An Evaluation of Boundary-Layer Depth,Inversion and Entrainment Parameters by Large-Eddy Simulation

Studies of entrainment across the top of the boundary layer rely to a great extent on identification of the boundary-layer top, inversion properties, entrainment-zone depth, and the temporal changes in all of these. A variety of definitions and techniques have been used to provide automated and objective estimates; however, direct comparisons between studies is made difficult by the lack of consistency in techniques. Here we compare boundary-layer depth, entrainment-zone thickness, and entrainment rate derived from several commonly used techniques applied to a common set of large-eddy simulations of the idealized, dry, convective boundary layer. We focus in particular on those techniques applicable to lidar backscatter measurements of boundary-layer structure. We find significant differences in all the quantities of interest, and further that the behaviour as functions of common scaling parameters, such as convective Richardson number, also differ, sometimes dramatically. The discretization of the possible values of some quantities imposed by the vertical grid is found to affect some of the results even when changes to model resolution does not affect the entrainment rate or scaling behaviour. This is a particular problem where entrainment parameters are derived from a single mean profile (e.g. the buoyancy-flux profile), but not where they are derived from the statistical properties of large numbers of individual profiles (e.g. the probability distribution of the local boundary-layer top at each model grid point).     

An approach to the intercalibration of benthic ecological status assessment in the North Atlantic ecoregion, according to the European Water Framework Directive

The European Water Framework Directive (WFD) establishes a framework for the protection and improvement of transitional and coastal waters; its final objective is to achieve at least 'good water status' for all waters, by 2015. The WFD requires Member States (MSs) to assess the Ecological Status (ES) of water bodies. This assessment will be based upon the status of the biological, hydromorphological and physico-chemical quality elements, by comparing data obtained from monitoring networks to reference (undisturbed) conditions, and then deriving an Ecological Quality Ratio (EQR). One of the biological quality elements to be considered is the benthic invertebrate component and some structural parameters (composition, diversity and disturbance-sensitive taxa) must be included in the ES assessment. Following these criteria, several approaches to benthic invertebrate assessment have been proposed by MSs. The WFD requires that these approaches are intercalibrated. This contribution describes the comparison of the different methodologies proposed by United Kingdom, Spain, Denmark and Norway. Results show a high consistency between the approaches, both with regard to determining the EQR and boundary settings for the ES.     

广州小北路黑人聚居区社会空间分析

1978 年改革开放带来中国城市的快速转型。近年来, 针对经济转型背景下中国大城市 的社会空间研究很多, 但对在全球化影响下出现的跨国移民族裔聚居区的研究尚不多见。对 广州黑人聚居区展开研究, 以越秀区小北路为例, 探讨其社会空间特征与演进机制。研究采 用微观视角, 针对典型案例进行问卷调查和半结构式访谈。研究表明, 广州黑人聚居区与西 方同类族裔社会区存在诸多差异。小北路黑人聚居区因全球化下新的“自下而上”的跨国经 济联系而生, 因广州城市的商贸文化、宗教历史、贸易网络和地理气候条件而兴, 其跨国移 民多为来自西非地区的族裔散居者/ 漂泊者(Diaspora), 其人口构成异质多元, 且流动性强。 小北路的社会空间机制既包含被动隔离也包含主动聚居, 其经济形态已经开始向“族裔聚居 区经济”(ethnic enclave economy) 发展。     

Separation of Platinum from Palladium and Iridium in Iron Meteorites and Accurate High‐Precision Determination of Platinum Isotopes by Multi‐Collector ICP‐MS

This study presents a new measurement procedure for the isolation of Pt from iron meteorite samples. The method also allows for the separation of Pd from the same sample aliquot. The separation entails a two‐stage anion‐exchange procedure. In the first stage, Pt and Pd are separated from each other and from major matrix constituents including Fe and Ni. In the second stage, Ir is reduced with ascorbic acid and eluted from the column before Pt collection. Platinum yields for the total procedure were typically 50–70%. After purification, high‐precision Pt isotope determinations were performed by multi‐collector ICP‐MS. The precision of the new method was assessed using the IIAB iron meteorite North Chile. Replicate analyses of multiple digestions of this material yielded an intermediate precision for the measurement results of 0.73 for ε¹⁹²Pt, 0.15 for ε¹⁹⁴Pt and 0.09 for ε¹⁹⁶Pt (2 standard deviations). The NIST SRM 3140 Pt solution reference material was passed through the measurement procedure and yielded an isotopic composition that is identical to the unprocessed Pt reference material. This indicates that the new technique is unbiased within the limit of the estimated uncertainties. Data for three iron meteorites support that Pt isotope variations in these samples are due to exposure to galactic cosmic rays in space.     

