Considerations on the magnitude distributions of the Kuiper belt and of the Jupiter Trojans

By examining the absolute magnitude (H) distributions (hereafter HD) of the cold and hot populations in the Kuiper belt and of the Trojans of Jupiter, we find evidence that the Trojans have been captured from the outer part of the primordial trans-neptunian planetesimal disk. We develop a sketch model of the HDs in the inner and outer parts of the disk that is consistent with the observed distributions and with the dynamical evolution scenario known as the ‘Nice model’. This leads us to predict that the HD of the hot population should have the same slope of the HD of the cold population for 6.5<H<9, both as steep as the slope of the Trojans' HD. Current data partially support this prediction, but future observations are needed to clarify this issue. Because the HD of the Trojans rolls over at H∼9 to a collisional equilibrium slope that should have been acquired when the Trojans were still embedded in the primordial trans-neptunian disk, our model implies that the same roll-over should characterize the HDs of the Kuiper belt populations, in agreement with the results of Bernstein et al. [Bernstein, G.M., and 5 colleagues, 2004. Astron. J. 128, 1364-1390] and Fuentes and Holman [Fuentes, C.I., Holman, M.J., 2008. Astron. J. 136, 83-97]. Finally, we show that the constraint on the total mass of the primordial trans-neptunian disk imposed by the Nice model implies that it is unlikely that the cold population formed beyond 35 AU.     

Assessing the influence of climate model uncertainty on EU-wide climate change impact indicators

Despite an increasing understanding of potential climate change impacts in Europe, the associated uncertainties remain a key challenge. In many impact studies, the assessment of uncertainties is underemphasised, or is not performed quantitatively. A key source of uncertainty is the variability of climate change projections across different regional climate models (RCMs) forced by different global circulation models (GCMs). This study builds upon an indicator-based NUTS-2 level assessment that quantified potential changes for three climate-related hazards: heat stress, river flood risk, and forest fire risk, based on five GCM/RCM combinations, and non-climatic factors. First, a sensitivity analysis is performed to determine the fractional contribution of each single input factor to the spatial variance of the hazard indicators, followed by an evaluation of uncertainties in terms of spread in hazard indicator values due to inter-model climate variability, with respect to (changes in) impacts for the period 2041–70. The results show that different GCM/RCM combinations lead to substantially varying impact indicators across all three hazards. Furthermore, a strong influence of inter-model variability on the spatial patterns of uncertainties is revealed. For instance, for river flood risk, uncertainties appear to be particularly high in the Mediterranean, whereas model agreement is higher for central Europe. The findings allow for a hazard-specific identification of areas with low vs. high model agreement (and thus confidence of projected impacts) within Europe, which is of key importance for decision makers when prioritising adaptation options.     

Experimental Evidences of the Effect of Fibres in Reinforcing a Sandy Gravel

Studies regarding fibre-reinforcement are restricted to clays, silty and sandy soils. No information is available on gravels. It is worth checking the effect of randomly oriented discrete fibres also on such soils to see if they can be beneficial and to get a better insight into the grain to soil interaction mechanism. In this paper, the effect of a small amount of fibres having high aspect ratio on a sandy gravel was analysed by means of tests carried out in a large triaxial apparatus. Specimens of both natural and fibre-reinforced sandy gravel were prepared by wet tamping at different relative densities, and were tested along monotonic and cyclic stress paths. The results show that the addition of a small amount of fibres causes a slight increase in peak strength and a larger increase in ultimate strength at small confining stress, with an overall more ductile behaviour. The cyclic tests at small confining stress and intermediate strain levels show that, for the lowest applied strain (of the order of 10⁻²%), the stiffness was larger for the reinforced specimens, with a much sharper decrease at larger strains and final values similar for the reinforced and non-reinforced materials.     

New developments with design and construction of a thermal/vacuum qualified photogrammetric system

In the frame of the development of a photogrammetric system to be used in thermal/vacuum chambers at the European Space Research and Technology Centre (ESTEC) of European Space Agency (ESA) and other sites across Europe, the design of a network using micro-cameras was specified by ESA-ESTEC. A thermal/vacuum qualified photogrammetric system, which is able to work and acquire images in vacuum and at cryo-temperatures, was constructed by ESA-ESTEC Test Centre Division. The current system uses four space qualified one-mega pixel cameras and is able to measure large space structures in vacuum and at temperatures down to ?170 ^°C with a global accuracy better than 1 part per 100,000 in object space. Several tests aiming at the qualification of the sensors and system in terms of operation and accuracy have been carried out. Special measures have been developed and special attention has been taken into account specifically for the first application of the photogrammetric system. It is to verify the ESA’s Herschel Telescope Flight Model alignment positioning.     

Identifying rift zones on volcanoes: an example from La Réunion island,Indian Ocean

We describe a methodology for identifying complex rift zones on recent or active volcanoes, where structures hidden by recent deposits and logistical conditions might prevent carrying out detailed fieldwork. La Réunion island was chosen as a test-site. We used georeferenced topographic maps, aerial photos and digital terrain models to perform a statistical analysis of several morphometric parameters of pyroclastic cones. This provides a great deal of geometric information that can help in distinguishing the localisation and orientation of buried magma-feeding fractures, which constitute the surface expression of rift zones. It also allowed the construction of a complete GIS database of the pyroclastic cones. La Réunion is a perfect example where past and active volcanic rift zones are mostly expressed by clusters of monogenic centres. The data has been validated in the field and compared and integrated with the distribution and geometry of dyke swarms. Results show the presence of several main and secondary rift segments of different ages, locations and orientations, whose origin is discussed considering regional tectonics, local geomorphology, and volcano deformation.     

