Uncertainty assessment of ephemeral gully identification,characteristics and topographic threshold when using aerial photographs in agricultural settings

Manual digitizing on aerial photographs is still commonly used for characterizing gully erosion over large areas. Even when automated detection procedures are implemented, manual digitizing is frequently being resorted to in order to constitute reference datasets used for training and validation. In both cases, manual digitizing entails some subjective decisions on behalf of the operator, which introduces uncertainty into the resulting datasets. To assess the magnitude of this uncertainty, 11 experienced operators were asked to digitize and classify ephemeral gullies (EGs) on cropland following a standardized methodology. The resulting 11 datasets were compared in terms of number, type and location of EGs. Furthermore, for EGs located on a well‐defined runoff flow concentration axis, the slope versus contributing area topographic thresholds required for initiating gully channels were assessed using four thresholding methods, and compared across the 11 datasets. The operators identified 259 different EGs. However, the number (52–139) and sum total length (8.9–23.7 km) of EGs varied widely across operators. Only 34% of the EGs were digitized by more than half of the operators, and 7% were identified by all. Identification of EGs located on a well‐defined flow concentration axis proved least subjective. The longer the EG and the more fields the EG crossed, the larger the number of operators that were able to identify it. EGs were also most easily identified when located in sugar beet fields as compared to other crops. EG classification and topographic threshold lines were also found to be strongly operator‐dependent. Quantile regression appeared to be one of the most robust thresholding methods. Operator subjectivity when digitizing EGs on orthophotographs introduces uncertainty that should be taken into account in future remote sensing‐based studies of EG erosion whenever they rely, in part or in full, on manual photograph interpretation. Copyright © 2014 John Wiley & Sons, Ltd.     

Occurrence and Resistance of Pathogenic Bacteria Along the Tietê River Downstream of São Paulo in Brazil

The load of pathogenic bacteria, their fate and their dangerousness in the Tietê River were assessed along 100 km starting from the city of São Paulo, Brazil. The data were compared with those from two German rivers. High loads of pathogens were found in the Tietê River near the city of São Paulo (Escherichia coli O157:H7, Shigella flexneri, and Shigella boydii), which were absent 30 km downstream of São Paulo. The antibiotic resistances observed in the Tietê river were rather low and decreased after the major input in São Paulo to significantly lower levels about 30 km downstream. While the Brazilian isolates were more susceptible for ampicillin than the German ones, the reverse was observed for gentamycin. For optimal control of infections in humans critical areas where these bacteria survived longer and their elimination mechanisms should be identified as well as the extent and the origin of antibiotic resistance should be determined.     

Development of a rain‐on‐snow detection algorithm using passive microwave radiometry

Currently observed climate warming in the Arctic has numerous consequences. Of particular relevance, the precipitation regime is modified where mixed and liquid precipitation can occur during the winter season leading to rain‐on‐snow (ROS) events. This phenomenon is responsible for ice crust formation, which has a significant impact on ecosystems (such as biological, hydrological, ecological and physical processes). The spatially and temporally sporadic nature of ROS events makes the phenomenon difficult to monitor using meteorological observations. This paper focuses on the detection of ROS events using passive microwave (PMW) data from a modified brightness temperature (T_B) gradient approach at 19 and 37 GHz. The approach presented here was developed empirically for observed ROS events with coincident ground‐based PMW measurements in Sherbrooke, Quebec, Canada. It was then tested in Nunavik, Quebec, with the Advanced Microwave Scanning Radiometer for the Earth Observing System (AMSR‐E). We obtained a detection accuracy of 57, 71 and 89% for ROS detection for three AMSR‐E grid cells with a maximum error of 7% when considering all omissions and commissions with regard to the total number of AMSR‐E passes throughout the winter period. Copyright © 2016 John Wiley & Sons, Ltd.     

An Analysis Platform for Multiscale Hydrogeologic Modeling with Emphasis on Hybrid Multiscale Methods

One of the most significant challenges faced by hydrogeologic modelers is the disparity between the spatial and temporal scales at which fundamental flow, transport, and reaction processes can best be understood and quantified (e.g., microscopic to pore scales and seconds to days) and at which practical model predictions are needed (e.g., plume to aquifer scales and years to centuries). While the multiscale nature of hydrogeologic problems is widely recognized, technological limitations in computation and characterization restrict most practical modeling efforts to fairly coarse representations of heterogeneous properties and processes. For some modern problems, the necessary level of simplification is such that model parameters may lose physical meaning and model predictive ability is questionable for any conditions other than those to which the model was calibrated. Recently, there has been broad interest across a wide range of scientific and engineering disciplines in simulation approaches that more rigorously account for the multiscale nature of systems of interest. In this article, we review a number of such approaches and propose a classification scheme for defining different types of multiscale simulation methods and those classes of problems to which they are most applicable. Our classification scheme is presented in terms of a flowchart (Multiscale Analysis Platform), and defines several different motifs of multiscale simulation. Within each motif, the member methods are reviewed and example applications are discussed. We focus attention on hybrid multiscale methods, in which two or more models with different physics described at fundamentally different scales are directly coupled within a single simulation. Very recently these methods have begun to be applied to groundwater flow and transport simulations, and we discuss these applications in the context of our classification scheme. As computational and characterization capabilities continue to improve, we envision that hybrid multiscale modeling will become more common and also a viable alternative to conventional single‐scale models in the near future.     