Hillslope scale surface runoff,sediment and nutrient losses associated with tramline wheelings

Research on arable sandy loam and silty clay loam soils on 4° slopes in England has shown that tramlines (i.e. the unseeded wheeling areas used to facilitate spraying operations in cereal crops) can represent the most important pathway for phosphorus and sediment loss from moderately sloping fields. Detailed monitoring over the October–March period in winters 2005–2006 and 2006–2007 included event‐based sampling of surface runoff, suspended and particulate sediment, and dissolved and particulate phosphorus from hillslope segments (each ～300–800 m²) established in a randomized block design with four replicates of each treatment at each of two sites on lighter and heavier soils. Experimental treatments assessed losses from the cropped area without tramlines, and from the uncropped tramline area, and were compared to losses from tramlines which had been disrupted once in the autumn with a shallow tine. On the lighter soil, the effects of removal or shallow incorporation of straw residues was also determined. Research on both sandy and silty clay loam soils across two winters showed that tramline wheelings represented the dominant pathway for surface runoff and transport of sediment, phosphorus and nitrogen from cereal crops on moderate slopes. Results indicated 5·5–15·8% of rainfall lost as runoff, and losses of 0·8–2·9 kg TP ha^?1 and 0·3–4·8 t ha^?1 sediment in tramline treatments, compared to only 0·2–1·7% rainfall lost as runoff, and losses of 0·0–0·2 kg TP ha^?1 and 0·003–0·3 t ha^?1 sediment from treatments without tramlines or those where tramlines had been disrupted. The novel shallow disruption of tramline wheelings using a tine once following the autumn spray operation consistently and dramatically reduced (p < 0·001) surface runoff and loads of sediment, total nitrogen and total phosphorus to levels similar to those measured in cropped areas between tramlines. Results suggest that options for managing tramline wheelings warrant further refinement and evaluation with a view to incorporating them into spatially‐targeted farm‐level management planning using national or catchment‐based agri‐environment policy instruments aimed at reducing diffuse pollution from land to surface water systems. Copyright © 2010 John Wiley & Sons, Ltd.     

Depositional record of historic lahars in the upper Whangaehu Valley, Mt. Ruapehu, New Zealand: implications for trigger mechanisms, flow dynamics and lahar hazards

Mt. Ruapehu, in the central North Island of New Zealand, is one of the most lahar-prone volcanoes in the world. Since historic observations began in 1861 AD, more than 50 individual lahars have been recorded in the Whangaehu valley alone, the natural outlet to the summit Crater Lake. These lahars have been triggered by a variety of mechanisms, including explosive eruptions that displaced Crater Lake water over the outlet or ejected it onto the snow-clad summit area of the volcano; rain-remobilisation of tephra deposits on steep slopes; displacement over the outlet as a result of syn-eruptive changes in lake bathymetry; and lake break-outs from Crater Lake following impoundment of excess water behind temporary barriers of tephra and/or ice emplaced over the outlet. However, only 9 lahar deposits can be distinguished in the upper Whangaehu valley on sedimentological, stratigraphic, geomorphic and petrological grounds, and these are skewed towards either the largest or the most recent flows. In some cases magnitude can be reconstructed from deposit geometry, with the largest lahars producing the highest level terraces, the coarsest deposits, and crossing drainage divides into normally inactive channels. This under-representation of historic events reflects the low preservation potential of unconsolidated deposits in a steep alpine environment, and the overprinting and recycling effect of large magnitude lahars that rework material down to bedrock and effectively reset the stratigraphic record. Development of magnitude-frequency relationships for Ruapehu lahars therefore requires the identification of lahar deposits in proximal, medial and distal settings in order to ensure that the full range of events is represented.     

