Study of Metal Distribution in Raw and Screened Swine Manure

The growth of industrial swine production over the last few years has led to a growth in concern over effluents generated by the activity. Several elements, mainly toxic metals, can be present in swine wastewater and can have a serious environmental impact. It is important, therefore, to know the metal concentration before the discharge of wastewater. In this work the temporal metal distribution in swine manure and its potential reduction using coarse (2 mm) and fine (<0.45 μm) liquid‐solid separation techniques were investigated. In order to do this, different swine manure sample preparation methods for Al, Ba, Cd, Co, Cr, Cu, Fe, Mg, Mn, Ni, Pb, Sr and Zn determination by Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES) were tested. The acid mixtures used to digest the manure sample significantly affected the metal recovery. Good analyte recoveries were observed with nitric acid/hydrogen peroxide mixtures or nitric acid/perchloric acid mixtures. Sulfuric acid/hydrogen peroxide mixtures produced inconsistent results and poor recoveries, mainly for Ba and Pb. It was observed that metal concentrations in swine manure varied greatly with time, up to one order of magnitude, due to changes in swine production such as feed and animal numbers. Metals concentrations observed in the raw wastewater exceeded Brazilian limits for discharge into water bodies and recommendations for agricultural use. Results obtained from the liquid‐solid separation study showed that metals in the raw swine manure were not removed with coarse screening. However, the major fraction of metals were removed by filtration (0.45 μm), with the exception of Na, K and Sr. Thus, the use of liquid‐solid separation techniques that capture the fine solid fractions (and associated metals) from raw manure can have a favorable impact on the environment and contribute to swine production wastewater treatment.     

Coherent integration time limit of a mobile receiver for indoor GNSS applications

There is an emerging requirement for processing global navigation satellite system (GNSS) signals indoor where the signal is very weak and subjected to spatial fading. Typically, longer coherent integration intervals provide the additional processing gain required for the detection and processing of such weak signals. However, the arbitrary physical motion of the handset imputed by the user limits the effectiveness of longer coherent integration intervals due to the spatial decorrelation of the multipath-faded GNSS signal. In this paper, limits of coherent integration due to spatial decorrelation are derived and corroborated with experimental verification. A general result is that the processing gain resulting from direct coherent integration saturates after the antenna has moved through a certain distance, which for typical indoor propagation, is about half a carrier wavelength. However, a refined Doppler search coupled with a prolonged coherent integration interval extends this limit, which is effectively a manifestation of selective diversity.     

Holocene rockfalls in the southern Negev Desert,Israel and their relation to Dead Sea fault earthquakes

Rockfall ages in tectonically active regions provide information regarding frequency and magnitude of earthquakes. In the hyper-arid environment of the Dead Sea fault (DSF), southern Israel, rockfalls are most probably triggered by earthquakes. We dated rockfalls along the western margin of the DSF using terrestrial cosmogenic nuclides (TCN). At each rockfall site, samples were collected from simultaneously exposed conjugate boulders and cliff surfaces. Such conjugate samples initially had identical pre-fall (“inherited”) TCN concentrations. After boulder detachment, these surfaces were dosed by different production rates due to differences in post-fall shielding and geometry. However, in our study area, pre-rockfall inheritance and post-rockfall production rates of TCN cannot be evaluated. Therefore, we developed a numerical approach and demonstrated a way to overcome the above-mentioned problems. This approach can be applied in other settings where rockfalls cannot be dated by simple exposure dating. Results suggest rockfall ages between 3.6 ± 0.8 and 4.7 ± 0.7 ka. OSL ages of sediment accumulated behind the boulders range between 0.6 ± 0.1 and 3.4 ± 1.4 ka and support the TCN results. Our ages agree with dated earthquakes determined in paleoseismic studies along the entire length of the DSF and support the observation of intensive earthquake activity around 4–5 ka.     

Integrating lysimeter drainage and eddy covariance flux measurements in a groundwater recharge model

Abstract

Field-scale water balance is difficult to characterize because controls exerted by soils and vegetation are mostly inferred from local-scale measurements with relatively small support volumes. Eddy covariance flux and lysimeters have been used to infer and evaluate field-scale water balances because they have larger footprint areas than local soil moisture measurements. This study quantifies heterogeneity of soil deep drainage (D) in four 12.5-m² repacked lysimeters, compares evapotranspiration from eddy covariance (ET_EC) and mass balance residuals of lysimeters (ETwb_Lys), and models D to estimate groundwater recharge. Variation in measured D was attributed to redirection of snowmelt infiltration and differences in lysimeter hydraulic properties caused by surface soil treatment. During the growing seasons of 2010, 2011 and 2012, ETwb_Lys (278, 289 and 269 mm, respectively) was in good agreement with ET_EC (298, 301 and 335 mm). Annual recharge estimated from modelled D was 486, 624 and 613 mm for three calendar years 2010, 2011 and 2012, respectively. In summary, lysimeter D and ET_EC can be integrated to estimate and model groundwater recharge.

