The British Tertiary igneous province: palaeomagnetism of the Arran dykes

Summary. Five hundred and sixteen sites in Arran were sampled. After cleaning by heating and/or alternating fields 87 per cent yielded directions with α₉₅ < 10°, comprising 435 dykes, 12 sills and one granite; polarities could be determined for some of the remainder. Directions are thought to be primary and on average are shallower than corresponds to the mean centred axial dipole, with many shallow reversely-magnetized dykes present.
Seventeen per cent of the dykes are normally magnetized, 5 per cent have intermediate directions. Polarity does not correlate with petrography, thickness or trend, but does depend upon location. In particular, on the NE coast up to 70 per cent are normal, and possibly belong to a different swarm.
Normal polarities were found for both sites in the Northern Granite, for Holy Island and for some of the sills. In conjunction with the known stratigraphy this shows that the rocks were formed during an R-N-R sequence of polarities, or more probably R-N-R-N. Using the radiometric age of 58 Ma for the Northern Granite and the best estimate of the polarity time-scale the duration of activity was probably in the range 0.5 to 3.4 Ma if three polarity periods were involved, and 3.4 to 4.4 Ma if four were involved.     

Phosphorus in granitic rocks of Colombia

One hundred and three samples of granitic rock taken systematically from the Andean part of Colombia reveal that the observed variation in phosphorus content reflects the variation observed for the wholerock chemical composition. This relationship was established using a form of trend analysis termed COMTRENA and information-theory statistics.     

Paleolimnological investigations of anthropogenic environmental change in Lake Tanganyika: I. An introduction to the project

We investigated paleolimnological records from a series of river deltas around the northeastern rim of Lake Tanganyika, East Africa (Tanzania and Burundi) in order to understand the history of anthropogenic activity in the lakes catchment over the last several centuries, and to determine the impact of these activities on the biodiversity of littoral and sublittoral lake communities. Sediment pollution caused by increased rates of soil erosion in deforested watersheds has caused significant changes in aquatic communities along much of the lakes shoreline. We analyzed the effects of sediment discharge on biodiversity around six deltas or delta complexes on the east coast of Lake Tanganyika: the Lubulungu River delta, Kabesi River delta, Nyasanga/Kahama River deltas, and Mwamgongo River delta in Tanzania; and the Nyamuseni River delta and Karonge/Kirasa River deltas in Burundi. Collectively, these deltas and their associated rivers were chosen to represent a spectrum of drainage-basin sizes and disturbance levels. By comparing deltas that are similar in watershed attributes (other than disturbance levels), our goal was to explore a series of historical experiments at the watershed scale, with which we could more clearly evaluate hypotheses of land use or other effects on nearshore ecosystems. Here we discuss these deltas, their geologic and physiographic characteristics, and the field procedures used for coring and sampling the deltas, and various indicators of anthropogenic impact.     

The use of sedimentary algal pigments to infer historic algal communities in Lake Apopka,Florida

The primary producer community of Lake Apopka, a large (125 km²), shallow (mean depth, 1.7 m), polymictic Florida lake, shifted from macrophyte dominance to phytoplankton dominance in the 1940s. Today, frequent wind resuspension of highly organic, unconsolidated sediments supports a meroplanktonic community that is predominantly diatoms, but during calm periods the algal community is dominated by planktonic cyanobacteria. Sedimentary algal pigments (chlorophyll derivatives and carotenoids) and chemical proxies for nutrient enrichment (polyphosphate, total phosphorus and biogenic silica) in three sediment cores were used to investigate historic changes in primary producers. Sediments were separated into three stratigraphic zones using multivariate statistical techniques. Stratigraphic zonation was established in each core although sediment deposition at one site was insufficient to adequately resolve temporal changes. These results show the importance of selecting suitable sites for paleolimnological studies. The oldest zone represents macrophyte-derived sediments, and the two overlying zones represent phytoplankton-derived sediments deposited since the 1940s. Algal pigments in the most recent sediment zone show little degradation, which might be due to the presence of viable meroplankton in the sediment. After the initial primary producer shift from macrophytes to phytoplankton, the lake experienced a short period of cyanobacterial dominance followed by a period of benthic diatom abundance before being replaced by the present algal community consisting of cyanobacteria and meroplanktonic diatoms. Chlorophyll derivatives and carotenoids were highly correlated with total phosphorus. Historic trends inferred from the data include algal and cyanobacterial productivity that increased with increased phosphorus loading. The study demonstrates that valid paleolimnological proxies for historic eutrophication are available in loosely consolidated sediments of shallow, subtropical lakes.     

Large-scale Vertical Momentum,Kinetic Energy and Moisture Fluxes in the Antarctic Sea-ice Region

There are very strong thermal gradients between the Antarctic continent and the sea-ice zone, and between that zone and the ocean to the north. As a result of these contrasts the sea-ice domain is one of strong cyclogenesis and high cyclone frequency. In this study we explore many aspects of that cyclonic behaviour and investigate the manner in which these systems influence, and are influenced by, the sea ice. Using the NCEP-DOE re-analyses (1979–2002) we have determined variables that are proportional to the mean of the wind stress and the mean rate at which mechanical energy is imparted to the surface. Using two decompositions of the wind field we have obtained estimates of how much of these fluxes are contributed to by the transient eddies. We find these to be significant over the sea ice and the ocean to the north, particularly when a new decomposition is used. The presence of frequent and vigorous cyclones is a central factor that determines the positive mean freshwater flux over the sea-ice zone in all seasons. This transfer to the ocean is smallest in summer (0.49 mm day⁻¹) and assumes a maximum of 1.27 mm day⁻¹ in winter.     

