Velocity characteristics along a small step–pool channel

This paper summarizes measurements of velocity along three reaches of a small mountain channel with step–pool bedforms. A one‐dimensional electromagnetic current meter was used to record velocity fluctuations at 37 fixed measurement points during five measurement intervals spanning the peak of the annual snowmelt hydrograph. Measurement cross‐sections were located upstream from a bed‐step, at the step lip, downstream from the step, and in a uniform‐gradient run. Data analyses focused on characteristics of velocity profiles, and on correlations between velocity characteristics and the potential control variables bedform type, reach gradient and flow depth. To test the hypothesis that velocity characteristics are related to channel bedform types, ANOVA and ANCOVA tests were performed for the average velocity and coefficient of variation of point velocity data. Results indicate that high frequency velocity variations correlate to some degree with both channel characteristics and discharge. Velocity became more variable as stage increased, particularly at low‐gradient reaches with less variable bed roughness. Velocity profiles suggest that locations immediately downstream from bed‐steps are dominated by wake turbulence from mid‐profile shear layers. Locations immediately upstream from steps, at step lips, and in runs are dominated by bed‐generated turbulence. Adverse pressure gradients upstream and downstream from steps may be enhancing turbulence generation, whereas favourable pressure gradients at steps are suppressing turbulence. The bed‐generated turbulence and skin friction of runs appear to be less effective energy dissipators than the wake‐generated turbulence and form drag of step–pool bedforms. Copyright © 2000 John Wiley & Sons, Ltd.     

Bayesian spatial modeling of Lavaca Bay pollutants

Locational risk of increased mercury and PAH concentrations in Lavaca Bay, Texas sediments and eastern oysters (Crassostrea virginica) harvested from Lavaca Bay, Texas were analysed. Chemical analysis results were evaluated utilizing Bayesian geo-statistical methods for comparison of the model fit of a random effects model versus a convoluted model which included both random and spatial effects. For those results fit best with the convoluted model, continuous surface maps of predicted parameter values were created. Sediment and oyster concentrations of mercury and the majority of measured PAHs were fit best with the convoluted model. The locational risks of encountering elevated concentrations of these pollutants in Lavaca Bay sediments and oysters were highest in close proximity to industrial facilities.     

Channel flow competence and sediment transport in upland streams in southeast Australia

Bedload transport data from planebed and step‐pool reach types are used to determine grain size transport thresholds for selected upland streams in southeast Australia. Morphological differences between the reach types allow the effects of frictional losses from bedforms, microtopography and bed packing to be incorporated into the dimensionless critical shear stress value. Local sediment transport data are also included in a regime model and applied to mountain streams, to investigate whether empirical data improve the delineation of reach types on the basis of dimensionless discharge per unit width (q*) and dimensionless bedload transport (q_b*). Instrumented planebed and step‐pool sites are not competent to transport surface median grains (D_50s) at bankfull discharge (Q_bf). Application of a locally parametrized entrainment equation to the full range of reach types in the study area indicates that the majority of cascades, cascade‐pools, step‐pools and planebeds are also not competent at Q_bf and require a 10 year recurrence interval flood to mobilize their D_50s. Consequently, the hydraulic parameters of the regime diagram, which assume equilibrium conditions at bankfull, are ill suited to these streams and provide a poor basis of channel delineation. Modifying the diagram to better reflect the dominant transported bedload size (equivalent to the D₁₆ of surface sediment) made only slight improvements to reach delineation and had greatest effect on the morphologies with smaller surface grain sizes such as forced pool‐riffles and planebeds. Likewise, the Corey shape factor was incorporated into the regime diagram as an objective method for adjusting a base dimensionless critical shear stress (τ*_c50b) to account for lithologically controlled grain shape on bed packing and entrainment. However, it too provided only minor adjustments to reach type delineation. Copyright © 2007 John Wiley & Sons, Ltd.     