Editor D. Koutsoyiannis     

Geochemical processes in a Mediterranean Lake: a high-resolution study of the last 4,000 years in Zoñar Lake,southern Spain

High-resolution geochemical analysis of a 6-m-long sediment core from Zoñar Lake, southern Spain, provides a detailed characterization of major changes in lake and watershed processes during the last 4,000 years. Geochemical variables were used as paleolimnological indicators and complement Zoñar Lakes’s paleoenvironmental reconstruction based on sedimentological and biological proxies, which define periods of increasing allochthonous input to the lake and periods of dominant autochthonous sedimentation. Chemical ratios identify periods of endogenic carbonate formation (higher Ca/Al, Sr/Al and Ba/Al ratios), evaporite precipitation (higher S/Al, Sr/Al ratios), and anoxic conditions (higher Mo/Al, U/Th ratios and Eu anomaly). Higher productivity is marked by elevated organic carbon content and carbonate precipitation (Mg/Ca). Hydrological reconstruction for Zoñar Lake was based on sedimentological, mineralogical and biological proxies, and shows that lower lake levels are characterized by Sr-rich sediments (a brackish lake with aragonite) and S-rich sediments (a saline lake with gypsum), while higher lake levels are characterized by sediments enriched in elements associated with alumino-silicates (Al, K, Ti, Fe, trace and rare earth elements), reflecting fresher conditions. Geochemical indicators also mark periods of higher detrital input to the lake related to human activity in the watershed: (1) during the Iberian Roman Humid Period (650 BC–AD 300), around the onset of the Little Ice Age (AD 1400), during the relatively drier Post-Roman and Middle Ages (AD 800–1400), and over the last 50 years, due to mechanized farming practices. Heavy metal enrichment in the sediments (Cu and Ni) suggests intensification of human activities during the Iberian Roman Period, and the use of fertilizers during the last 50 years.     

Integrative taxonomic description of Plakina kanaky,a new polychromatic sponge species from New Caledonia (Porifera: Homoscleromorpha)

Four similar sponges of different colors, all unknown to science, were collected in submarine caves of New Caledonia. We aimed at determining whether the four chromotypes represented different species or phenotypic variations of a unique new species. We used an integrative taxonomic approach combining morphologic, molecular and metabolomic analyses. The main traits that define these specimens are a skeleton made of monolophose, trilophose and tetralophose calthrops only, high chemical diversity and a high abundance and diversity of prokaryotic symbionts. The symbiotic community includes two unique prokaryote morphotypes, which are described for the first time in Homoscleromorpha, and appeared to be vertically transmitted. Although several features slightly differ among chromotypes, the most parsimonious conclusion was to propose a single new species Plakina kanaky sp. nov. Our phylogenetic analysis indicated the paraphyly of the Plakina genus, with P. kanaky sp. nov. belonging to a clade that includes Plakina jani and Plakina trilopha. The present work demonstrates that integrative taxonomy should be used in order to revise the entire Plakinidae family and especially the non‐monophyletic genus Plakina.     

Modelling regional effects of artificial groundwater recharge in a multilayer aquifer characterized by perched water tables

This paper presents an approach to estimate the effects of a managed recharge experiment in a multilayer aquifer characterized by the presence of perched water tables in the Medina del Campo groundwater body, Douro basin, central Spain. A numerical model was developed to evaluate the effect of artificial recharge on the shallow sector of a regional-scale aquifer and on formerly active wetlands. The model was developed in the Visual MODFLOW Pro v.2011.1 environment in order to represent and analyse the regional impact of this artificial recharge event. Results suggest that the assumption of a single perched system may prove useful in regional contexts where data is limited. From a study site perspective, managed recharge is observed to increase shallow storage along the riverbanks, which is considered valuable for environmental purposes. However, downstream wetlands are unlikely to experience a significant recovery. Furthermore, only a small percentage of artificial recharge is expected to reach the deep regional aquifer. This method can be exported to settings characterized by the presence of perched aquifers and associated groundwater dependent ecosystems.     

