Development and installation of bedload monitoring systems with submerged load cells

Bedload governs riverbed channel variations and morphology, it is necessary to determine bedload discharge through an arbitrary cross section in a mountain river. A new system with submerged load cells has been developed to directly measure bedload discharge. The system consists of: (1) an iron box which is 1 m long, 0.5 m wide and 0.1 m in depth, (2) two submerged load cells 0.7 m apart, (3) a pressure sensor and, (4) an electromagnetic velocity meter. This system has been designed to exclude the effect of the hydraulic pressure of water on direct measurements of bedload particle weight. Initial tests in a laboratory were conducted to examine the accuracy of measurements with the system under aerial conditions. The system has been installed in the supercritical flume in Ashi-arai-dani River of the Hodaka Sedimentation Observatory of the Disaster Prevention Research Institute (DPRI) of Kyoto University to obtain bedload discharge under natural conditions. Flume tests were conducted in this channel by artificial supply of uniform sediment particles of several grain sizes. The average velocity of the sediment particles near the bed was estimated using cross-correlation functions for weight waves obtained by the two load cells. Bedload discharge calculations were based on time integration of the product of sediment velocity and sediment weight obtained by the two load cells. This study clarifies the reasons why bedload measurements are difficult, and provides some solutions using the monitoring systems with submerged load cells through the field measurements. Additionally, the applicability of bedload measurement with the submerged load cells is explained based on experimental artificial sediment supply data.     

Importance of intracellular Fe pools on growth of marine diatoms by using unialgal cultures and on the Oyashio region phytoplankton community during spring

We report on the ability for luxury Fe uptake and the potential for growth utilizing intracellular Fe pools for 4 coastal centric diatom isolates and in situ phytoplankton assemblages, mainly composed of diatoms. Iron uptake of the diatom isolates and natural phytoplankton assemblages in the Oyashio region during spring blooms were prevented by adding hydroxamate siderophore desferrioxamine B (DFB). After the addition of DFB, intracellular Fe in the diatom isolates supported 2.4–4.2 cell divisions with 1.2–2.6 Chl a doublings. The intracellular Fe was primarily used for cell generation rather than Chl a production, leading to a reduction in the Chl a cell quota in the Fe-starved cells with time. The metabolic properties of the Fe-starved cells with their cell morphologies were different among species or genera. An on-deck incubation experiment also exhibited 1.9 cell divisions and 0.81 Chl a doublings of phytoplankton after the addition of DFB, also indicating the preference of cell generation over Chl a production. A decrease in the level of cellular Chl a, a main light-harvesting pigment in Fe-starved diatoms, may become a superior survival strategy to protect the cells from high irradiance that can cause photo-oxidative damages through photosynthesis. Such relatively low-Fe with high-light conditions could often occur in surface waters of the Oyashio region from spring to summer.     

Effect of Aspect on Climate Variation in Mountain Ranges of Shennongjia Massif,Central China

The aim of this study was to better understand the mechanisms of regional climate variation in mountain ranges with contrasting aspects as mediated by changes in global climate. It may help predict trends of vegetation variations in native ecosystems in natural reserves. As measures of climate response, temperature and precipitation data from the north, east, and south-facing mountain ranges of Shennongjia Massif in the coldest and hottest months(January and July), different seasons(spring, summer, autumn, and winter) and each year were analyzed from a long-term dataset(1960 to 2003) to tested variations characteristics, temporal and spatial quantitative relationships of climates. The results showed that the average seasonal temperatures and precipitation in the north, east, and south aspects of the mountain ranges changed at different rates. The average seasonal temperatures change rate ranges in the north, east, and south-facing mountain ranges were from –0.0210℃/yr to 0.0143℃/yr, –0.0166℃/yr to 0.0311℃/yr, and –0.0290 ℃/yr to 0.0084℃/yr, respectively, and seasonal precipitation variation magnitude were from –1.4940 mm/yr to 0.6217 mm/yr, –1.6833 mm/yr to 2.6182 mm/yr, and –0.8567 mm/yr to 1.4077 mm/yr, respectively. The climates variation trend among the three mountain ranges were different in magnitude and direction, showing a complicated change of the climates in mountain ranges and some inconsistency with general trends in global climate change. The climate variations were significantly different and positively correlated cross mountain ranges, revealing that aspects significantly affected on climate variations and these variations resulted from a larger air circulation system, which were sensitive to global climate change. We conclude that location and terrain of aspect are the main factors affecting differences in climate variation among the mountain ranges with contrasting aspects.     

