Feasibility of pre-earthquake strengthening of buildings based on cost-benefit and life-cycle cost analysis, with the aid of fragility curves

There are two fundamental questions this article aims to deal with. First, whether a pre-earthquake strengthening of a large and heterogeneous building stock (the emphasis here is on building types common in S. Europe), is economically feasible or not, and second what is the optimal retrofit level for mitigating the seismic risk. To this purpose contemporary decision making tools, namely cost-benefit and life-cycle cost analyses, are tailored to the needs of the present study, and implemented with the aid of an ad-hoc developed new software application (COBE06). A method for estimating the reduction in structural vulnerability due to retrofit is proposed, as well as a methodology to determine the optimum retrofit level using the fragility curve approach. Finally, the proposed methodology is used in a pilot application that concerns the city of Thessaloniki, and results are drawn for the feasibility of strengthening the reinforced concrete building stock in this city.     

Rock slope instability assessment using spatially distributed structural orientation data in Darjeeling Himalaya (India)

We discuss a geographic information system (GIS)‐based methodology for rock slope instability assessment based on geometrical relationships between topographic slopes and structural discontinuities in rocks. The methodology involves (a) regionalization of point observations of orientations (azimuth and dip) of structural discontinuities in rocks in order to generate a digital structural model (DStM), (b) testing the kinematical possibility of specific modes of rock slope failures by integrating DStMs and digital elevation model (DEM)‐derived slope and aspect data and (c) computation of stability scenarios with respect to identified rock slope failure modes. We tested the methodology in an area of 90 km² in Darjeeling Himalaya (India) and in a small portion (9 km²) within this area with higher density of field structural orientation data. The results of the study show better classification of rock slope instability in the smaller area with respect to known occurrences of deep‐seated rockslides than with respect to shallow translational rockslides, implying that structural control is more important for deep‐seated rockslides than for shallow translational rockslides. Results of scenario‐based analysis show that, in rock slopes classified to be unstable, stress‐induced rock slope instability tends to increase with increasing level of water saturation. The study demonstrates the usefulness of spatially distributed data of orientations of structural discontinuities in rocks for medium‐ to small‐scale classification of rock slope instability in mountainous terrains. Copyright © 2010 John Wiley & Sons, Ltd.     

Mass fluxes of xenobiotics below cities: challenges in urban hydrogeology

Urban areas are the focus of major ecological, social and economical activity. They are thus also prime locations of increasing conflict with regard to water use and water protection. As a direct and/or indirect consequence of urban land use and human activity, urban water systems are frequently polluted with organic contaminants including waste water-born xenobiotics such as pharmaceuticals, personal care products (collectively known as PPCPs) and endocrine-active substances. This study reviews new integrated methodologies including flux calculations as well as chemical investigations for determining the impact of human activities on urban water systems and on processes within the urban watershed. The use of indicator substances, representing different contaminant sources and pathways, integral pumping tests and mass balance approaches are suitable alternatives within these environments. The issues are explored using contaminant mass balance examples from Halle/Saale and Leipzig, Germany.     

Zircon M257 ‐ a Homogeneous Natural Reference Material for the Ion Microprobe U‐Pb Analysis of Zircon

We introduce and propose zircon M257 as a future reference material for the determination of zircon U‐Pb ages by means of secondary ion mass spectrometry. This light brownish, flawless, cut gemstone specimen from Sri Lanka weighed 5.14 g (25.7 carats). Zircon M257 has TIMS‐determined, mean isotopic ratios (2s uncertainties) of 0.09100 ± 0.00003 for ²⁰⁶pb/²³⁸U and 0.7392 ± 0.0003 for ²⁰⁷pb/²³⁵U. Its ²⁰⁶pb/²³⁸U age is 561.3 ± 0.3 Ma (unweighted mean, uncertainty quoted at the 95% confidence level); the U‐Pb system is concordant within uncertainty of decay constants. Zircon M257 contains ～ 840 μg g^?1 U (Th/U ～ 0.27). The material exhibits remarkably low heterogeneity, with a virtual absence of any internal textures even in cathodoluminescence images. The uniform, moderate degree of radiation damage (estimated from the expansion of unit‐cell parameters, broadening of Raman spectral parameters and density) corresponds well, within the “Sri Lankan trends”, with actinide concentrations, U‐Pb age, and the calculated alpha fluence of 1.66 × 10¹⁸ g^?1. This, and a (U+Th)/He age of 419 ± 9 Ma (2s), enables us to exclude any unusual thermal history or heat treatment, which could potentially have affected the retention of radiogenic Pb. The oxygen isotope ratio of this zircon is 13.9%o VSMOW suggesting a metamorphic genesis in a marble or calc‐silicate skarn.     

