Evaluation of saltation flux impact responders (Safires) for measuring instantaneous aeolian sand transport intensity

The measurement of aeolian sand transport rates on small scales is of interest to the development and testing of detailed models of sand movement by wind. This paper reports on laboratory evaluations and preliminary field tests of a new design of a piëzo-electric impact responder, called a ‘Safire’, capable of measuring saltation impacts at a frequency of 20 Hz. The advantages of the Safire are: (1) that it provides high-frequency measurements, (2) that it presents a minimal obstruction to the wind flow (no scour observed in the field), and (3) that it is of a (relatively) low-cost.Laboratory calibrations were performed with a vertical gravity flume generating known sand grain fluxes using both mixed sand and specific size fractions. Initial tests investigated three fundamental characteristics: correspondence between digital and analogue signals generated by the instrument, directional response of the probe, and linearity of instrument response to mass flux.Instrument calibration included determination of the momentum threshold required for the sensor to register a grain impact. Based on this lower limit and the known distribution of grain size and speed at different fall heights, a prediction is made as to the sand grain flux the Safire ought to measure, which is then compared with the signal response. The result of this comparison is an assessment of the instrument's efficiency in counting saltating grains. These Safires were also deployed in the field as part of a larger investigation of spatio-temporal transport variability. This experiment provided the opportunity to compare the instrument's performance with traditional sand traps, and this paper develops methods and assumptions required to convert measurements from impact responders to traditional mass transport rates.The evaluations indicate that improvements to the instrument production process are required to ensure a standard momentum threshold among individual instruments. Furthermore, the sensor design needs to be reconsidered in order to eliminate the variation in response depending on azimuth direction, so that the sensor is uniformly omni-directional.     

Quantitative high resolution cathodoluminescence spectroscopy of diagenetic and hydrothermal dolomites

A combination of high resolution cathodoluminescence-spectroscopy (HRS-CL=high resolution spectroscopy of cathodoluminescence emission) with spatial resolving trace element analyses (PIXE=proton induced X-ray emission) is used to establish a method for the quantitative determination of the Mn-content of diagenetic and hydrothermal dolomites using the measurements of peak areas of Mn-activated CL emission bands. This method takes into account the overlap of the CL broad bands of Mn²⁺ in the Mg- and the Ca-lattice-position of dolomite. There is a linear correlation between the peak areas and Mn concentration up to approx. 1000–1500 ppm. Thus, CL spectroscopy allows a determination of Mn concentrations below the abilities of PIXE (10–15 ppm) to less than 1 ppm by extrapolation of this linear relation.

Up to an Fe-content of approx. 2000 ppm, no quenching effect of Fe on this linear relationship occurs. However, Fe-contents above 2000 ppm result in a decrease of Mn-induced luminescence. Even at Fe-concentration >25,000 ppm spectroscopy reveals that Mn-activated CL of dolomite is not entirely extinguished.     

Hydrogeology of a fractured shale (Opalinus Clay): Implications for deep geological disposal of radioactive wastes

As part of the Swiss programme for high-level radioactive-waste disposal, a Jurassic shale (Opalinus Clay) is being investigated as a potential host rock. Observations in clay pits and the results of a German research programme focusing on hazardous waste disposal have demonstrated that, at depths of 10–30 m, the permeability of the Opalinus Clay decreases by several orders of magnitude. Hydraulic tests in deeper boreholes (test intervals below 300 m) yielded hydraulic conductivities <10^–12 m/s, even though joints and faults were included in some of the test intervals. These measurements are consistent with hydrogeological data from Opalinus Clay sections in ten tunnels in the Folded Jura of northern Switzerland. Despite extensive faulting, only a few indications of minor water inflow were encountered in more than 6,600 m of tunnel. All inflows were in tunnel sections where the overburden is less than 200 m. The hydraulic data are consistent with clay pore-water hydrochemical and isotopic data. The extensive hydrogeological data base – part of which derives from particularly unfavourable geological environments – provides arguments that advective transport through faults and joints is not a critical issue for the suitability of Opalinus Clay as a host rock for deep geological waste disposal. Electronic Publication     