Assessment of Exploration Bias in Data-Driven Predictive Models and the Estimation of Undiscovered Resources

The spatial distribution of discovered resources may not fully mimic the distribution of all such resources, discovered and undiscovered, because the process of discovery is biased by accessibility factors (e.g., outcrops, roads, and lakes) and by exploration criteria. In data-driven predictive models, the use of training sites (resource occurrences) biased by exploration criteria and accessibility does not necessarily translate to a biased predictive map. However, problems occur when evidence layers correlate with these same exploration factors. These biases then can produce a data-driven model that predicts known occurrences well, but poorly predicts undiscovered resources. Statistical assessment of correlation between evidence layers and map-based exploration factors is difficult because it is difficult to quantify the “degree of exploration.” However, if such a degree-of-exploration map can be produced, the benefits can be enormous. Not only does it become possible to assess this correlation, but it becomes possible to predict undiscovered, instead of discovered, resources. Using geothermal systems in Nevada, USA, as an example, a degree-of-exploration model is created, which then is resolved into purely explored and unexplored equivalents, each occurring within coextensive study areas. A weights-of-evidence (WofE) model is built first without regard to the degree of exploration, and then a revised WofE model is calculated for the “explored fraction” only. Differences in the weights between the two models provide a correlation measure between the evidence and the degree of exploration. The data used to build the geothermal evidence layers are perceived to be independent of degree of exploration. Nevertheless, the evidence layers correlate with exploration because exploration has preferred the same favorable areas identified by the evidence patterns. In this circumstance, however, the weights for the “explored” WofE model minimize this bias. Using these revised weights, posterior probability is extrapolated into unexplored areas to estimate undiscovered deposits.     

An estimation of internal soliton forces on a pile in the ocean

Internal soliton forces on oil-platform piles in the ocean are estimated with the Morison Formula. Different from sur- face wave forces, which change only in magnitude along a pile, internal soliton forces can be distributed over the entire pile in the water and they change not only in magnitude but also in direction with depth. Our calculations show that the maximum total force caused by a soliton with its associated current of 2.1 m s-1 is nearly equal to the maximum total force exerted by a surface wave with a wavelength of 300 m and a wave-height of 18 m. The total internal soliton force is large enough to affect the operations of marine oil platforms and other facilities. Therefore, the influence of internal solitons should not be neglected in the design of oil platforms.     

On the impact of wind on the development of wave field during storm Britta

The observation of extreme waves at FINO 1 during storm Britta on the 1st November 2006 has initiated a series of research studies regarding the mechanisms behind. The roles of stability and the presence of the open cell structures have been previously investigated but not conclusive. To improve our understanding of these processes, which are essential for a good forecast of similarly important events offshore, this study revisits the development of storm Britta using an atmospheric and wave coupled modeling system, wind and wave measurements from ten stations across the North Sea, cloud images and Synthetic Aperture Radar (SAR) data. It is found here that a standard state-of-the-art model is capable of capturing the important characteristics of a major storm like Britta, including the storm path, storm peak wind speed, the open cells, and peak significant wave height (H _s ) for open sea. It was also demonstrated that the impact of the open cells has negligible contribution to the development of extreme H _s observed at FINO 1. At the same time, stability alone is not sufficient in explaining the development of extreme H _s . The controlling conditions for the development of Britta extreme H _s observed at FINO 1 are the persistent strong winds and a long and undisturbed fetch over a long period.     

Energy and stability in the Full Two Body Problem

The conditions for relative equilibria and their stability in the Full Two Body Problem are derived for an ellipsoid–sphere system. Under constant angular momentum it is found that at most two solutions exist for the long-axis solutions with the closer solution being unstable while the other one is stable. As the non-equilibrium problem is more common in nature, we look at periodic orbits in the F2BP close to the relative equilibrium conditions. Families of periodic orbits can be computed where the minimum energy state of one family is the relative equilibrium state. We give results on the relative equilibria, periodic orbits and dynamics that may allow transition from the unstable configuration to a stable one via energy dissipation.      

