SPIRE point source photometry: within the Herschel interactive processing environment (HIPE)

The different algorithms appropriate for point source photometry on data from the SPIRE instrument on-board the Herschel Space Observatory, within the Herschel Interactive Processing Environment (HIPE) are compared. Point source photometry of a large ensemble of standard calibration stars and dark sky observations is carried out using the 4 major methods within HIPE: SUSSEXtractor, DAOphot, the SPIRE Timeline Fitter and simple Aperture Photometry. Colour corrections and effective beam areas as a function of the assumed source spectral index are also included to produce a large number of photometric measurements per individual target, in each of the 3 SPIRE bands (250, 350, 500μm), to examine both the accuracy and repeatability of each of the 4 algorithms. It is concluded that for flux densities down to the level of 30mJy that the SPIRE Timeline Fitter is the method of choice. However, at least in the 250 and 350μm bands, all 4 methods provide photometric repeatability better than a few percent down to at approximately 100mJy. The DAOphot method appears in many cases to have a systematic offset of ～8 % in all SPIRE bands which may be indicative of a sub-optimal aperture correction. In general, aperture photometry is the least reliable method, i.e. largest scatter between observations, especially in the longest wavelength band. At the faintest fluxes, <30mJy, SUSSEXtractor or DAOphot provide a better alternative to the Timeline Fitter.     

Using selected pharmaceutical compounds as indicators for surface water and groundwater interaction in the hyporheic zone of a low permeability riverbank

This study investigates the applicability of selected pharmaceutical compounds (e.g. sulfamethoxazole, carbamazepine, ibuprofen) as anthropogenic indicators for the interaction of surface water and groundwater in the hyporheic zone of an alluvial stream. Differences in transport behaviour and the resulting distribution of the pharmaceuticals in the riverine groundwater were evaluated. The investigated field site in the Grand Duchy of Luxembourg, Europe is represented by low permeable sediments and confined aquifer conditions. Water samples from single‐screen and multilevel observation wells installed in the riverbank at the field site were taken and analysed for selected pharmaceuticals and major ions for a period of 6 months. Surface water and groundwater levels were recorded to detect effluent and influent aquifer conditions. Nearly all pharmaceuticals that were detected in the stream were also found in the riverine groundwater. However, concentrations were significantly lower in groundwater than in surface water. A classification into mobile and sorbing/degradable pharmaceuticals based on their transport relevant properties was made and verified by the field data. Gradients with depth for some of these pharmaceuticals were documented and a more detailed understanding of the system stream/riverbank was obtained. It was demonstrated that the selected pharmaceutical compounds can be used as anthropogenic indicators at the investigated field site. However, not all compounds seem to be suitable indicators as their transport behaviour is not fully understood. Copyright © 2012 John Wiley & Sons, Ltd.     

Helicopter-borne measurements of sea ice thickness,using a small and lightweight,digital EM system

Sea ice is an important climate variable and is also an obstacle for marine operations in polar regions. We have developed a small and lightweight, digitally operated frequency-domain electromagnetic-induction (EM) system, a so-called EM bird, dedicated for measurements of sea ice thickness. It is 3.5 m long and weighs only 105 kg, and can therefore easily be shipped to remote places and operated from icebreakers and small helicopters. Here, we describe the technical design of the bird operating at two frequencies of f1 = 3.68 kHz and f2 = 112 kHz, and study its technical performance. On average, noise amounts to ± 8.5 ppm and ± 17.5 ppm for f1 and f2, respectively. Electrical drift amounts to 200 ppm/h and 2000 ppm/h for f1 and f2, during the first 0.5 h of operation. It is reduced by 75% after 2 h. Calibration of the Inphase and Quadrature ppm signals varies by 2 to 3%. A sensitivity study shows that all these signal variations do affect the accuracy of the ice thickness retrieval, but that it remains better than ± 0.1 m over level ice in most cases. This accuracy is also confirmed by means of comparisons of the helicopter EM data with other thickness measurements. The paper also presents the ice thickness retrieval from single-component Inphase data of f1.     

Sea ice as an evaluation target for HEM modelling and inversion

We investigate helicopter electromagnetic (HEM) inversion schemes applied to synthetic and measured HEM sea ice profiling data. Direct HEM data-to-ice-thickness inversion is compared to three different formal, least squares layered earth inversion algorithms.By making several approximations, it is possible to directly invert a single channel measurement (i.e., the in-phase or quadrature component of a single frequency measurement) to obtain an estimate of sea ice thickness. Measurements from multiple input channels, however, can be used in a layered earth inversion to simultaneously recover several model parameters such as sea ice thickness, sea ice conductivity and sub-ice bathymetry. Synthetic data sets for a particular two-frequency HEM system showed that simple least squares inversion algorithms produce reliable estimates of sea ice thickness in cases where the ice is thicker than 3 m. These methods could also recover acceptable estimates of sea ice thickness when a thin, conductive, partially melted sea ice layer was present, and could determine shallow, sub-ice bathymetry in brackish water. As expected, 1D transformations and inversions of synthetic data for a three-dimensional pressure ridge keel structure contained artifacts, notably broadening of the apparent width of the keel.Prior to inverting a field data set acquired over rather thin (~ 0.5 m) Antarctic sea ice, we found it necessary to recalibrate the phase angle of the measurements using a phasor diagram-based method. Direct transformation of a single channel from the recalibrated data set produced more accurate estimates of sea-ice thickness than formal inversion of multi-channel data. We suggest that the least squares inversion methods are inferior in this situation because of the particular characteristics of the two-frequency HEM system used in this evaluation; the extreme differences in sensitivity of high and low frequency data components, the overall low sensitivity to sea ice conductivity (especially for thin ice), and the partially low signal-to noise ratios of the measurements. The data sets used in this study will be made available to the public to allow alternate inversion approaches to be applied and evaluated. It is suggested that inclusion of parameter bounds and other forms of regularization could help to improve the inversion results.     

