolution of the regolith/bedrock interface is achieved using electrical resistivity tomography (ERT). ERT results are confirmed by resistivity logging in the boreholes. ERT surveys have been carried out twice—before and during the monsoon—across the stream area. The major feature of recharge is revealed below the stream with a decrease by 80% of the calculated resistivity. The time‐lapse ERT also shows unexpected variations at a depth of 20 m below the slopes that could have been interpreted as a consequence of a deep seasonal water flow. However, in this area time‐lapse ERT does not match with borehole data. Numerical modelling shows that in the presence of a shallow water infiltration, an inversion artefact may take place thus limiting the reliability of time‐lapse ERT. A combination of ERT with MRS provides valuable information on structure and aquifer properties respectively, giving a clue for a conceptual model of the recharge process: infiltration takes place in the conductive fractured‐fissured part of the bedrock underlying the stream and clayey material present on both sides slows down its lateral dissipation. Copyright © 2007 John Wiley & Sons, Ltd.     

Fabrication of Nanoparticle-Doped Polyvinyl Alcohol-Cellulose Acetate Membrane and Characterization of the Surface Enhancement

In the present study, nanocomposite polymeric membranes are fabricated using polyvinyl alcohol (PVA), cellulose acetate (CA) as polymers, and dimethyl sulfoxide (DMSO) as the solvent. To enhance the performance of the membrane, nanoparticles like TiO₂, CaO, CdO, and ZrO are added to the polymeric solution and the doped polymeric solution is cast on a glass plate. Nine combinations of membranes are fabricated with two different concentrations (0.1% and 0.2%) of nanoparticles. The basic properties of the membranes such as density, porosity, viscosity, permeability, pure water flux, and water content are studied for the samples. Membrane pore structure and surface properties are identified and it is found that doping nanoparticles on the surface of membranes improve mechanical strength, stability, pore size, etc., allowing the membranes to perform better in extreme industrial-level effluent treatment applications. High-resolution scanning electron microscopy (SEM) shows the homogeneous dispersion of ZrO, TiO₂, CaO, and CdO nanoparticles on the surface of the PVA-CA membrane. The doping of nanoparticles on the PVA-CA membrane results in improved mechanical strength and good chemical oxidation stability. In comparison, the PCD-TiO₂ sample shows high thermal stability and oxidation stability at high temperatures until 200°C, which has a high potential for treating industrial effluents.