Divergence of solutions to perturbation-based advection-dispersion moment equations

Moment equation methods are popular and powerful tools for modeling transport processes in randomly heterogeneous porous media, but the application of these methods to advection-dispersion equations often leads to erroneous oscillations. Perturbative methods, required to close systems of moment equations, become inaccurate for large perturbations; however, little quantitative theory exists for determining when this occurs for advection-dispersion equations. We consider three different methods (asymptotic approximation, Eulerian truncation, and iterative solution) for closing and solving advection-dispersion moment equations describing transport in stratified porous media with random permeability. We obtain approximate analytical expressions for time above which the asymptotic approximation to the mean diverges, in particular quantifying the impact that dispersion has on delaying—but not eliminating—divergence. We demonstrate that Eulerian truncation and iterative solution methods do not eliminate divergent behavior either. Our divergence criteria provide a priori estimates that signal a warning to the practitioner of stochastic advection-dispersion equations to carefully consider whether to apply perturbative approaches.     

Pore scale modeling of immiscible and miscible fluid flows using smoothed particle hydrodynamics

A numerical model based on smoothed particle hydrodynamics (SPH) was developed and used to simulate immiscible and miscible fluid flows in porous media and to study effects of pore scale heterogeneity and anisotropy on such flows.     

A methodology for regionalizing 3‐D effective porosity at watershed scale in crystalline aquifers

An innovative approach for regionalizing the 3‐D effective porosity field is presented and applied to two large, overexploited, and deeply weathered crystalline aquifers located in southern India. The method derives from earlier work on regionalizing a 2‐D effective porosity field in that part of an aquifer where the water table fluctuates, which is now extended over the entire aquifer using a 3‐D approach. A method based on geological and geophysical surveys has also been developed for mapping the weathering profile layers (saprolite and fractured layers). The method for regionalizing 3‐D effective porosity combines water table fluctuation and groundwater budget techniques at various cell sizes with the use of satellite‐based data (for groundwater abstraction), the structure of the weathering profile, and geostatistical techniques. The approach is presented in detail for the Kudaliar watershed (983 km²) and tested on the 730 km² Anantapur watershed. At watershed scale, the effective porosity of the aquifer ranges from 0.5% to 2% in Kudaliar and between 0.3% and 1% in Anantapur, which agrees with earlier works. Results show that (a) depending on the geology and on the structure of the weathering profile, the vertical distribution of effective porosity can be very different and that the fractured layers in crystalline aquifers are not necessarily characterized by a rapid decrease in effective porosity and (b) that the lateral variations in effective porosity can be larger than the vertical ones. These variations suggest that within a same weathering profile, the density of open fractures and/or degree of weathering in the fractured zone may significantly vary from a place to another. The proposed method provides information on the spatial distribution of effective porosity that is of prime interest in terms of flux and contaminant transport in crystalline aquifers. Implications for mapping groundwater storage and scarcity are also discussed, which should help in improving groundwater resource management strategies.     

Estimating River Conductance from Prior Information to Improve Surface‐Subsurface Model Calibration

Most groundwater models simulate stream‐aquifer interactions with a head‐dependent flux boundary condition based on a river conductance (CRIV). CRIV is usually calibrated with other parameters by history matching. However, the inverse problem of groundwater models is often ill‐posed and individual model parameters are likely to be poorly constrained. Ill‐posedness can be addressed by Tikhonov regularization with prior knowledge on parameter values. The difficulty with a lumped parameter like CRIV, which cannot be measured in the field, is to find suitable initial and regularization values. Several formulations have been proposed for the estimation of CRIV from physical parameters. However, these methods are either too simple to provide a reliable estimate of CRIV, or too complex to be easily implemented by groundwater modelers. This paper addresses the issue with a flexible and operational tool based on a 2D numerical model in a local vertical cross section, where the river conductance is computed from selected geometric and hydrodynamic parameters. Contrary to other approaches, the grid size of the regional model and the anisotropy of the aquifer hydraulic conductivity are also taken into account. A global sensitivity analysis indicates the strong sensitivity of CRIV to these parameters. This enhancement for the prior estimation of CRIV is a step forward for the calibration and uncertainty analysis of surface‐subsurface models. It is especially useful for modeling objectives that require CRIV to be well known such as conjunctive surface water‐groundwater use.     

Long‐term sediment yield from a small catchment in southern Brazil affected by land use and soil management changes

Sediments produced from eroding cultivated land can cause on‐site and off‐site effects that cause considerable economic and social impacts. Despite the importance of soil conservation practices (SCP) for the control of soil erosion and improvements in soil hydrological functions, limited information is available regarding the effects of SCP on sediment yield (SY) at the catchment scale. This study aimed to investigate the long‐term relationships between SY and land use, soil management, and rainfall in a small catchment. To determine the effects of anthropogenic and climatic factors on SY, rainfall, streamflow, and suspended sediment concentration were monitored at 10‐min intervals for 14 years (2002–2016), and the land use and soil management changes were surveyed annually. Using a statistical procedure to separate the SY effects of climate, land use, and soil management, we observed pronounced temporal effects of land use and soil management changes on SY. During the first 2 years (2002–2004), the land was predominantly cultivated with tobacco under a traditional tillage system (no cover crops and ploughed soil) using animal traction. In that period, the SY reached approximately 400 t·km^?2·year^?1. From 2005 to 2009, a soil conservation programme introduced conservation tillage and winter cover crops in the catchment area, which lowered the SY to 50 t·km^?2·year^?1. In the final period (2010–2016), the SCP were partially abandoned by farmers, and reforested areas increased, resulting in an SY of 150 t·km^?2·year^?1. This study also discusses the factors associated with the failure to continue using SCP, including structural support and farmer attitudes.