Reconstruction of Horizontal Plasma Motions at the Photosphere from Intensitygrams: A Comparison Between DeepVel,LCT, FLCT,and CST

Direct measurements of plasma motions in the photosphere are limited to the line-of-sight component of the velocity. Several algorithms have therefore been developed to reconstruct the transverse components from observed continuum images or magnetograms. We compare the space and time averages of horizontal velocity fields in the photosphere inferred from pairs of consecutive intensitygrams by the LCT, FLCT, and CST methods and the DeepVel neural network in order to identify the method that is best suited for generating synthetic observations to be used for data assimilation. The Stein and Nordlund (Astrophys. J. Lett.753, L13, 2012) magnetoconvection simulation is used to generate synthetic SDO/HMI intensitygrams and reference flows to train DeepVel. Inferred velocity fields show that DeepVel performs best at subgranular and granular scales and is second only to FLCT at mesogranular and supergranular scales.     

Physical partitioning of mercury in till: an example from central British Columbia, Canada

The physical partitioning of Hg into different grain size fractions of till is predominantly controlled by the primary bedrock mineralogy, the distance of glacial transport, and the relative stability of cinnabar (HgS) in the soil weathering environment. At sites located short distances down-ice from bedrock cinnabar mineralization, the highest Hg concentrations in unoxidized till were measured in the sand- and granule-sized fractions reflecting the abundance of cinnabar in those size ranges. Similar partitioning was measured in oxidized till as cinnabar was found to be relatively resistant to postglacial weathering. Discrete clay-sized cinnabar grains obtained from the unoxidized till were viewed under the scanning electron microscope and suggest that the terminal grade of cinnabar is in the clay-sized range. In till collected from areas barren of cinnabar mineralization, the highest Hg levels were found in the clay-sized fraction which is attributed to the high adsorption of Hg by clay minerals.     

Limit analysis for saturated porous media without fluid flow calculation

Application of yield design to porous media usually requires a preliminary calculation of the fluid flow net. The stability analysis is then carried out with seepage forces associated with the flow. We assume here that the flow is steady and that the yield criterion is defined by a function of the effective stress tensor. The formulation that we propose here allows taking into account seepage force in the expression of the kinematic stability conditions by means of hydraulic boundary conditions without calculation of the fluid flow. One obtains a formulation of the kinematic condition similar to the case of classic, non-porous media. The method is illustrated by two examples: a cylinder subjected to fluid flow and a vertical cut. It can be adapted to various boundary conditions and to the case of a criterion defined by a function of a generalized effective stress tensor. We also give a method to derive rigorous lower bounds using approximate fluid pressure field. Copyright © 2004 John Wiley & Sons, Ltd.     

The concept of travelling bedload and its consequences for bedload computation in mountain streams

In bedload transport modelling, it is usually presumed that transported material is fed by the bed itself. This may not be true in some mountain streams where the bed can be very coarse and immobile for the majority of common floods, whereas a finer material, supplied by bed‐external sources, is efficiently transported during floods, with marginal morphological activities. This transport mode was introduced in an earlier paper as ‘travelling bedload’. It could be considered an extension of the washload concept of suspension, applied to bedload transport in high‐energy, heavily armoured streams. Since this fine material is poorly represented in the bed surface, standard surface‐based approaches are likely to strongly underestimate the true transport in such streams. This paper proposes a simple method to account for travelling bedload in bedload transport estimations. The method is tested on published datasets and on a typical Alpine stream, the Roize (Voreppe, France). The results, particularly on active streams that experience greater transport than expected from the grain sizes of their bed material, reinforce the necessity of accounting for the ‘travelling bedload concept’ in bedload computation. The method relevance is discussed regarding varying flood magnitudes, geomorphic responses and eventual anthropic origin of the ‘travelling bedload’ phenomena. To conclude, this paper considers how to compute bedload transport for a wide range of situations, ranging from sediment‐starved cases to the general mobile bed alluvial case, including the intermediate situation of external source supply on armoured bed. Copyright © 2017 John Wiley & Sons, Ltd.     