Meridional flow profile measurements with SOHO/MDI

We present meridional flow measurements of the Sun using a novel helioseismic approach for analyzing SOHO/MDI data in order to push the current limits in radial depth. Analyzing three consecutive months of data during solar minimum, we find that the meridional flow is as expected poleward in the upper convection zone, turns equatorward at a depth of around 40 Mm (∼ 0.95 R_⊙), and possibly changes direction again in the lower convection zone. This may indicate two meridional circulation cells in each hemisphere, one beneath the other. (© 2007 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Aggregational behavior of the blue mussels Mytilus edulis and Mytilus trossulus: a potential pre‐zygotic reproductive isolation mechanism

The blue mussels Mytilus edulis and Mytilus trossulus occur sympatrically and are able to hybridize in populations on the eastern coast of Newfoundland, Canada, presenting an opportunity to study their aggregational behavior. Aggregation behavior may therefore provide insight into post‐settlement interactions and pre‐zygotic reproductive isolation between the species. Three treatments were designed using M. edulis and M. trossulus to investigate their intraspecific and interspecific spatial distribution patterns. With Ripley’s K‐function and Monte Carlo simulation analysis, we found that in the single‐species treatment, M. edulis aggregated significantly but not M. trossulus. Based on results of two‐way ANOVAs, both the number of aggregations and the moving distance were significantly affected by the treatments (single‐species or mixed‐species treatment) and times (24, 48, 72 and 96 h). In further pairwise comparisons using Tukey’s test, M. edulis aggregated differently with or without M. trossulus occupying the same tank, suggesting that the aggregational behavior of M. edulis could be driven by species‐specific chemical cues. The result that M. edulis aggregates intraspecifically may increase the probability of intraspecific fertilization of the spawned gametes and thus function as a pre‐zygotic reproductive isolation mechanism maintaining the blue mussel hybrid zone.     

Channel response to sediment release: insights from a paired analysis of dam removal

Dam removals with unmanaged sediment releases are good opportunities to learn about channel response to abruptly increased bed material supply. Understanding these events is important because they affect aquatic habitats and human uses of floodplains. A longstanding paradigm in geomorphology holds that response rates to landscape disturbance exponentially decay through time. However, a previous study of the Merrimack Village Dam (MVD) removal on the Souhegan River in New Hampshire, USA, showed that an exponential function poorly described the early geomorphic response. Erosion of impounded sediments there was two‐phased. We had an opportunity to quantitatively test the two‐phase response model proposed for MVD by extending the record there and comparing it with data from the Simkins Dam removal on the Patapsco River in Maryland, USA. The watershed sizes are the same order of magnitude (10² km²), and at both sites low‐head dams were removed (~3–4 m) and ~65 000 m³ of sand‐sized sediments were discharged to low‐gradient reaches. Analyzing four years of repeat morphometry and sediment surveys at the Simkins site, as well as continuous discharge and turbidity data, we observed the two‐phase erosion response described for MVD. In the early phase, approximately 50% of the impounded sediment at Simkins was eroded rapidly during modest flows. After incision to base level and widening, a second phase began when further erosion depended on floods large enough to go over bank and access impounded sediments more distant from the newly‐formed channel. Fitting functional forms to the data for both sites, we found that two‐phase exponential models with changing decay constants fit the erosion data better than single‐phase models. Valley width influences the two‐phase erosion responses upstream, but downstream responses appear more closely related to local gradient, sediment re‐supply from the upstream impoundments, and base flows. Copyright © 2017 John Wiley & Sons, Ltd.     

