Frontier Mountain 93001: A coarse‐grained,enstatite‐augite‐oligoclase‐rich,igneous rock from the acapulcoite‐lodranite parent asteroid

Abstract— The Frontier Mountain (FRO) 93001 meteorite is a 4.86 g fragment of an unshocked, medium‐ to coarse‐grained rock from the acapulcoite‐lodranite (AL) parent body. It consists of anhedral orthoenstatite (Fs_{13.3 ± 0.4}Wo_{3.1 ± 0.2}), augite (Fs_{6.1 ± 0.7}Wo_{42.3 ± 0.9}; Cr₂O₃ = 1.54 ± 0.03), and oligoclase (Ab_{80.5 ± 3.3}Or_{3.1 ± 0.6}) up to >1 cm in size enclosing polycrystalline aggregates of fine‐grained olivine (average grain size: 460 ± 210 μm) showing granoblastic textures, often associated with Fe,Ni metal, troilite, chromite (cr# = 0.91 ± 0.03; fe# = 0.62 ± 0.04), schreibersite, and phosphates. Such aggregates appear to have been corroded by a melt. They are interpreted as lodranitic xenoliths. After the igneous (the term “igneous” is used here strictly to describe rocks or minerals that solidified from molten material) lithology intruding an acapulcoite host in Lewis Cliff (LEW) 86220, FRO 93001 is the second‐known silicate‐rich melt from the AL parent asteroid. Despite some similarities, the silicate igneous component of FRO 93001 (i.e., the pyroxene‐plagioclase mineral assemblage) differs in being coarser‐grained and containing abundant enstatite. Melting‐crystallization modeling suggests that FRO 93001 formed through high‐degree partial melting (≥35 wt%; namely, ≥15 wt% silicate melting and ?20 wt% metal melting) of an acapulcoitic source rock, or its chondritic precursor, at temperatures ≥1200 °C, under reducing conditions. The resulting magnesium‐rich silicate melt then underwent equilibrium crystallization; prior to complete crystallization at ?1040 °C, it incorporated lodranitic xenoliths. FRO 93001 is the highest‐temperature melt from the AL parent‐body so far available in laboratory. The fact that FRO 93001 could form by partial melting and crystallization under equilibrium conditions, coupled with the lack of quench‐textures and evidence for shock deformation in the xenoliths, suggests that FRO 93001 is a magmatic rock produced by endogenic heating rather than impact melting.     

Isotope geochemistry of Pantelleria volcanic fluids, Sicily Channel rift: a mantle volatile end-member for volcanism in southern Europe

Chemical and isotopic ratio (He, C, H and O) analysis of hydrothermal manifestations on Pantelleria island, the southernmost active volcano in Italy, provides us with the first data upon mantle degassing through the Sicily Channel rift zone, south of the African–European collision plate boundary. We find that Pantelleria fluids contain a CO₂–He-rich gas component of mantle magmatic derivation which, at shallow depth, variably interacts with a main thermal (100°C) aquifer of mixed marine–meteoric water. The measured ³He/⁴He ratios and δ¹³C of both the free gases (4.5–7.3 R_a and −5.8 to −4.2‰, respectively) and dissolved helium and carbon in waters (1.0–6.3 R_a and −7.1 to −0.9‰), together with their covariation with the He/CO₂ ratio, constrain a ³He/⁴He ratio of 7.3±0.1 R_a and a δ¹³C of ca. −4‰ for the magmatic end-member. These latter are best preserved in fluids emanating inside the active caldera of Pantelleria, in agreement with a higher heat flow across this structure and other indications of an underlying crustal magma reservoir. Outside the caldera, the magmatic component is more affected by air dilution and, at a few sites, by mixing with either organic carbon and/or radiogenic ⁴He leached from the U–Th-rich trachytic host rocks of the aquifer. Pantelleria magmatic end-member is richer in ³He and has a lower (closer to MORB) δ¹³C than all fluids yet analyzed in volcanic regions of Italy and southern Europe, including Mt. Etna in Sicily (6.9±0.2 R_a, δ¹³C=−3±1‰). This observation is consistent with a south to north increasing imprint of subducted crustal material in the products of Italian volcanoes, whose He and C (but also O and Sr) isotopic ratios gradually evolve towards crustal values northward of the African–Eurasian plate collision boundary. Our results for Pantelleria extend this regional isotopic pattern further south and suggest the presence of a slightly most pristine or ‘less contaminated’, ³He-richer mantle source beneath the Sicily Channel rift zone. The lower than MORB ³He/⁴He ratio but higher than MORB CO₂/³He ratio of Pantelleria volatile end-member are compatible with petro-geochemical evidence that this mantle source includes an upwelling HIMU–EM1-type asthenospheric plume component whose origin, according to recent seismic data, may be in the lower mantle.     

Geological constraints for earthquake faulting studies in the Colfiorito area (central Italy)

On September 26, 1997, at 00.33 h(GMT), a Mw 5.7 earthquake occurred in the axial zone of theUmbria-Marche Apennines of central Italy, in the Colfiorito basin area. At09.40 h (GMT), a M_w 6.0 earthquake again struck the area withinthe Colfiorito basin, a major intramontane basin filled with Quaternarycontinental deposits. The two main shocks, and the associated aftershockswere within a roughly NNW-SSE trending zone of largest damage (Imax10), in which ground deformation has been observed. Along this trend,Cello et al. (1997a) had mapped a few capable faults, showingtranstensional to pure extensional kinematics. Field inspection of themapped faults, carried out after the main shocks, revealed that some ofthem were locally reactivated (for lengths of several hundreds metres andsurface slip in the range of 2–8 cm) during the September 26, 1997earthquakes.     