Two types of summertime heating over Asian large-scale orography and excitation of potential-vorticity forcing II. Sensible heating over Tibetan-Iranian Plateau

Based on analysis and simulation, the interaction of thermal forcing between the Tibetan Plateau (TP) and Iranian Plateau (IP) in summer is investigated. Associated influences on water vapor transport in the Asian subtropical monsoon region and the formation of a cold center in the lower stratosphere over Eurasia are also investigated. Results show that surface sensible heating (SH) over the two plateaus not only have mutual influences but also feedback to each other. SH over the IP can reduce the SH and increase the LH over the TP, whereas the SH over the TP can increase surface heating over the IP, thereby reaching quasi-equilibrium among the SH and LH over the TP, IP SH and atmosphere vertical motion. Therefore, the so-called Tibetan-Iranian Plateau coupling system (TIPS) is constructed, which influences atmosphere circulation. In the TIPS system, interaction between surface SH and LH over the TP plays a leading role. SH of the IP and TP influences on other regions not only have superimposed effects but also mutually offset. Accounting for contributions to the convergence of water vapor transport in the Asian subtropical monsoon region, TP SH contributes more than twice that of the IP. The combined influence of SH over TP and IP represents the major contribution to the convergence of water vapor transport in that region. In addition, the heating effect of TIPS increases the upper tropospheric temperature maximum and lifts the tropopause, cooling the lower stratosphere. Combined with large-scale thermal forcing of the Eurasian continent, the TIPS produces a strong anticyclonic circulation and the South Asian High that warms the upper troposphere and cools the lower stratosphere, thereby affecting regional and global weather and climate.     

New technologies and systems for high quality citrus fruit production,labor-saving and orchard construction in mountain areas of Japan

Novel technologies have been necessary for improving fruit quality and productivity of citrus,labor-saving and orchard conservation on steep slope lands since aging of growers and decrease in the number of successors is remarkable in mountain areas of southwestern Japan. The purpose of this paper is to introduce new technologies for improving citrus production that have been developed in recent years. A new fruit quality control system using drip irrigation and liquid fertilization technique combined with year-round plastic mulching was developed, and it enables high quality and stable citrus fruit production. Water and/or nutrient solution is automatically supplied through drip tubes that are laid under the mulching sheets to give adequate water stress, so as to improve sugar and acid content of fruit. A new transportation system for steep sloping citrus orchards, which is a combination of the monorail system and contour narrow paths, was suggested. A small walking cultivator was developed to explain the procedure of narrow path excavation. After introducing the narrow path, working hours for fertilizer and chemicalherbicide application were reduced. Disasterpr evention mapping of citrus orchards on slope landswas developed based on computer-aided seepage estimation and topographic data. The mapping can show zones of both ascending flow and descendingflow of underground water during heavy rains incitrus orchards. The mapping is considered to be effective for the management of orchards andprevention of erosion on slope lands.     

Distribution patterns of chlorophyll <Emphasis Type="Italic">a</Emphasis> in spring and autumn in association with hydrological features in the southern Yellow Sea and northern East China Sea

Two field studies were conducted to measure pigments in the Southern Yellow Sea (SYS) and the northern East China Sea (NECS) in April (spring) and September (autumn) to evaluate the distribution pattern of phytoplankton stock (Chl a concentration) and the impact of hydrological features such as water mass, mixing and tidal front on these patterns. The results indicated that the Chl a concentration was 2.43±2.64 (Mean ± SD) mg m^?3 in April (range, 0.35 to 17.02 mg m^?3) and 1.75±3.10 mg m^?3 in September (from 0.07 to 36.54 mg m^?3) in 2003. Additionally, four areas with higher Chl a concentrations were observed in the surface water in April, while two were observed in September, and these areas were located within or near the point at which different water masses converged (temperature front area). The distribution pattern of Chl a was generally consistent between onshore and offshore stations at different depths in April and September. Specifically, higher Chl a concentrations were observed along the coastal line in September, which consisted of a mixing area and a tidal front area, although the distributional pattern of Chl a concentrations varied along transects in April. The maximum Chl a concentration at each station was observed in the surface and subsurface layer (0–10 m) for onshore stations and the thermocline layer (10–30 m) for offshore stations in September, while the greatest concentrations were generally observed in surface and subsurface water (0–10 m) in April. The formation of the Chl a distributional pattern in the SYS and NECS and its relationship with possible influencing factors is also discussed. Although physical forces had a close relationship with Chl a distribution, more data are required to clearly and comprehensively elucidate the spatial pattern dynamics of Chl a in the SYS and NECS.