The seismic hazard assessment of the Dead Sea rift, Jordan

The Dead Sea fault system and its branching faults represent one of the most tectonically active regions in the Middle East. The aim of this study is to highlight the degree of hazards related to the earthquake activities associated with the Dead Sea rift, in terms of speculating the possible future earthquakes. The present investigation mainly is based on available data and vertical crustal modeling of Jordan and the Dead Sea model for the Dead Sea basin with particular emphasis of the recent earthquake activities, which occurred on December 31st, 2003 (Mc = 3.7), February 11th, 2004 (strongest Mc = 4.9 R), and March 15th, 2004 (Mc = 4). The present research examines the location of the strong events and correlates them with the various tectonic elements in the area. The source mechanism of the main shock and the aftershock events is also examined. The analyses were based on the available short period seismogram data, which was recorded at the Natural Resources Authority of Jordan, Seismological Observatory. The seismic energy appears to have migrated from the south to the north during the period from December 31st up to March 12th, where the released seismic energy showed a migration character to the southern block of the eastern side of the Dead Sea, which led the seismic event to occur on March 15th.     

Tin mineralization in the Dajing tin–polymetallic deposit, Inner Mongolia, China

Dajing is a large-scale tin–polymetallic deposit that hosts the largest tin mine in North China. It is a hydrothermal vein-type deposit containing Sn, Cu, Pb, Zn, Ag, and minor components Co and In. The deposit consists of more than 690 veins hosted within Upper Permian sedimentary rocks.Three mineralization stages and six ore types are recognized with cassiterite constituting the dominant tin mineral. The SnO₂ content of cassiterite increases in the sequence of mineralization stages shear-deformation→cassiterite–quartz→cassiterite–sulfide (or chalcopyrite–pyrite) stage, while the content of FeO, TiO₂, Nb₂O₅, Ta₂O₅, and In₂O₅ tends to decrease with increases in NiO and Ga₂O₅. It is considered that the negative correlation between SnO₂ and FeO, Nb₂O₅, Ta₂O₅, and In₂O₅ results from elemental substitutions. The early stage cassiterite is much richer in Ta and the later stage cassiterite is much poorer in Ti and Fe than is usual in hydrothermal vein type tin deposits. This is interpreted to indicate that the component of early stage cassiterite reflects a granitic magma source while the composition of later stage cassiterite has a more obvious strata source. The compositional variation of cassiterite corresponds to decreasing crystallization temperatures within each stage and between sequential stages with time. The characteristics of REE in cassiterite from two stages are in accord with that of subvolcanic rocks and the Linxi formation. It suggests that tin transported during the cassiterite–quartz stage may have originated from subvolcanic dikes (e.g., dacite porphyry), while in the cassiterite–sulfide stage, tin may have been derived from wallrock (e.g. siltstone) of the Upper Permian-age Linxi Formation.     

Giant swarms of Precambrian mafic dikes and potential diamond resources of ancient platforms

By the examples of the Siberian Platform and Canadian Shield, it is shown that spatial juxtaposition of Phanerozoic diamond-bearing kimberlite fields with giant swarms of Precambrian mafic dikes is caused by both systematic and incidental events. The first of these include (1) origination of mantle plumes and associated lenses of high-temperature mantle melting in the subequatorial “hot belt” of the early Earth, (2) formation of magma chambers that generated mafic dikes in these asthenospheric lenses, (3) shear stress, and (4) ultrahigh-pressure metamorphism of igneous and country rocks. As a result, the association of diamond-bearing high-density mafic and ultramafic rocks was formed under favorable thermal and fluidal conditions. These processes occurred first in the embryonic (multiplate) Neoarchean tectonic setting at a depth of 40–60 km (present-day elevation marks) and then at a deeper (100–150 km) level during the transition to the Proterozoic true plate tectonics. These processes left behind giant swarms of Precambrian mafic dikes, as well as structurally and genetically related deep-seated morphological and density anomalies. The relatively high position of two lithospheric units of diamond-bearing rocks, each underlain by a thick layer of the cold mantle, prevented these units from thermal and mechanical erosion during subsequent plate-tectonic stages characterized by deeper location of asthenospheric layers. The occurrence of clusters of Phanerozoic diatremes in ancient giant swarms of mafic dikes, as well as the enrichment of pipes in xenogenic diamond-bearing material derived from different levels of the tectonically delaminated lithosphere, may be attributed to incidental events that controlled the fertility of a relatively small number of kimberlite pipes.     

