Coastal sea level variability in the US West Coast Ocean Forecast System (WCOFS)

Sea level variability along the US West Coast is analyzed using multi-year time series records from tide gauges and a high-resolution regional ocean model, the base of the West Coast Ocean Forecast System (WCOFS). One of the metrics utilized is the frequency of occurrences when model prediction is within 0.15 m from the observed sea level, F. A target level of F?=?90% is set by an operational agency. A combination of the tidal sea level from a shallow water inverse model, inverted barometer (IB) term computed using surface air pressure from a mesoscale atmospheric model, and low-pass filtered sea level from WCOFS representing the effect of coastal ocean dynamics (DYN) provides the most straightforward approach to reaching levels F>80%. The IB and DYN components each add between 5 and 15% to F. Given the importance of the DYN term bringing F closer to the operational requirement and its role as an indicator of the coastal ocean processes on scales from days to interannual, additional verification of the WCOFS subtidal sea level is provided in terms of the model-data correlation, standard deviation of the band-pass filtered (2–60 days) time series, the annual cycle amplitude, and alongshore sea level coherence in the range of 5–120-day periods. Model-data correlation in sea level increases from south to north along the US coast. The rms amplitude of model sea level variability in the 2–60-day band and its annual amplitude are weaker than observed north of 42 N, in the Pacific Northwest (PNW) coast region. The alongshore coherence amplitude and phase patterns are similar in the model and observations. Availability of the multi-year model solution allows computation and analysis of spatial maps of the coherence amplitude. For a reference location in the Southern California Bight, relatively short-period sea level motions (near 10 days) are incoherent with those north of the Santa Barbara Channel (in part, due to coastal trapped wave scattering and/or dissipation). At a range of periods around 60 days, the coastal sea level in Southern California is coherent with the sea surface height (SSH) variability over the shelf break in Oregon, Washington, and British Columbia, more than with the coastal SSH at the same latitudes.     

The Derivation and Validation of TBM Disc Cutter Wear Prediction Model

The problem of disc cutter wear is inevitable when shield or TBM excavating hard rock for a long distance, thus, the study of disc cutter wear model has an important project value on predicting its service life and replacement opportunity. It is put forward by analyzing disc cutter wear mechanism that the main wear form is abrasive wear, which is based on plastic removal mechanism. Then, disc cutter wear rate and linear wear rate prediction models are obtained by approximate calculation and mathematical deduction, which are based on Rabinowicz equation and CSM model. At last, the two models are verified through field test data from three projects, and the results show that the prediction model can accurately reflect the real wear situation of disc cutter.     

The Proterozoic,albitite-hosted,Valhalla uranium deposit,Queensland, Australia: a description of the alteration assemblage associated with uranium mineralisation in diamond drill hole V39

