Electrical Resistivity Characterization of Anisotropy in the Biscayne Aquifer

Electrical anisotropy occurs when electric current flow varies with azimuth. In porous media, this may correspond to anisotropy in the hydraulic conductivity resulting from sedimentary fabric, fractures, or dissolution. In this study, a 28‐electrode resistivity imaging system was used to investigate electrical anisotropy at 13 sites in the Biscayne Aquifer of SE Florida using the rotated square array method. The measured coefficient of electrical anisotropy generally ranged from 1.01 to 1.12 with values as high as 1.36 found at one site. The observed electrical anisotropy was used to estimate hydraulic anisotropy (ratio of maximum to minimum hydraulic conductivity) which ranged from 1.18 to 2.83. The largest values generally were located on the Atlantic Coastal Ridge while the lowest values were in low elevation areas on the margin of the Everglades to the west. The higher values of anisotropy found on the ridge may be due to increased dissolution rates of the oolitic facies of the Miami formation limestone compared with the bryozoan facies to the west. The predominate trend of minimum resistivity and maximum hydraulic conductivity was E‐W/SE‐NW beneath the ridge and E‐W/SW‐NE farther west. The anisotropy directions are similar to the predevelopment groundwater flow direction as indicated in published studies. This suggests that the observed anisotropy is related to the paleo‐groundwater flow in the Biscayne Aquifer.     

Use of Groundwater Levels with the PULSE Analytical Model

The PULSE analytical model, which calculates daily groundwater discharge on the basis of user‐specified recharge, was originally developed for calibration using streamflow data. This article describes a model application in which groundwater level data constitute the primary control on model input. As a test case, data were analyzed from a small basin in central Pennsylvania in which extensive groundwater level data are available. The timing and intensity of daily water‐level rises are used to ascertain temporal distribution of recharge, and the simulated groundwater discharge hydrograph has shape features that are similar to the streamflow hydrograph. This article does not include details about calibration, but some steps are illustrated and general procedures are described for calibration in specific hydrologic studies. The PULSE model can be used to assess results of fully automated base flow methods and can be used to define groundwater recharge and discharge at a relatively small time scale.     

Parameter Estimation for Groundwater Models under Uncertain Irrigation Data

The success of modeling groundwater is strongly influenced by the accuracy of the model parameters that are used to characterize the subsurface system. However, the presence of uncertainty and possibly bias in groundwater model source/sink terms may lead to biased estimates of model parameters and model predictions when the standard regression‐based inverse modeling techniques are used. This study first quantifies the levels of bias in groundwater model parameters and predictions due to the presence of errors in irrigation data. Then, a new inverse modeling technique called input uncertainty weighted least‐squares (IUWLS) is presented for unbiased estimation of the parameters when pumping and other source/sink data are uncertain. The approach uses the concept of generalized least‐squares method with the weight of the objective function depending on the level of pumping uncertainty and iteratively adjusted during the parameter optimization process. We have conducted both analytical and numerical experiments, using irrigation pumping data from the Republican River Basin in Nebraska, to evaluate the performance of ordinary least‐squares (OLS) and IUWLS calibration methods under different levels of uncertainty of irrigation data and calibration conditions. The result from the OLS method shows the presence of statistically significant (p < 0.05) bias in estimated parameters and model predictions that persist despite calibrating the models to different calibration data and sample sizes. However, by directly accounting for the irrigation pumping uncertainties during the calibration procedures, the proposed IUWLS is able to minimize the bias effectively without adding significant computational burden to the calibration processes.     

On the material dependence of experimental shear fracture orientation

It is not uncommon to observe shear fractures in ductile rocks oriented at more than 45° with respect to the maximum compression direction. Since these orientations cannot be explained with the classic Mohr-Coulumb or Tresca yield criteria, Zheng et al.(Journal of Structural Geology, 35: 1394–1405, 2011) proposed the maximum effective moment(MEM) failure criterion. This rule suggests that shear fractures in ductile rocks form at ?55° with the maximum compression axis and that this orientation is material-independent and, therefore, universal. Zheng et al.(Science China: Earth Sciences, 57(11): 2819–2824, 2014) used data from our own experiments as supporting evidence of their failure criterion. In this contribution we discuss why shear fracture formation in ductile rocks indeed strongly depends on the mechanical properties of the deforming medium, and why experimental data should not be taken to prove the validity of the MEM criterion. The formation mechanisms and orientations of shear fractures in our experiments significantly vary depending on the material strength and degree and type of anisotropy(composite and intrinsic). We therefore demonstrate using experimental data that a universal failure angle in ductile and anisotropic rocks does not apply. Additionally, we highlight some inconsistencies of the MEM criterion.     