Graptolite, Chitinozoan and Scolecodont Reflectances and Their Use as Indicators of Thermal Maturity

Based on studies of the reflectance of Ordovician and Silurian zooclasts from 11 sections around the Huangling Anticline, Hubei, China, combined with determination of the conodont colour alteration indices (CAI) and of infrared spectroscopy of dispersed organic matter from the same or adjacent horizons, it is further proved that reflectances of graptolites, chitinozoans and scolecldonts, like vitrinite and natural bitumen, increase with increasing maturation, but follow different reflectance paths. They may be used, therefore, as thermal maturation indicators. Graptolites display optically strong anisotropy. The maximum reflectance measured from graptolite on polished section cut parallel to the bedding plane is the most suitable for determination of maturation of their host rocks. In polished section chitinozoan and scolecodont show reflectance, but no bireflectance owing to their isotropy. The random reflectance of chitinozoans is higher than that of scolecodonts in the case of the same maturity. By analysing the distribution trends of graptolite, chitionzoan and scolecodont reflectances, the Ordovician and Silurian strata can be subdivided into three areas of maturation in the present region. The potential of oil or gas generation is discussed for each area. The result is basically coincident with the distribution pattern of regional organic maturation presented by CAI and infrared spectroscopic determination of organic matter.     

Subsidenz und tektonik des Saar-Nahe-Beckens (SW-Deutschland)

The Saar-Nahe-Basin in SW-Germany is one of the largest Permo-Carboniferous basins in the internal zone of the Variscides. Its evolution is closely related to movements along the Hunsrück Boundary Fault, which separates the Rhenohercynian and the Saxothuringian zones. Recent deep seismic surveys indicate that the Saar-Nahe-Basin formed in the hanging wall of a major detachment which soles out at lower crustal levels at about 16 km depth. Oblique extension along an inverted Variscan thrust resulted in the formation of a half-graben, within more than 8 km of entirely continental strata accumulated. The structural style within the basin is characterized by normal faults parallel to the basin axis and orthogonal transfer fault zones. Balanced cross-section construction and subsidence analysis indicate extension of the orogenically thickened lithosphere by 35%. Subsidence modeling shows discontinuous depth-dependent extension with laterally varying extension factors for crust and mantle lithosphere. Thus, the offset between maximum rift and thermal subsidence can be explained by a zone of mantle extension shifted laterally with respect to the zone of maximum crustal extension.

     

Statistical analysis of tropical climate anomaly simulations

The statistical analysis of two atmospheric general circulation simulations using the ECHAM3 GCM in permanent January conditions are presented. The two simulations utilize different oceanic surface temperatures in the Atlantic as boundary conditions: the cold simulation has SST representing the anomalous cold conditions during the decade 1904-13 while the warm simulation has SST representative for the decade 1951-60 where anomalous warm conditions have been observed. The analysis concentrates on the simulated differences between both experiments within the tropical belt to test the working hypothesis whether changes in the deep tropical heating initiated by the anomalous SST are responsible for the anomalies in the flow and mass field. We present a method which extracts the significant and dynamically consistent signal of the total difference using a multivariate statistical test based on the amplitudes of an a-priori specified mode expansion. These expansion modes are defined from a variant of the Matsuno-Gill linearized reduced gravity model for the tropical atmosphere. The application of the method shows a clear and well defined tropical signal in the flow and mass field which can be understood as the reponse of the ECHAM3 model to a deep heating anomaly not in the vicinity of the anomalous SST but on the neighboring continents especially South America and with opposite sign in remote areas between Indonesia and the dateline. The signal can be summarized as an enhancement of the GCM's tropical East-West circulation with the ascending branch over South America in the warm simulation compared to the cold run.