Secular variations of the upper crust composition: Implication of geochemical data on the Upper Precambrian shales from the Southern Urals western flank and Uchur-Maya region

In the mid-1980s, it was concluded based on geochemical study that Th, Sc, La concentrations and ratios Th/Sc, La/Sc and Eu/Eu* did not wary significantly in the post-Archean time. It was impossible to judge about compositional variations of upper crust during the Riphean and Vendian, because data of that time characterized a limited number of samples from the post-Archean basins of Australia, New Zealand, and Antarctic. Considered in this work are variations of Eu/Eu*, LREE/HREE, Th/Sc, and La/Sc ratios in Upper Precambrian fine-grained siliciclastic rock of the Southern Urals western flank (Bashkirian meganticlinorium) and Uchur-Maya region (Uchur-Maya plate and Yudoma-Maya belt). As is established, only the Eu anomaly in the studied siliciclastic rocks is practically identical to this parameter of the average post-Archean shale. Three other parameters plot on the Riphean-Vendian variation curves with positive and negative excursions of diverse magnitude, which do not coincide always in time. It is assumed that these excursions likely mark stages of local geodynamic activity, destruction of pre-Riphean cratons, and progressing recycling of sedimentary material during the Riphean.     

Glacial Erosion in the Abisko Mountains: Kärkevagge and Vassivagge, Northern Sweden

This paper discusses direct current resistivity soundings and geomorphological studies of Quaternary deposits in two glacial troughs in the Abisko Mountains of northern Sweden. The subject of the fieldwork is the depth of Pleistocene glacial erosion. Studies were carried out in 1998 and 2003 in the Kärkevagge and Vassivagge. The estimated thickness of Quaternary deposits and bedrock properties are discussed in the broader context of glacial erosion studies in the Abisko area. Geophysical and geomorphological studies suggest that the depth of glacial erosion was highly differentiated from –190 m in the Torneträsk basin to the metric overall erosion on the upland plateau. In medium‐sized valleys several kilometres long, erosion depth measures 30–50 m. Present‐day stream channel patterns reveal a strong relation to the bedrock configuration in valley floors     

Dissolved trace elements in river water: spatial distribution and the influencing factor, a study for the Pearl River Delta Economic Zone, China

Twenty-nine water samples were collected from different river channels of the Pearl River Delta Economic Zone, China. An inductively coupled plasma-mass spectromonitor (ICP-MS) was used to measure concentrations of the trace elements in these samples. The results suggest that the average concentrations of rare earth elements in river water show an increasing trend from the West River, the North River, the rivers of the Pearl River Delta, and the Shenzhen River to the East River. Relatively high concentrations of heavy metals appear in the East River, the rivers of the Pearl River Delta and the Shenzhen River, while the West River and the North River have relatively low heavy metal concentrations. Trace element concentrations in samples collected near urban or industrial areas are much higher than those of samples collected from distant areas, away from urban and industrial areas. After natural conditions, human activities have significant influence on the trace element concentrations in river water. This trace element concentration’s spatial distribution in the river water from the Pearl River Delta Economic Zone is actually an integrated effect of natural conditions and human activity.     

Formation of iron-containing colloids by the weathering of phyllite

The formation of colloids during the weathering of phyllite was investigated by exposing ground phyllite to Milli-Q water. Secondary mineral colloids of 10¹–10² nm were detected in significant concentrations. At pH of about 8.5, the solution concentration of these colloids reached up to 10 mg/L (however, acidification to pH 4.0 prevented the formation of the colloids). The mineralogical composition of the secondary mineral colloids is assumed to be a mixture of ferrihydrite, manganese oxyhydroxides, aluminosilicates, amorphous Al(OH)₃ and gibbsite with possible additions of iron silicates and␣iron-alumino silicates. The colloids were stable over longer periods of time (at least several weeks), even in the presence of suspended ground rock. Direct formation of iron-containing secondary mineral colloids at the rock–water interface by the weathering of rock material is an alternative to the well-known mechanism of iron colloid formation in the bulk of water bodies by mixing of different waters or by aeration of anoxic waters. This direct mechanism is of relevance for colloid production during the weathering of freshly crushed rock in the unsaturated zone as for instance crushed rock in mine waste rock piles. Colloids produced by this mechanism, too, can influence the transport of contaminants such as actinides because these colloids have a large specific surface area and a high sorption affinity.