The Valhalla uranium deposit, located 40 km north of Mount Isa, Queensland, Australia, is an albitite-hosted, Mesoproterozoic U deposit similar to albitite-hosted uranium deposits in the Ukraine, Sweden, Brazil and Guyana. Uranium mineralisation is hosted by a thick package of interbedded fine-grained sandstones, arkoses and gritty siltstones that are bound by metabasalts belonging to the ca. 1,780 Ma Eastern Creek Volcanics in the Western Succession of the Mount Isa basin. Alteration associated with U mineralisation can be divided into an early, main and late stage. The early stage is dominated by laminated and intensely altered rock comprising albite, reibeckite, calcite, (titano)magnetite ± brannerite. The main stage of mineralisation is dominated by brecciated and intensely altered rocks that comprise laminated and intensely altered rock cemented by brannerite, apatite, (uranoan)-zircon, uraninite, anatase, albite, reibeckite, calcite and hematite. The late stage of mineralisation comprises uraninite, red hematite, dolomite, calcite, chlorite, quartz and Pb-, Fe-, Cu-sulfides. Brannerite has U–Pb and Pb–Pb ages that indicate formation between 1,555 and 1,510 Ma, with significant Pb loss evident at ca. 1,200 Ma, coincident with the assemblage of Rodinia. The oldest ages of the brannerite overlap with ⁴⁰Ar/³⁹Ar ages of 1,533 ± 9 Ma and 1,551 ± 7 Ma from early and main-stage reibeckite and are interpreted to represent the timing of formation of the deposit. These ages coincide with the timing of peak metamorphism in the Mount Isa area during the Isan Orogeny. Lithogeochemical assessment of whole rock data that includes mineralised and unmineralised samples from the greater Mount Isa district reveals that mineralisation involved the removal of K, Ba and Si and the addition of Na, Ca, U, V, Zr, P, Sr, F and Y. U/Th ratios indicate that the ore-forming fluid was oxidised, whereas the crystal chemistry of apatite and reibeckite within the ore zone suggests that F⁻ and were important ore-transporting complexes. δ¹⁸O values of co-existing calcite and reibeckite indicate that mineralisation occurred between 340 and 380°C and involved a fluid having δ¹⁸O_fluid values between 6.5 and 8.6‰. Reibeckite δD values reveal that the ore fluid had a δD_fluid value between −98 and −54‰. The mineral assemblages associated with early and main stages of alteration, plus δ¹⁸O_fluid and δD_fluid values, and timing of the U mineralisation are all very similar to those associated with Na–Ca alteration in the Eastern Succession of the Mount Isa basin, where a magmatic fluid is favoured for this style of alteration. However, isotopic data from Valhalla is also consistent with that from the nearby Mount Isa Cu deposit where a basinal brine is proposed for the transport of metals to the deposit. Based on the evidence to hand, the source fluids could have been derived from either or both the metasediments that underlie the Eastern Creek Volcanics or magmatism that is manifest in the Mount Isa area as small pegmatite dykes that intruded during the Isan Orogeny.     

Bristen granite: a highly differentiated,fluorite-bearing A-type granite from the Aar massif,Central Alps,Switzerland

Bristen granite is a body of fine-grained leucogranite occurring in the Gotthard rail base tunnel in the Central Alps. During construction of the tunnel, Bristen granite (Brgr) has been drilled along a 600 m long section. The aplite-granite belongs to the suite of Variscan granitoid intrusions of the Aar massif and contains a variety of accessory minerals typical of highly differentiated granites. Rock forming fluorite, partly enriched in yttrium (Y) and rare earth elements (REE), is intergrown with the late Y- and REE-bearing carbonate mineral synchysite. The granite contains a variety of Ti- and Y-REE-niobates, thorite, and zircon. Compared with the calc-alkaline central Aar granite (cAgr), Bristen granite is strongly depleted in Ti, P, Mg, Sr, and Ba and shows a remarkable enrichment in incompatible elements such as Rb, Th, U, Nb, Y, HREE and F. Bristen granite is the most evolved granitoid rock of the Aar massif. The composition of Brgr is typical of post-collisional reduced (ferroan) A-type granites. The Brgr melt formed in the lower crust and crystallized from a highly differentiated melt at the cotectic point in the quartz-feldspar system close to 100 MPa and 700 °C. The Brgr intruded as a small isolated stock pre-Variscan gneisses with sharply discordant contacts. The primary igneous host of Nb, Ta, Y, U, Th and REE is biotite in addition to minor amounts of allanite, and zircon. The presence of Y-REE-fluorite, synchysite, parisite and Y- and Ti-niobates and other REE-minerals can be related to reaction of igneous biotite and primary fluorite with hydrothermal fluids. The reaction is associated with alpine metamorphism, because Y-bearing fluorite and synchysite have been reported from Alpine fissures. The transformation of primary biotite to chlorite and muscovite released the heavy metal oxides under lower greenschist facies conditions that formed the Alpine diagnostic mineral stilpnomelane at about 300 °C.     