Determination of the Jenkinson and Collison’s weather types for the western Mediterranean basin over the 1948-2009 period. Temporal analysis

We determined the weather type, according to the Jenkinson and Collison procedure, of the 22 646 days in the 1948-2009 period for the western Mediterranean basin. The analysis is based upon the surface pressure values of the NCEP/NCAR reanalysis, for a grid of nine points with extreme vertices at 45º N, 5º W and 35º N, 15º E, which provides a broad synoptic catalogue for this region. We analyzed the trends of the types and their different groupings during the same period. The most frequent type is U (undetermined), with an annual average of approximately 100 days (99.4, 27.2%), followed by type A (anticyclone), with 75.5 days/ year (20.7%), and C (depression), with 67.8 days/year (18.6%). The high frequency of type U is due to the habitual pressure of baric fields with a low gradient over Mediterranean waters in the warm half of the year. According to their directions, the types from the west are the most frequent and those from the south, the least. The monthly regime of the most frequent types and groupings is quite regular; type C groups, as well as advective and cyclonic curvature groups, present summertime minima and maxima in the cold half of the year, whereas the opposite occurs with types U and A. The main statistically significant annual trends in the 1948-2009 period involve a decrease in type A (–4.19 days/decade, that is, –29.0%) and an increase in type U, the cyclonic types and those presenting an easterly component. On comparing the 31-yr sub-periods 1948-1978 and 1979-2009, the tendencies of A and U were confirmed, and increases can generally be seen in the types presenting an easterly component and a decrease in those with a westerly component. The variation in type A ranged from 2490 days in the first sub-period to 2192 in the second one (p = 0.000), mainly concentrated in summer and autumn. This evident reduction of type A coincides, paradoxically, with an increase in the sea surface pressure variable (+0.31 hPa/decade) throughout the 62 years of analysis. The negative trend found in type A differs from the results of some studies. The different analysis periods, the different scales or areas of study and the variety of methods used to determine the weather types can account for the fact that these results are discordant. Moreover, warming over the last few decades in the waters of the western Mediterranean basin, as well as the clearly cyclogenetic character of the gulfs of Lion and Genoa, might account for the decrease in type A and the increase in the cyclonic curvature types.     

Platinum-group element distribution in base-metal sulfides of the Merensky Reef from the eastern and western Bushveld Complex, South Africa

Base-metal sulfides in magmatic Ni-Cu-PGE deposits are important carriers of platinum-group elements (PGE). The distribution and concentrations of PGE in pentlandite, pyrrhotite, chalcopyrite, and pyrite were determined in samples from the mineralized portion of four Merensky Reef intersections from the eastern and western Bushveld Complex. Electron microprobe analysis was used for major elements, and in situ laser ablation inductively-coupled plasma mass spectrometry (LA-ICP-MS) for trace elements (PGE, Ag, and Au). Whole rock trace element analyses were performed on representative samples to obtain mineralogical balances. In Merensky Reef samples from the western Bushveld, both Pt and Pd are mainly concentrated in the upper chromitite stringer and its immediate vicinity. Samples from the eastern Bushveld reveal more complex distribution patterns. In situ LA-ICP-MS analyses of PGE in sulfides reveal that pentlandite carries distinctly elevated PGE contents, whereas pyrrhotite and chalcopyrite only contain very low PGE concentrations. Pentlandite is the principal host of Pd and Rh in the ores. Palladium and Rh concentrations in pentlandite reach up to 700 and 130 ppm, respectively, in the samples from the eastern Bushveld, and up to 1,750 ppm Pd and up to 1,000 ppm Rh in samples from the western Bushveld. Only traces of Pt are present in the base-metal sulfides (BMS). Pyrrhotite contains significant though generally low amounts of Ru, Os, and Ir, but hardly any Pd or Rh. Chalcopyrite contains most of the Ag but carries only extremely low PGE concentrations. Mass balance calculations performed on the Merensky Reef samples reveal that in general, pentlandite in the feldspathic pyroxenite and the pegmatoidal feldspathic pyroxenite hosts up to 100 % of the Pd and Rh and smaller amounts (10–40 %) of the Os, Ir, and Ru. Chalcopyrite and pyrrhotite usually contain less than 10 % of the whole rock PGE. The remaining PGE concentrations, and especially most of the Pt (up to 100 %), are present in the form of discrete platinum-group minerals such as cooperite/braggite, sperrylite, moncheite, and isoferroplatinum. Distribution patterns of whole rock Cu, Ni, and S versus whole rock Pd and Pt show commonly distinct offsets. The general sequence of “offset patterns” of PGE and BMS maxima, in the order from bottom to top, is Pd in pentlandite?→?Pd in whole rock?→?(Cu, Ni, and S). The relationship is not that straightforward in general; some of the reef sequences studied only partially show similar trends or are more complex. In general, however, the highest Pd concentrations in pentlandite appear to be related to the earliest, volumetrically rather small sulfide liquids at the base of the Merensky Reef sequence. A possible explanation for the offset patterns may be Rayleigh fractionation.