Validation of the three-dimensional ECOHAM model in the German Bight for 2004 including population dynamics of Pseudocalanus elongatus

A three-dimensional ecosystem model for the North Sea which includes competition between Pseudocalanus elongatus and the rest of the zooplankton biomass was applied to describe the seasonal cycle of zooplankton in 2003–2004. The paper presents the comparison of simulated stage-resolved abundances with copepod counts at several stations in the German Bight during the GLOBEC-Germany project from February to October 2004. A validation of influential state variables gives confidence that the model is able to calculate reliably the stage development and abundances of P. elongatus as well as the range of bulk zooplankton biomass, and thus the ratio of population biomass to total biomass. In the German Bight, the population is below 20% in spring. The ratio increases up to 50% during summer. The number of generations was estimated from peaks in egg abundance to about 4–8 generations of P. elongatus in the southern North Sea. A mean of four generations per year were estimated in the central North Sea, six to eight generations northwest of the Dogger Bank (tails end) and five generations in the German Bight.     

Benthic marine litter in four Gulfs in Greece,Eastern Mediterranean; abundance,composition and source identification

The types, abundance, distribution and sources of benthic marine litter found in four Greek Gulfs (Patras, Corinth, Echinades and Lakonikos) were studied using bottom trawl nets. Mean distribution and weight densities range between 72–437 Item/km² and 6.7–47.4 kg/km². Litter items were sorted into material and usage categories. Plastic litter (56%) is the most dominant material category followed by metal (17%) and glass (11%). Beverage packaging (32%) is the dominant usage category followed by general packaging (28%) and food packaging (21%). Based on the typological results three dominant litter sources were identified; land-based, vessel-based and fishery-based. Application of factor analysis (R- and Q-mode) conducted on both material and usage litter datasets confirmed the existence of the three dominant litter sources. Q-mode analysis further resulted in the quantification of the litter sources; land-based ones provided the majority (69%) of the total litter items followed by vessel-based (26%) and fishery-based (5%) sources. Diverse environmental parameters influence significantly these amounts among the four Gulfs.     

Orbit and origin of the LL7 chondrite Dishchii'bikoh (Arizona)

The trajectory and orbit of the LL7 ordinary chondrite Dishchii'bikoh are derived from low‐light video observations of a fireball first detected at 10:56:26 UTC on June 2, 2016. Results show a relatively steep ~21° inclined orbit and a short 1.13 AU semimajor axis. Following entry in Earth's atmosphere, the meteor luminosity oscillated corresponding to a meteoroid spin rate of 2.28 ± 0.02 rotations per second. A large fragment broke off at 44 km altitude. Further down, mass was lost to dust during flares at altitudes of 34, 29, and 25 km. Surviving meteorites were detected by Doppler weather radar and several small 0.9–29 g meteorites were recovered under the radar reflection footprint. Based on cosmogenic radionuclides and ground‐based radiometric observations, the Dishchii'bikoh meteoroid was 80 ± 20 cm in diameter assuming the density was 3.5 g/cm³. The meteoroid's collisional history confirms that the unusual petrologic class of LL7 does not require a different parent body than three previously observed LL chondrite falls. Dishchii'bikoh was ejected 11 Ma ago from parent body material that has a 4471 ± 6 Ma U‐Pb age, the same as that of Chelyabinsk (4452 ± 21 Ma). The distribution of the four known pre‐impact LL chondrite orbits is best matched by dynamical modeling if the source of LL chondrites is in the inner asteroid belt in a low inclined orbit, with the highly inclined Dishchii'bikoh being the result of interactions with Earth before impacting.     

The cosmic‐ray exposure history of the Twannberg iron meteorite (IIG)

The Twannberg iron meteorite is one out of only six members of the group IIG. The combined noble gas and radionuclide data obtained in this new systematic study indicate that Twannberg with its ~570 recently recovered specimens was a large object with a preatmospheric radius in the range of ~2 m, which corresponds to ~250 × 10³ kg. The cosmic‐ray exposure age for Twannberg is 182 ± 45 Ma. The most surprising result is the long terrestrial age of T_terr =  ka, which is unexpected considering the humid conditions in Switzerland. However, this age is in accord with glaciation events, indicating that the less shielded samples from Mt. Sujet were found close to the position of the original strewn field, whereas the samples from Gruebmatt and Twannbach, which are from more shielded positions, were glacially transported to the east–northeast during the second last ice age (185–130 ka ago) from an original position west of Mt. Sujet.