Comparative Assessment of Sludge Pre‐Treatment Techniques to Enhance Sludge Dewaterability and Biogas Production

Effectiveness of ultrasonication, microwave technologies, and enzyme addition prior to anaerobic digestion is investigated using sludge samples taken from the secondary settling tank of a domestic wastewater treatment plant to improve methane production, enhance dewaterability characteristics of the sludge, and to reduce excess sludge. Microwave pre‐treatment (1500 W, 10 min at 175 °C) results in better extra digester performance (compared to the control reactor) in terms of methane production (25 m³ ton^?1 suspended solids (SS)) than ultrasound (no improvement) and enzyme pre‐treatment (11 m³ ton^?1 SS). While methane production is not improved as a result of ultrasonication pre‐treatment (15 000 kJ kg^?1 SS), a noticeable increase (19%) is observed in the case of microwave pre‐treatment. Higher compactibility values are obtained after ultrasonication and microwave application compared to the control (i.e., from 7.1 to 8.7 and 9.2%, respectively) before anaerobic digestion. Although ultrasonication and microwave application decrease the dewaterability of the raw sludge (capillary suction time (CST) from 827 to 1364 and 2290 s, respectively), similar dewaterability results are obtained at the end of the anaerobic digestion process for all pre‐treated sludge samples. An economic assessment of this study shows that pre‐treatment with microwave results in more than 10‐fold less net cost compared to the enzyme application.     

Automatic urban building boundary extraction from high resolution aerial images using an innovative model of active contours

To present a new method for building boundary detection and extraction based on the active contour model, is the main objective of this research. Classical models of this type are associated with several shortcomings; they require extensive initialization, they are sensitive to noise, and adjustment issues often become problematic with complex images. In this research a new model of active contours has been proposed that is optimized for the automatic building extraction. This new active contour model, in comparison to the classical ones, can detect and extract the building boundaries more accurately, and is capable of avoiding detection of the boundaries of features in the neighborhood of buildings such as streets and trees. Finally, the detected building boundaries are generalized to obtain a regular shape for building boundaries. Tests with our proposed model demonstrate excellent accuracy in terms of building boundary extraction. However, due to the radiometric similarity between building roofs and the image background, our system fails to recognize a few buildings.     

Flood risk perception and its determinants among rural households in two communities in Khyber Pakhtunkhwa,Pakistan

Natural Hazards - Risk perception plays a vital part in flood risk management and mitigation strategies. Therefore, this study aims at first to measure the risk perception of the vulnerable...     

Factors associated with unnecessary requests for an ambulance by non-traumatic patients after the acute earthquake responding phase: a qualitative content analysis

The pre-hospital emergency staff played a key role in transferring the injured patients to health centers. Usually, they reported changes in their decisions on the transfer of non-traumatic patients to hospitals. So, this study was aimed to explore the reasons for unnecessarily requesting an ambulance by non-traumatic patients after the acute responding-to-earthquake phase. This study was a qualitative study that data were analyzed by content analysis approach. Participants were eleven pre-hospital emergency technicians. Data were collected by three sessions of focus group discussion. Data analysis was led to emergence of a main theme: “feeling urgency due to turmoil and uncertainty.” This theme illustrates the basic approach of the inhabitants of the earthquake-stricken region when unnecessarily requesting an ambulance. This theme was derived from two main categories of “turbulent and uncertain conditions” and “psychological turmoil.” The category of “turbulent and uncertain conditions” was comprised of three subcategories: “unreliable care,” “inadequate facilities” and “turbulent living conditions.” The category of “psychological turmoil” was comprised of three subcategories: “psychological turmoil in survivors,” “healthcare providers deciding under pressure” and “turmoil in providing psychological and psychiatric services.” Ambulance dispatch may be unnecessarily performed owing to turbulent and unsure conditions and psychological turmoil in earthquake-stricken people and pre-hospital emergency staff. Providing earthquake-stricken people with psycho-medical services in their place of residence can significantly reduce the workload of pre-hospital emergency staff and consequently that of hospital staff and therefore save time and treatment costs and increase the quality of health services provided for the injured.

     

Quantitative Analysis and Efficiency Assessment of Floodwater Harvesting System in Arid Region: Case of Touzouz ephemeral stream—Mzab Valley

Water Resources - The Mzab Valley is characterized by an arid climate with limited amounts of rainfall. In the context of water scarcity, the Mzab water management system recovers floodwater for...     

Relative quantification of wind erosion in argan woodlands in the Souss Basin,Morocco

The endemic argan woodlands cover large parts of South Morocco and create a characteristic landscape with areas of sparsely vegetated and bare soil surfaces between single trees. This unique ecosystem has been under extensive agrosilvopastoral management for centuries and is now at risk of degradation caused by overgrazing and increasing scarcity and variability of rainfall. To investigate susceptibility to wind erosion, we conducted an experimental–empirical study including wind tunnel tests and a drone-generated digital elevation model and quantified wind-erodible material on five different associated surface types by means of sediment catchers. The highest emission flux was measured on freshly ploughed surfaces (1875 g m^–2 h^–1), while older ploughed areas with a re-established crust produced a much lower emission flux (795 g m^–2 h^–1). Extensive tillage may have been a sustainable practice for generations, but increasing drought and uncertainty of rainfall now lead to an acute risk of severe soil erosion and dust production. The typical crusted surfaces characterized by residual rock fragment accumulation and wash processes produced the second highest emission flux (1,354 g m^–2 h^–1). Material collected from tree-shaded areas (933 g m^–2 h^–1) was revealed to be a considerable source of organic material, possibly affecting substrate conditions positively on a larger regional scale. The lowest flux was measured on rock fragment-covered surfaces (301 g m^–2 h^–1). The data show that open argan woodland may be a considerable source for wind erosion and dust production, depending on surface characteristics strongly related to management. An adapted management must include the conservation of argan trees to offer a promising approach to prevent severe wind erosion and dust production and mitigate possible impacts of land-use change and climate change related shifts in wind and rainfall patterns. © 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd     