An analysis of climatic and human induced determinants of agricultural land use changes in Shupiyan area of Jammu and Kashmir state,India

The economy of the Jammu and Kashmir state depends mostly on traditional forms of occupation. Unaffected and unaltered by modern day industrial developments and changing times, the indigenous traditional occupations of farming, animal husbandry and horticulture forms the backbone of the state economy. But in the last few decades, Agriculture in the state as well as the study area is receiving a set back and Horticulture is flourishing leaps and bounds. The present study aims to analyze various determinants responsible for this change. Climatic as well as field data was thoroughly analyzed to comprehend the situation. A Mann–Kendall test was done on the climatic data to support the hypotheses. It was observed that initially changing climatic trends proved to be the triggering factor supporting this change, but in due course of time, the determinants took an economic and psychological turn. The perusal of Indian Meteorological Data reveals an increasing trend of annual mean maximum temperature from 16.78 °C in 1985 to 17.58 °C in 1995 and an increase from 5.30 °C to 7.00 °C in the annual mean minimum temperature, and as such acting as a triggering factor for the land use conversion. Further, the mean annual rainfall shows a decrease from 100.75 mm in 1981 to 79.43 mm in 1991. The greater economic returns from horticulture as well as the changing behavioral patterns of people over the time further cemented its growth. The farmers have since persisted with the horticulture activity as it has proven to be an economically a much better lucrative enterprise.     

Electrical and electromagnetic surveys to locate possible causes of water seepage to ground surface at a quarry open pit near Helwan city,Egypt

Water seepage to ground surface at a limestone quarry located at Wadi Garawy about 20 km south-east of Helwan city in Egypt posed a real threat to the mining activity at the quarry. The quarry area is known to be very dry for decades and away from water utilities and infrastructures that may cause water leaks to the quarry. Geophysical investigation including 1D Vertical Electrical Sounding (VES), 2D Electrical Resistivity Tomography (ERT) and 1D Transient Electromagnetic (TEM) surveys were conducted to characterize the rock sequence and locate what could be a possible source of water seepage to the quarry. The resistivity profiles generated from the VES and TEM surveys mapped the rock units in the area down to depths exceeded 100 m. The ERT profiles acquired from the quarrying zone close to the water seepage spot have imaged the top of groundwater level at few meters below the ground surface at the quarry open pit. The spot of groundwater seepage seemed to occur at an area of limestone dissolution that were filled by finer sediments. The finer sediments acted as a hydrological conduit that allowed an upward seepage of groundwater to ground surface under the capillary action effect.     

Uncertainty as the overlap of alternate conditional distributions

An important task in modern geostatistics is the assessment and quantification of resource and reserve uncertainty. This uncertainty is valuable support information for many management decisions. Uncertainty at specific locations and uncertainty in the global resource is of interest. There are many different methods to build models of uncertainty, including Kriging, Cokriging, and Inverse Distance. Each method leads to different results. A method is proposed to combine local uncertainties predicted by different models to obtain a combined measure of uncertainty that combines good features of each alternative. The new estimator is the overlap of alternate conditional distributions.     