Time evolution of complex networks: commuting systems in insular Italy

The aim of this paper is to study the dynamics of the commuting system of two insular regions of Italy, Sardinia and Sicily, inspected as complex networks. The authors refer to a 20-year time period and take into account three census data sets about the work and study-driven inter-municipal origin-destination movements of residential inhabitants in 1981, 1991 and 2001. Since it is likely that the number of municipalities (in this case, the vertices of the system) does not display sharp variations, the authors direct the study to the variation of the properties emerging through both a topological and a weighted network representation of commuting in the time periods indicated.     

On the Need for Reliable Seismic Input Assessment for Optimized Design and Retrofit of Seismically Isolated Civil and Industrial Structures, Equipment, and Cultural Heritage

Based on the experience of recent violent earthquakes, the limits of the methods that are currently used for the definition of seismic hazard are becoming more and more evident to several seismic engineers. Considerable improvement is felt necessary not only for the seismic classification of the territory (for which the probabilistic seismic hazard assessment??PSHA??is generally adopted at present), but also for the evaluation of local amplification. With regard to the first item, among others, a better knowledge of fault extension and near-fault effects is judged essential. The aforesaid improvements are particularly important for the design of seismically isolated structures, which relies on displacement. Thus, such a design requires an accurate definition of the maximum value of displacement corresponding to the isolation period, and a reliable evaluation of the earthquake energy content at the low frequencies that are typical of the isolated structures, for the site and ground of interest. These evaluations shall include possible near-fault effects even in the vertical direction; for the construction of high-risk plants and components and retrofit of some cultural heritage, they shall be performed for earthquakes characterized by very long return periods. The design displacement shall not be underestimated, but neither be excessively overestimated, at least when using rubber bearings in the seismic isolation (SI) system. In fact, by decreasing transverse deformation of such SI systems below a certain value, their horizontal stiffness increases. Thus, should a structure (e.g. a civil defence centre, a masterpiece, etc.) protected in the aforesaid way be designed to withstand an unnecessarily too large earthquake, the behaviour of its SI system will be inadequate (i.e. it will be too stiff) during much more frequent events, which may really strike the structure during its life. Furthermore, since SI can be used only when the room available to the structure laterally is sufficient to create a structural gap compatible with the design displacement, overestimating this displacement may lead to unnecessarily renouncing of the use of such a very efficient method, especially in the case of retrofits of existing buildings. Finally, for long structures (e.g. several bridges or viaducts and even some buildings) an accurate evaluation of the possibly different ground displacements along the structure is required (this also applies to conventionally built structures). In order to overcome the limits of PSHA, this method shall be complemented by the development and application of deterministic models. In particular, the lack of displacement records requires the use of modelling, once they are calibrated against more commonly available velocity or acceleration records. The aforesaid remarks are now particularly important in the P.R. China and Italy, to ensure safe reconstruction after the Wenchuan earthquake of May 12, 2008 and the Abruzzo earthquake of April 6, 2009: in fact, wide use of SI and other anti-seismic systems has been planned in the areas struck by both events.     

On the crystal chemistry and elastic behavior of a phlogopite 3<Emphasis Type="Italic">T</Emphasis>

The crystal chemistry and the elastic behavior under isothermal conditions up to 9 GPa of a natural, and extremely rare, 3T-phlogopite from Traversella (Valchiusella, Turin, Western Alps) [(K_0.99Na_0.05Ba_0.01)(Mg_2.60Al_0.20Fe _0.21 ²⁺ )[Si_2.71Al_1.29O₁₀](OH)₂, space group P3₁12, with a = 5.3167(4), c = 30.440(2) Å, and V = 745.16(9) ų] have been investigated by electron microprobe analysis in wavelength dispersion mode, single-crystal X-ray diffraction at 100 K, and in situ high-pressure synchrotron radiation powder diffraction (at room temperature) with a diamond anvil cell. The single-crystal refinement confirms the general structure features expected for trioctahedral micas, with the inter-layer site partially occupied by potassium and sodium, iron almost homogeneously distributed over the three independent octahedral sites, and the average bond distances of the two unique tetrahedra suggesting a disordered Si/Al-distribution (i.e., 〈T1-O〉 ~ 1.658 and 〈T2-O〉 ~ 1.656 Å). The location of the H-site confirms the orientation of the O–H vector nearly perpendicular to (0001). The refinement converged with R ₁(F) = 0.0382, 846 unique reflections with F _O > 4σ(F _O) and 61 refined parameters, and not significant residuals in the final difference-Fourier map of the electron density (+0.77/?0.37 e ^?/ų). The high-pressure experiments showed no phase transition within the pressure range investigated. The P–V data were fitted with a Murnaghan (M-EoS) and a third-order Birch-Murnaghan equation of state (BM-EoS), yielding: (1) M-EoS, V ₀ = 747.0(3) ų, K _T0 = 44.5(24) GPa, and K′ = 8.0(9); (2) BM-EoS, V ₀ = 747.0(3) ų, K _T0 = 42.8(29) GPa, and K′ = 9.9(17). A comparison between the elastic behavior in response to pressure observed in 1M- and 3T-phlogopite is made.