Seasonal and event-controlled export of organic matter from the shelf towards the Gulf of Lions continental slope

To investigate the role of coastal canyons in the transfer of organic matter from the shelf to the slope and basin, we deployed sediment trap/current meter pairs at the head of five canyons in the Gulf of Lions (GoL) between November 2003 and May 2004. Analysis of organic carbon, biogenic silica, Corg isotopic composition, Corg/total nitrogen, chloropigments, and amino acids clearly shows the seasonal influence and effect of extreme meteorological events on the composition of collected particles. The sampling period was divided into three “scenarios”. The first corresponded to a large easterly storm and flood of the Rhone river during stratified water column conditions; the composition of material collected during this event was influenced by increased transfer of riverine and coastal particulate matter, with a lower Corg content. During the second “fall-winter” scenario, northern and northwestern winds blowing over the shelf caused cooling and homogenization of the shelf water column; particles collected at this time reflected the homogeneous source of particulate matter transported through canyons; particles sitting in the vicinity of canyon heads are most likely swept downslope by the general south-westward circulation. Organic tracers indicate a degraded origin for organic matter transported during this period. A third “spring” scenario corresponded to northern winds alternating with eastward windstorms that triggered and/or enhanced the cascading of dense waters accumulated on the bottom of the shelf due to previous cooling. These conditions occurred in conjunction with increased phytoplankton productivity in shelf surface waters. Organic matter advected mainly by dense shelf water cascading was fresher due to the transport of newly produced particles and a variable terrestrial fraction; this fraction depended on the proportion of resuspended material accumulated during previous high discharge periods that was involved in each transport pulse. The tight link shown between meteorological conditions and organic matter transport is important for continental margin geochemical studies as future changes in climatic conditions may lead to dramatic changes in carbon sequestration capability and in the ecosystems of deep margin environments.     

East Asian monsoon intensification promoted weathering of the magnesium-rich southern China upper crust and its global significance

The Oligocene-Miocene boundary Asian climatic reorganization linked to the northward migration of the East Asian monsoon into subtropical China is a potentially important but poorly constrained atmospheric CO_2 consumption process.Here,we performed a first-order estimate of the CO_2 consumption induced by silicate chemical weathering and organic carbon burial in subtropical China related to this climatic reorganization.Our results show that an increase in long-term CO_2 consumption by silicate weathering varies from 0.06×10~(12)to 0.87×10~(12)mol yr~(-1)depending on erosion flux reconstructions,with an~50%contribution of Mg-silicate weathering since the late Oligocene.The organic carbon burial flux is approximately 25% of the contemporary CO_2 consumption by silicate weathering.The results highlight the significant role of weathering of the Mg-rich upper continental crust in East China,which would contribute to the rapid decline in atmospheric CO_2 during the late Oligocene and the Neogene rise in the seawater Mg content.If this climatic reorganization was mainly induced by the Tibetan Plateau uplift,our study suggests that the growth of the Himalayan-Tibetan Plateau can lead to indirect modification of the global carbon and magnesium cycles by changing the regional hydrological cycle in areas of East Asia that are tectonically less active.     

Scaling Variances of Scalars in a Convective Boundary Layer Under Different Entrainment Regimes

For the presentation and analysis of atmospheric boundary-layer (ABL) data, scales are used to non-dimensionalise the observed quantities and independent variables. Usually, the ABL height, surface sensible heat flux and surface scalar flux are used. This works well, so long as the absolute values of the entrainment ratio for both the scalar and temperature are similar. The entrainment ratio for temperature naturally ranges from −0.4 to −0.1. However, the entrainment ratio for passive scalars can vary widely in magnitude and sign. Then the entrainment flux becomes relevant as well. The only customary scalar scale that takes into account both the surface flux and the entrainment flux is the bulk scalar scale, but this scale is not well-behaved for large negative entrainment ratios and for an entrainment ratio equal to −1. We derive a new scalar scale, using previously published large-eddy simulation results for the convective ABL. The scale is derived under the constraint that scaled scalar variance profiles are similar at those heights where the variance producing mechanisms are identical (i.e., either near the entrainment layer or near the surface). The new scale takes into account that scalar variance in the ABL is not only related to the surface flux of that scalar, but to the scalar entrainment flux as well. Furthermore, it takes into account that the production of variance by the entrainment flux is an order of magnitude larger than the production of variance by the surface flux (per unit flux). Other desirable features of the new scale are that it is always positive (which is relevant when scaling standard deviations) and that the scaled variances are always of order 1–10.     

Tectonic controls on carbonate sequence formation in an active strike–slip setting: Serranilla Basin, Northern Nicaragua Rise, Western Caribbean Sea

The Serranilla Basin is a flat-floored, semi-circular bathymetric depression (100×100 km; 1100–1200 m deep) at the western end of the northern Nicaragua Rise (NNR) in the Caribbean Sea. It is bound to the north by the Cayman Trough, an area of active sea floor spreading, and is part of the Northern Caribbean Plate Boundary Zone (NCPBZ). Single-channel, high-resolution seismic data were calibrated to rock dredges and ODP Site 1000 to define the geologic evolution and attempt to tie sequence formation within the basin to tectonic developments in this part of the Caribbean. Five seismic sequences were identified within the basin. The two lower sequences (A and B) are interpreted as neritic and shallow periplatform deposits which infill three distinct basins that make up the early to late Miocene Serranilla Basin. The three upper sequences (C through E) are interpreted as periplatform and pelagic deposits interspersed with turbidites, and in some areas, megabreccias. Faulting is prevalent in sequences A through C in the central basin, and becomes progressively younger toward the south, disrupting the seafloor in places and perhaps indicating renewed activity along the Pedro Fracture Zone. The timing of sequence boundary formation has been correlated to tectonic activity along the NCPBZ and closure of the Central American Seaway. Possible mechanisms of sequence boundary formation include tectonic tilting within the basin in conjunction with increased turbidite deposition, carbonate platform drowning and subsequent back-stepping associated with circulation changes resulting from tectonic ‘gateway' closure, and megabreccia deposition associated with bank demise. Although a direct genetic relationship is not proven, regional tectonic changes are considered more important than eustatic sea-level changes in controlling depositional sequence formation in the Serranilla Basin.