Temporal and Spatial Dynamics of Diel-Cycling Hypoxia in Estuarine Tributaries

The distribution and intensity of hypoxia (low dissolved oxygen) in estuaries is increasing worldwide due to cultural eutrophication. This study quantifies the strength of associations between the duration of diel-cycling severe hypoxia (≤2 mg O₂ l⁻¹) in bottom water (∼15 cm above bottom) of a shallow (<2 m) coastal lagoon estuary (Delaware, USA) and abiotic environmental variables (water temperature, insolation, tide, streamflow, and wind) and predicts the duration of severe hypoxia given different combinations of these variables. The intensity and spatial extent and dynamics of diel-cycling severe hypoxia events were defined. Vertical variability in dissolved oxygen (DO) concentration during the daytime was also determined. During the summers of 2001–2005, bottom DO data were collected for periods of weeks to months at multiple sites using automated sondes. Multiple linear regression (MLR) and regression tree analysis (RTA) were used to determine the relative importance of the environmental variables in predicting the number of hours of severe hypoxia per day. Key findings of the study were that severe hypoxia events of minutes to hours in duration occurred frequently in all four tributaries sampled, primarily between 0200 and 1000 hours. Severe hypoxia duration and diel-cycling amplitudes of DO concentration increased in the up-tributary direction. Hierarchically, the duration of severe hypoxia was influenced mostly by the mean daily water temperature, then by preceding days’ total insolation, percentage of morning hours (02:00 to 10:00 a.m.) ebb tide, and daily streamflow. Collectively, the variables examined by the MLR and the RTA approaches accounted for 62% and 65% of the variability in the duration of severe hypoxia, respectively. RTA demonstrated that daily mean water temperature above 26.3°C and previous day’s total insolation below 13.6 kW m⁻² were associated with the longest lasting severe hypoxic events (9.56 h). The environmental variables and combinations of conditions that modulate or augment diel-cycling hypoxia presented in this paper enhance understanding of this widespread and growing phenomenon and provide additional insight regarding the extent to which it can impact food webs in very shallow estuarine waters that often serve as nursery habitat.     

Relation between temperature changes of the mid-upper troposphere over Eurasian mid-high latitudes and solar irradiance in the twentieth century

The δ¹⁸O data obtained from an 18.7 m ice core drilled in Chongce Ice Cap at an elevation of 6,530 m a.s.l. in the West Kunlun Mountains on the northern Tibetan Plateau show a strong correlation with the summer temperature of the middle to upper troposphere over the mid-high latitudes of Eurasia. Based on this, the δ¹⁸O record can be used as a proxy of the June–September mean temperature of the mid-upper troposphere (MUT) from 1903 to 1992. The time span of the ice core record is much longer than the meteorological data available only after 1948. Using the empirical mode decomposition method (EMD), the δ¹⁸O record is decomposed into various frequency components and compared with the solar irradiance variations of the same period. The results show that (1) The June–September mean temperature of the MUT over Eurasian mid-high latitudes is completely decomposed into four IMF (intrinsic mode function) components and an increasing trend. (2) Solar irradiance is decomposed into the Schwabe cycle, the Hale cycle, the Gleissberg cycle, and an increasing trend. (3) The correlation coefficients between the June and September mean temperatures of the MUT over Eurasian mid-high latitudes and solar irradiance on the longer timescales (at least more than 11-year) show the significant correlations; their phase changes are basically identical in general, and (4) the 11-year Schwabe cycle exists in the June–September mean temperature of the MUT over Eurasian mid-high latitudes during most of the time from 1903 to 1992, and only in the two high-temperature phases (1929–1944 and from 1975 to the present) may global warming disturb this relation. A full understanding of this phenomenon would shed insight into the potential consequence of global warming on the MUT.     

PLL Tracking Performance in the Presence of Oscillator Phase Noise

The tracking performance of a Phase Lock Loop (PLL) is affected by the influence of several error sources. In addition to thermal noise and dynamic stress error, oscillator phase noise can cause significant phase jitter which degrades the tracking performance. Oscillator phase noise is usually caused by two different effects: Allan deviation phase noise is caused by frequency instabilities of the receiver's reference oscillator and the satellite's frequency standard. It can be termed as system-inherent phase noise and is relevant for both static and dynamic applications. “External” phase noise, however, is caused by vibration and is a major problem for dynamic applications. In the context of this paper, both types of phase noise will be modeled and the resulting integrals will be evaluated for PLLs up to the third order. Besides, phase jitter induced by thermal noise and signal dynamics will also be discussed, thus providing all necessary formulas for analyzing the performance of a phase lock loop in case of different forms of stress. Since the main focus is centered on the effects of oscillator phase noise, the overall PLL performance is graphically illustrated with and without consideration of oscillator phase noise. © 2002 Wiley Periodicals, Inc.