Biosedimentary record of postglacial coastal dynamics: high‐resolution sequence stratigraphy from the northern Tuscan coast (Italy)

Integrating analysis of the benthic palaeoecological record with multivariate ordination techniques represents a powerful synergy able to provide an improved characterization of coastal depositional facies in a sequence stratigraphical perspective. Through quantitative analysis of benthic foraminifer, ostracod and mollusc associations from the postglacial succession of Core M3 (Arno coastal plain, Tuscany, Italy), and application of detrended correspondence analysis (DCA) to the mollusc sub‐data set, we offer a refined picture of stratigraphical variations in faunal content from a paralic depositional setting, and reconstruct the palaeoenvironmental gradients that account for such variations. Despite distinct ecological behaviours, and taphonomic and sedimentological constraints, a strong ecological control on meio‐ and macrofaunal biofacies and taxa turnover is documented across the study succession. Amongst all possible mechanisms that may play a role in ‘shaping’ fossil distribution, the ecological signal driven by salinity represents the most prominent factor controlling the composition of fossil associations in the cored succession. Molluscs can even provide outstanding quantitative estimates of palaeosalinity along the sampled core. When plotted stratigraphically, the three fossil sub‐data sets show consistent patterns of vertical evolution that enable prompt identification of the key surfaces for sequence stratigraphical interpretation in otherwise lithologically indistinguishable deposits. The concomitant maximum richness of species with strong marine affinity, paralleled by the highest DCA salinity estimates, allows recognition of the maximum flooding zone, dated to ～7.7 cal. ka BP, within a homogeneous succession of outer lagoon clays. These clays are sandwiched between early transgressive, swamp to inner lagoon deposits and overlying prograding coastal?alluvial plain facies.     

'Sediment'–cement relationships in a Pleistocene speleothem from Italy: a possible analogue for 'replacement' cements and Archaeolithoporella in ancient reefs

Ancient carbonate buildups may contain extraordinarily large amounts of early diagenetic precipitates. In some, host rock lamination may be traced into inclusion bands within the 'cement' crystals, suggesting that the crystals are replacive. By analogy with a Pleistocene speleothem from the Sorrento Peninsula, however, these relationships can be explained differently. In the speleothem, large, repeatedly split and dendritic calcite crystals occur within a laminated carbonate. Lamination consists of sub-mm alternations of micrite and microspar. Micritic laminae pass laterally into inclusion-rich growth bands in the dendritic calcite crystals, and have replaced an aragonitic cement, whereas the microspar laminae were primary calcite cements. Three types of inclusion-rich bands occur in the dendrite crystals: (1) with aragonite relicts, (2) 'ribbon calcite' and (3) with oriented micropores. When aragonite precipitated, the calcite dendrite branches were unable to keep growing as single crystals and split into crystallites (separated by micropores, some forming ribbon calcite), whereas during episodes of calcite lamina precipitation, the larger crystals were regenerated by crystallite coalescence. Calcite crystals are primary: they did not replace a micritic precursor. By analogy with the Italian speleothem, some ancient reefal sparry carbonates may not be replacements of earlier laminated sediments, but may have grown concurrently with them. It is also probable that some ancient laminated sediments were instead sea-floor precipitates, and that stromatolites containing cross-cutting crystal fabrics, and the alternating micrite-microspar laminae typical of Archaeolithoporella , could be largely abiotic crystal growths.     

Ground deformation of the southern sector of the Aeolian islands volcanic arc from geodetic data

The deformation pattern and the dynamics of the southern sector of the Aeolian archipelago are investigated. A study on the ground deformation, measured over the last 20 years in the trilateration geodetic network between the islands of Vulcano and Lipari, has been conducted. Analysis of the relative displacements and the uniform strain tensor parameters, as well as the comparison between areal dilatation and the vertical variations deduced by precise levelling, allow distinguishing different phases associated both with the regional dynamics and the local volcanic context of the area. These phases, however, appear to be closely interrelated. The analysis of the deformation pattern allows to constrain the predominance of a roughly E–W trending extension and a N–S contraction at a regional scale. This regime is consistent with right-lateral movements along a NW–SE striking fault system.     

A nonlinear macroelement model for the seismic analysis of masonry buildings

The macroelement technique for modelling the nonlinear response of masonry panels is particularly efficient and suitable for the analysis of the seismic behaviour of complex walls and buildings. The paper presents a macroelement model specifically developed for simulating the cyclic in‐plane response of masonry walls, with possible applications in nonlinear static and dynamic analysis of masonry structures. The model, starting from a previously developed macroelement model, has been refined in the representation of flexural–rocking and shear damage modes, and it is capable of fairly simulating the experimental response of cyclic tests performed on masonry piers. By means of two internal degrees of freedom, the two‐node macroelement permits to represent the coupling of axial and flexural response as well as the interaction of shear and flexural damage. Copyright © 2013 John Wiley & Sons, Ltd.