Effects Of Changing Surface Heat Flux On Atmospheric Boundary-Layer Flow Over Flat Terrain

We examine the unsteady response of a neutral atmospheric boundary layer (ABL) of depth h and friction velocity u _* when a uniform surface heat flux is applied abruptly or decreased rapidly over a time scale t<inf>θ</inf> less than about h /(10u _*). Standard Monin–Obukhov (MO) relationships are used for the perturbed eddy viscosity profile in terms of the changes to the heat flux and mean shear. Analytical solutions for changes in temperature, mean wind and shear stress profile are obtained for the surface layer, when there are small changes in h /|L_MO| over the time scale t_MO~|L _MO|/(10u_*) (where L _MO and t _MO are the length and time scales, respectively). They show that a maximum in the wind speed profile occurs at the top of the thermal boundary layer for weak surface cooling, i.e. a wind jet, whereas there is a flattening of the profile and no marked maximum for weak surface heating. The modelled profiles are approximately the same as those obtained from the U.K. Met Office Unified Model when operating as a mesoscale model at 12-km horizontal resolution. The theoretical model is modified when strong surface heating is suddenly applied, resulting in a large change in h /|L _MO| (>>1), over the time scale t _MO. The eddy structure is predicted to change significantly and the addition of convective turbulence increases the shear turbulence at the ground. A low-level wind jet can form, with convective turbulence adding to the mean momentum of the flow. This was verified by our laboratory experiment and direct numerical simulations. Additionally, it is shown that the effects of Coriolis acceleration diminish (rather than as suggested in the literature, amplify) the formation of the wind jets in the situations considered here. Hence, only when the surface heat flux changes over time scales greater than 1/f (where f is the Coriolis parameter) does the ABL adjust monotonically between its equilibrium states. These results are also applicable to the ABL passing over spatially varying surface heat fluxes.     

On the Measurement of PANs by Gas Chromatography and Electron Capture Detection

A fast, automated, gas chromatographic system for the airborne measurement of PAN and a series of its homologues is described and its performance is evaluated. Response factors for PAN, PPN, APAN, PiBN, and MPAN have been determined and are discussed with regard to ECD response and to potential losses in the analytical system. Calibration methods used for these tasks are described and compared. The results from this work should help investigators who are employing the widely used GC/ECD method for the measurement of peroxyacyl nitrates to evaluate peaks of PAN homologues that cannot be calibrated for by using the reported response factors.     

Mapping Mineralization Probabilities using Multilayer Perceptrons

Mineral-potential mapping is the process of combining a set of input maps, each representing a distinct geo-scientific variable, to produce a single map which ranks areas according to their potential to host mineral deposits of a particular type. The maps are combined using a mapping function that must be either provided by an expert (knowledge-driven approach), or induced from sample data (data-driven approach). Current data-driven approaches using multilayer perceptrons (MLPs) to represent the mapping function have several inherent problems: they are highly sensitive to the selection of training data; they do not utilize the contextual information provided by nondeposit data; and there is no objective interpretation of the values output by the MLP. This paper presents a new approach by which MLPs can be trained to output values that can be interpreted strictly as representing posterior probabilities. Other advantages of the approach are that it utilizes all data in the construction of the model, and thus eliminates any dependence on a particular selection of training data. The technique is applied to mapping gold mineralization potential in the Castlemaine region of Victoria, Australia, and results are compared with a method based on estimating probability density functions.     

Symmetries in the Optimal Control of Solar Sail Spacecraft

The theory of optimal control is applied to obtain minimum-time trajectories for solar sail spacecraft for interplanetary missions. We consider the gravitational and solar radiation forces due to the Sun. The spacecraft is modelled as a flat sail of mass m and surface area A and is treated dynamically as a point mass. Coplanar circular orbits are assumed for the planets. We obtain optimal trajectories for several interrelated problem families and develop symmetry properties that can be used to simplify the solution-finding process. For the minimum-time planet rendezvous problem we identify different solution branches resulting in multiple solutions to the associated boundary value problem. We solve the optimal control problem via an indirect method using an efficient cascaded computational scheme. The global optimizer uses a technique called Adaptive Simulated Annealing. Newton and Quasi-Newton Methods perform the terminal fine tuning of the optimization parameters.     

Quantifying Exploration Sufficiency While Accommodating Judgment

A computationally efficient method to direct and evaluate the sufficiency of site characterization data is demonstrated on two synthetic subsurface geometries. This method, entitled reliability-based exploration (RBE), combines three-dimensional subsurface analysis and uncertainty in the geologic data to produce a quantifiable measure of data sufficiency, which is directly related to the probability of project success. The RBE approach is illustrated with a three-dimensional finite element soil deformation model, where interfaces separating geologic units are the subsurface data of interest. The RBE method begins with a prior model of the subsurface, which can include geologic judgement. As new information is collected at a site, the prior subsurface model is updated with site data. During the RBE analysis, both a probability of project success and the location of the next boring are computed. The robustness of this computation is illustrated with a practical example of the automatic exploration of two different pinching geometries. The subsurface geometry is imposed on these two sites to demonstrate the importance of geology on the computed results. A comparison of the modeled subsurface and the true (or defined) subsurface at each site shows a close match directly below the proposed structure, where calculated settlement is most sensitive to uncertainty in geology. The study demonstrated that to achieve the same exploration sufficiency more data are required at the site with abruptly changing subsurface geometry than at the site with gradually changing geometry.