Isochron‐burial dating of glaciofluvial deposits: First results from the Swiss Alps

In this study, we use isochron‐burial dating to date the Swiss Deckenschotter, the oldest Quaternary deposits of the northern Alpine Foreland. Concentrations of cosmogenic ¹⁰Be and ²⁶Al in individual clasts from a single stratigraphic horizon can be used to calculate an isochron‐burial age based on an assumed initial ratio and the measured ²⁶Al/¹⁰Be ratio. We suggest that, owing to deep and repeated glacial erosion, the initial isochron ratio of glacial landscapes at the time of burial varies between 6.75 and 8.4. Analysis of 22 clasts of different lithology, shape, and size from one 0.5 m thick gravel bed at Siglistorf (Canton Aargau) indicates low nuclide concentrations: <20 000 ¹⁰Be atoms/g and <150 000 ²⁶Al atoms/g. Using an ²⁶Al/¹⁰Be ratio of 7.6 (arithmetical mean of 6.75 and 8.4), we calculate a mean isochron‐burial age of 1.5 ± 0.2 Ma. This age points to an average bedrock incision rate between 0.13 and 0.17 mm/a. Age data from the Irchel, Stadlerberg, and Siglistorf sites show that the Higher Swiss Deckenschotter was deposited between 2.5 and 1.3 Ma. Our results indicate that isochron‐burial dating can be successfully applied to glaciofluvial sediments despite very low cosmogenic nuclide concentrations. Copyright © 2017 John Wiley & Sons, Ltd.     

What Can be Expected from the GRACE-FO Laser Ranging Interferometer for Earth Science Applications?

The primary objective of the gravity recovery and climate experiment follow-on (GRACE-FO) satellite mission, due for launch in August 2017, is to continue the GRACE time series of global monthly gravity field models. For this, evolved versions of the GRACE microwave instrument, GPS receiver, and accelerometer will be used. A secondary objective is to demonstrate the effectiveness of a laser ranging interferometer (LRI) in improving the satellite-to-satellite tracking measurement performance. In order to investigate the expected enhancement for Earth science applications, we have performed a full-scale simulation over the nominal mission lifetime of 5 years using a realistic orbit scenario and error assumptions both for instrument and background model errors. Unfiltered differences between the synthetic input and the finally recovered time-variable monthly gravity models show notable improvements with the LRI, on a global scale, of the order of 23 %. The gain is realized for wavelengths smaller than 240 km in case of Gaussian filtering but decreases to just a few percent when anisotropic filtering is applied. This is also confirmed for some typical regional Earth science applications which show randomly distributed patterns of small improvements but also degradations when using DDK4-filtered LRI-based models. Analysis of applied error models indicates that accelerometer noise followed by ocean tide and non-tidal mass variation errors are the main contributors to the overall GRACE-FO gravity model error. Improvements in these fields are therefore necessary, besides optimized constellations, to make use of the increased LRI accuracy and to significantly improve gravity field models from next-generation gravity missions.     

Variabilität der Primärproduktion aus dreidimensionalen Modellrechnungen für die Nordsee mit ECOHAM1

Ocean Dynamics - Mit dem dreidimensionalen Modell ECOHAM1 (Ecological North Sea Model, Hamburg, Version 1) wurde die jährliche Primärproduktion für die Jahre 1985 bis 1994 regional...     