Using structure‐from‐motion to create glacier DEMs and orthoimagery from historical terrestrial and oblique aerial imagery

Increased resolution and availability of remote sensing products, and advancements in small‐scale aerial drone systems, allows observations of glacial changes at unprecedented levels of detail. Software developments, such as structure‐from‐motion (SfM), now allow users an easy and efficient method to generate three‐dimensional (3D) models and orthoimages from aerial or terrestrial datasets. While these advancements show promise for current and future glacier monitoring, many regions still suffer a lack of observations from earlier time periods. We report on the use of SfM to extract spatial information from various historic imagery sources. We focus on three geographic regions, the European Alps, high Arctic Norway and the Nepal Himalayas. We used terrestrial field photographs from 1896, high oblique aerial photographs from 1936 and aerial handheld photographs from 1978 to generate digital elevation models (DEMs) and orthophotos of the Rhone glacier, Brøggerhalvøya and the lower Khumbu glacier, respectively. Our analysis shows that applying SfM to historic imagery can generate high quality models using only ground control points. Limited camera/orientation information was largely reproduced using self‐calibrated model data. Using these data, we calculated mean ground sampling distances across each site which demonstrates the high potential resolution of resulting models. Vertical errors for our models are ±5.4 m, ±5.2 m and ±3.3 m. Differencing shows similar patterns of thinning at lower Rhone (European Alps) and Brøggerhalvøya (Norway) glaciers, which have mean thinning rates of 0.31 m a^?1 (1896–2010) to 0.86 m a^?1 (1936–2010) respectively. On these clean ice glaciers thinning is highest in the terminus region and decreasing up‐glacier. In contrast to these glaciers, uneven topography, exposed ice‐cliffs and debris cover on the Khumbu glacier create a highly variable spatial distribution of thinning. The mean thinning rate for the Khumbu study area was found to be 0.54 ± 0.9 m a^?1 (1978–2015). Copyright © 2017 John Wiley & Sons, Ltd.     

Turbulence in the presence of internal waves in the bottom boundary layer of the California inner shelf

Turbulence measurements were collected in the bottom boundary layer of the California inner shelf near Point Sal, CA, for 2 months during summer 2015. The water column at Point Sal is stratified by temperature, and internal bores propagate through the region regularly. We collected velocity, temperature, and turbulence data on the inner shelf at a 30-m deep site. We estimated the turbulent shear production (P), turbulent dissipation rate (ε), and vertical diffusive transport (T), to investigate the near-bed local turbulent kinetic energy (TKE) budget. We observed that the local TKE budget showed an approximate balance (P?≈?ε) during the observational period, and that buoyancy generally did not affect the TKE balance. On a finer resolution timescale, we explored the balance between dissipation and models for production and observed that internal waves did not affect the balance in TKE at this depth.     

Shipping noise in a dynamic sea: a case study of grey seals in the Celtic Sea

Shipping noise is a threat to marine wildlife. Grey seals are benthic foragers, and thus experience acoustic noise throughout the water column, which makes them a good model species for a case study of the potential impacts of shipping noise. We used ship track data from the Celtic Sea, seal track data and a coupled ocean-acoustic modelling system to assess the noise exposure of grey seals along their tracks. It was found that the animals experience step changes in sound levels up to ~ 20 dB at a frequency of 125 Hz, and ~ 10 dB on average over 10–1000 Hz when they dive through the thermocline, particularly during summer. Our results showed large seasonal differences in the noise level experienced by the seals. These results reveal the actual noise exposure by the animals and could help in marine spatial planning.     

Rural change and tourism in remote regions: Developments and Indigenous endeavour in Westland,Te Tai o Poutini,Aotearoa New Zealand

Remote rural areas have encountered significant change and the need for renegotiation of economic and social priorities in the late 20th and early 21st century. In our broader research, we ask how have such communities been responding to this change? What role have different organisations and agencies played? And, how have they acted on the aspirations of marginalised communities? In this paper we examine these issues through a case study of Westland District on the west coast of Aotearoa New Zealand's South Island. We probe the general shift towards prioritising tourism in the District, and highlight particular experiences in regard to Indigenous endeavour in tourism. We find that those engaged in leading local development and tourism have not collaborated strategically across the sector and have not established meaningful partnerships with the community that recognise both economic and socio‐cultural aspirations.