Numerical model studies on the generation and dissipation of the diurnal coastal-trapped waves over the Sakhalin shelf in the Sea of Okhotsk

To clarify the generation and dissipation mechanisms of diurnal coastal-trapped waves (CTWs) over the Sakhalin shelf, a series of numerical experiments were conducted using a three-dimensional tidal model of the Okhotsk Sea with density stratification. The tidal model used has good reproduction owing to the careful fitting to the recent observations. The numerical experiments suggested that diurnal CTWs are primarily (~60%) generated by the conversion of tidal energy at the northern corner of the Sakhalin shelf, and further amplified by vorticity generation due to the water column oscillation from Sakhalin Bay and the influence of Kashevarov Bank. From the observations, it was found that diurnal CTWs are effectively dissipated by the strong spin-down due to bottom friction. The conventional turbulent closure model cannot reproduce the observed damping of diurnal CTWs, which raises a caution in modeling the tidal fields in high-latitude regions where diurnal CTWs exist. To resolve this underestimation of the damping, the vertical eddy viscosity was parameterized using its dependence on the observed major axis length of the diurnal tidal current ellipses, which improves the model reproduction on the damping of diurnal CTWs. The model also suggests that the spin-down effects due to friction associated with the sea-ice cover play an important role in the tidal current reduction in the region where diurnal CTWs exist, as the observations suggested.     

A Forward Modeling Approach for Interpreting Impeller Flow Logs

A rigorous and practical approach for interpretation of impeller flow log data to determine vertical variations in hydraulic conductivity is presented and applied to two well logs from a Chalk aquifer in England. Impeller flow logging involves measuring vertical flow speed in a pumped well and using changes in flow with depth to infer the locations and magnitudes of inflows into the well. However, the measured flow logs are typically noisy, which leads to spurious hydraulic conductivity values where simplistic interpretation approaches are applied. In this study, a new method for interpretation is presented, which first defines a series of physical models for hydraulic conductivity variation with depth and then fits the models to the data, using a regression technique. Some of the models will be rejected as they are physically unrealistic. The best model is then selected from the remaining models using a maximum likelihood approach. This balances model complexity against fit, for example, using Akaike's Information Criterion.     

An Early Pliocene lake and its surrounding vegetation in Zhejiang,East China

The palynomorph composition of an Early Pliocene assemblage from Du’ao Lake, Zhejiang Province, East China, including sporomorphs and algae, was analyzed to reconstruct the vegetation and climate around the lake, as well as the environmental conditions in the lake. A subtropical evergreen and deciduous broad-leaved mixed forest surrounding the lake is inferred from the pollen data. The composition of the green algae community indicates a clear, shallow (about 5–6 m deep), mesotrophic freshwater lake. The inferred pH was about 7.0–8.0 during the algae growing season. Applying the Coexistence Approach, the climatic conditions in Early Pliocene Du’ao were: (1) mean annual temperature ranged from 18.1 to 22.0°C, (2) difference in temperature between the coldest and warmest months ranged from 14.2 to 15.1°C, (3) mean temperature of the coldest month varied from 10.7 to 12.1°C, (4) mean temperature of the warmest month ranged from 23.5 to 25.4°C, (5) mean annual precipitation varied from about 994 to 1,255 mm, (6) minimum monthly precipitation ranged from about 9 to 11 mm, and (7) maximum monthly precipitation varied from approximately 219 to 245 mm. These values indicate that the Early Pliocene climate was subtropical.     

Predicting road system speeds using spatial structure variables and network characteristics

Spatial regression is applied to GPS floating car measurements to build a predictive model of road system speed as a function of link type, time period, and spatial structure. The models correct for correlated spatial errors and autocorrelation of speeds. Correlation neighborhoods are based on either Euclidean or network distance. Econometric and statistical methods are used to choose the best model form and statistical neighborhood. Models of different types have different coefficient estimates and fit quality, which might affect inferences. Speed predictions are validated against a holdout sample to illustrate the usefulness of spatial regression in road system speed monitoring.