Holocene climate forcings and lacustrine regime shifts in the Indian summer monsoon realm

Extreme climate events have been identified both in meteorological and long-term proxy records from the Indian summer monsoon (ISM) realm. However, the potential of palaeoclimate data for understanding mechanisms triggering climate extremes over long time scales has not been fully exploited. A distinction between proxies indicating climate change, environment, and ecosystem shift is crucial for enabling a comparison with forcing mechanisms (e.g. El-Niño Southern Oscillation). In this study we decouple these factors using data analysis techniques [multiplex recurrence network (MRN) and principal component analyses (PCA)] on multiproxy data from two lakes located in different climate regions – Lonar Lake (ISM dominated) and the high-altitude Tso Moriri Lake (ISM and westerlies influenced). Our results indicate that (i) MRN analysis, an indicator of changing environmental conditions, is associated with droughts in regions with a single climate driver but provides ambiguous results in regions with multiple climate/environmental drivers; (ii) the lacustrine ecosystem was ‘less sensitive’ to forcings during the early Holocene wetter periods; (iii) archives in climate zones with a single climate driver were most sensitive to regime shifts; (iv) data analyses are successful in identifying the timing of onset of climate change, and distinguishing between extrinsic and intrinsic (lacustrine) regime shifts by comparison with forcing mechanisms. Our results enable development of conceptual models to explain links between forcings and regional climate change that can be tested in climate models to provide an improved understanding of the ISM dynamics and their impact on ecosystems. © 2020 John Wiley & Sons, Ltd.     

Optimal Location of Wells for Storage and Recovery of Surplus Desalinated Water in Coastal Aquifers

Storage of water in aquifers using injection wells is an efficient way for utilizing excess desalinated water in arid regions. In this investigation we estimate the benefits of optimally recharging seasonal surplus desalinated water into a strategic coastal aquifer already benefitting from natural recharge of flash-floods water by a recharge dam. Since, usually the buyers of desalinated water commit to purchase surplus desalinated water under take-or-pay contracts, any attempt in utilizing the paid water is beneficial. Coastal cities are observing an increased urbanization leaving limited space for aquifer recharge infrastructure. In order to determine the optimal location of wells and maximize the use of surplus desalinated water available in winter period, a decision tool combining a numerical groundwater flow simulation model (MODFLOW) with an optimization model is developed. The results of this study show that increasing the number of wells from the existing 45 wells to 173 would allow storing 31.4 million cubic meter per year of excess desalinated water into the aquifer that can be used during later during summer months. The net benefit would reach US$55 million/year while the cost of drilling the new wells is US$5.11 million.     

Three-parameter Radon transform in layered transversely isotropic media

Radon transform is a powerful tool with many applications in different stages of seismic data processing, because of its capability to focus seismic events in the transform domain. Three-parameter Radon transform can optimally focus and separate different seismic events, if its basis functions accurately match the events. In anisotropic media, the conventional hyperbolic or shifted hyperbolic basis functions lose their accuracy and cannot preserve data fidelity, especially at large offsets. To address this issue, we propose an accurate traveltime approximation for transversely isotropic media with vertical symmetry axis, and derive two versions of Radon basis functions, time-variant and time-invariant. A time-variant basis function can be used in time domain Radon transform algorithms while a time-invariant version can be used in, generally more efficient, frequency domain algorithms. Comparing the time-variant and time-invariant Radon transform by the proposed basis functions, the time-invariant version can better focus different seismic events; it is also more accurate, especially in presence of vertical heterogeneity. However, the proposed time-invariant basis functions are suitable for a specific type of layered anisotropic media, known as factorized media. We test the proposed methods and illustrate successful applications of them for trace interpolation and coherent noise attenuation.     

Research note: deblended-data reconstruction using generalized blending and deblending models

We introduce a concept of generalized blending and deblending, develop its models and accordingly establish a method of deblended-data reconstruction using these models. The generalized models can handle real situations by including random encoding into the generalized operators both in the space and time domain, and both at the source and receiver side. We consider an iterative optimization scheme using a closed-loop approach with the generalized blending and deblending models, in which the former works for the forward modelling and the latter for the inverse modelling in the closed loop. We applied our method to existing real data acquired in Abu Dhabi. The results show that our method succeeded to fully reconstruct deblended data even from the fully generalized, thus quite complicated blended data. We discuss the complexity of blending properties on the deblending performance. In addition, we discuss the applicability to time-lapse seismic monitoring as it ensures high repeatability of the surveys. Conclusively, we should acquire blended data and reconstruct deblended data without serious problems but with the benefit of blended acquisition.