Methane Oxidation in the Water Column of Xiangxi Bay,Three Gorges Reservoir

Four field campaigns are carried out to quantify the methane (CH₄) oxidation rate in Xiangxi Bay (XXB) of the Three Gorges Reservoir (TGR), China. The water depth of the sampling site varied from 13 to 30 m resulting from the water level fluctuation of the TGR. The CH₄ oxidation rates are measured in situ as the decline of dissolved CH₄ concentration versus time in incubated, and those rates. The CH₄ oxidation rates range from 1.18 × 10^?3 to 3.69 × 10^?3 µmol L^?1 h^?1, with higher values and stronger variation during summer. A static floating chamber method is used to measure CH₄ emitted to the atmosphere resulting in an annual mean flux of 4.79 µmol m^?2 h^?1. The CH₄ emission rate is significantly negatively correlated with the water level. The results show that a large fraction of CH₄ is consumed in the water column with a range of 28.97–55.90 µmol m^?2 h^?1, accounting for ≈69–98% of the total CH₄ input into the water column, and more than 90% is consumed outside the summer, when the water level is lowest. Water depth, which is dominated by water level of the TGR, is a potentially important driver for CH₄ oxidation and atmospheric emission in the tributary bay.     

Feeding Monsters – A Study of Active Galaxies

We present new interferometric observations of the molecular gas distribution and kinematics in the nuclei of different active galaxies at high angular resolution and high sensitivity carried out with the IRAM Plateau de Bure interferometer (PdBI). The observations cover galaxies in a redshift range of 0.03–1.4. We have so far observed five different active galaxies: NGC3718, NGC1068, HE1029–1831, 3C48 and Q0957+561. The first two objects belong to the NUGA (NUclei of GAlaxies) project – an international collaboration mainly between Spain, France and Germany – containing about 30 Seyfert and LINER galaxies. Both are at the same distance of 14Mpc and show a warped gas and dust disk. The new mosaic map of NGC3718 corrected for short-spacing effects with IRAM 30 m observations well demonstrates the existence of the warped gas disk with several secondary maxima in the projected gas distribution caused by orbit crowding effects. Based on these new data we have improved recent simulations of the warped disk in NGC3718. HE1029–1831 and 3C48 are nearby QSOs. HE1029–1831 is taken out of the Cologne nearby QSO sample. The maps of the integrated CO(1–0) and CO(2–1) emission clearly show that the molecular gas is mostly related to the central bulge with a non-negligible fraction distributed along the bar known from optical observations. Our new CO data of 3C48 unveil new information about the kinematics of its molecular gas complementing and improving further studies based on previous infrared observations and detailed multi-particle simulations. Finally, new measurements of the CO(1–0) line in Q0957+561 – a highly-red-shifted, gravitationally lensed quasar – will be presented as a link to earlier evolutionary stages of active galaxies and their hosts.     

Adakite-like signature of Late Miocene intrusions at the Los Pelambres giant porphyry copper deposit in the Andes of central Chile: metallogenic implications

Adakite-like features are recognized in the Late Miocene (~10 Ma) porphyritic intrusions of the Los Pelambres giant porphyry copper deposit, central Chile (32°S). Located within the southern portion of the flat-slab segment (28–33°S) of the Chilean Andes, the Al- and Na-rich porphyries of Los Pelambres display distinctly higher Sr/Y (~100–300) and La_N/Yb_N (~25–60) ratios than contemporaneous and barren magmatic units (e.g., La Gloria pluton, Cerro Aconcagua volcanic rocks) of the same Andean magmatic belt. Strong fractionation of heavy rare earth elements (HREE), absence of Eu anomalies, high Sr/Y and Zr/Sm and low Nb/Ta ratios suggest melt extraction from a garnet-amphibolite source. The Late-Miocene adakite-like porphyritic intrusions at Los Pelambres formed closely related in time and space to the subduction of the Juan Fernández Ridge (JFR) hotspot chain along the Chilean margin. Current tectonic reconstructions reveal that, at the time of formation of the Los Pelambres rocks, a W-E segment of the JFR started to subduct beneath them, producing a slow-down of a previously rapid southward migration of a NE-ridge—trench collision. These particular tectonic conditions are favorable for the origin of the Los Pelambres porphyry suite by melting of subducting young hotspot rocks under flat-slab conditions. The incorporation of crustal components into the oceanic lithopheric magma source by subduction erosion is evidenced by the Sr-Nd isotope composition of the Los Pelambres rocks different from the MORB signatures of true adakites. A close relationship apparently exists between the origin of this adakite-like magmatism and the source of the mineralization in the Los Pelambres porphyry copper deposit.Editorial handling: R.J. Goldfarb