A new building energy model coupled with an urban canopy parameterization for urban climate simulations—part I. formulation, verification, and sensitivity analysis of the model

The generation of heat in buildings, and the way this heat is exchanged with the exterior, plays an important role in urban climate. To analyze the impact on urban climate of a change in the urban structure, it is necessary to build and use a model capable of accounting for all the urban heat fluxes. In this contribution, a new building energy model (BEM) is developed and implemented in an urban canopy parameterization (UCP) for mesoscale models. The new model accounts for: the diffusion of heat through walls, roofs, and floors; natural ventilation; the radiation exchanged between indoor surfaces; the generation of heat due to occupants and equipments; and the consumption of energy due to air conditioning systems. The behavior of BEM is compared to other models used in the thermal analysis of buildings (CBS-MASS, BLAST, and TARP) and with another box-building model. Eventually, a sensitivity analysis of different parameters, as well as a study of the impact of BEM on the UCP is carried out. The validations indicate that BEM provides good estimates of the physical behavior of buildings and it is a step towards a modeling tool that can be an important support to urban planners.     

Datation UPb : âge de mise en place du magmatisme bimodal des Jebilet centrales (chaı̂ne Varisque,Maroc). Implications géodynamiques

The bimodal magmatism of central Jebilet is dated to 330.5^+0.68_?0.83 Ma by UPb dating on zircons. This age, similar to that of the syntectonic Jebilet cordierite-bearing granitoids, corresponds to the age of the local major tectonometamorphic event. The syntectonic plutonism of the Jebilet massif, composed of tholeiitic, alkaline, and peraluminous calc-alkaline series, is variegated. Magmas emplacement was favoured by the local extension induced by the motion along the western boundary of the Carboniferous basins of the Moroccan Meseta. The Jebilet massif exemplifies the activation of various magmas sources during an episode of continental convergence and crustal wrenching.     

Preliminary data on chemical changes in the Aral Sea during low-level periods from the last 9000 years

The withdrawal of the Aral Sea tributaries (Amu and Syr Daria) for cultures has led to significant falls of its level and an important increase in its salinity. During the Holocene, a succession of low and high water inputs occurred. Silty deposits correspond to the high levels and carbonates to the low levels. This study makes a distinction between the Syr Daria and the Amu Daria water inputs during low-level periods by using mineralogical and chemical compositions of the carbonates deposits. Waters from the Syr Daria are more sulphatic and have a low iron content in comparison with that of the Amu Daria. The Syr Daria was the major tributary around 7500, 4956 and 970 yr?BP, whereas around 6200 and 3610 yr?BP, inflow also from the Amu Daria is observed. To cite this article: L. Le Callonnec et al., C. R. Geoscience 337 (2005).     

Measuring and interpreting heat fluxes from shallow volcanic bodies using vertical temperature profiles: a preliminary test

 To test the potential of heat flux prospecting in active volcanic areas using shallow temperature data taken along vertical profiles, we carried out two thermal profile surveys, one not far from Yasur cone on Tanna Island, and another inside the caldera of Ambrym (New Hebrides arc, southwestern Pacific). The basic steady heat flux of internal volcanic origin was determined, taking into account both conductive and convective heat transfers. At both locations there exists, over small distances, significant differences in the heat flux. These differences correspond to shallow sources of heat. The use of a network of vertical profiles allowed: (a) heat flux mapping; (b) location of shallow volcanic heat sources; and (c) observation of the detailed structure of the heat release at quiescent but active volcanoes. Received: 18 July 1997 / Accepted: 13 May 1998     

Variscan to eo-Alpine events recorded in European lower-crust zircons sampled from the French Massif Central and Corsica, France

Ion-microprobe U–Pb zircon dating of lower-crust metasedimentary granulite are reported on samples from two localities in Europe in order to determine (a) how this environment recorded the Variscan and eo-Alpine events, and (b) whether the transition between the two orogenic cycles was continuous or separated by a gap. The samples come from enclaves hosted by Miocene volcanoes at Bournac in the French Massif Central, and from the granulitic metasedimentary basement of the Alpine Santa Lucia nappe in Corsica, on the South European paleomargin of the Ligurian branch of the Tethys Sea. The zircon ages from Bournac range between 630 and 430 Ma and between 380 and 150 Ma with a major frequency peak at 285 Ma; the zircons older than 430 Ma are interpreted as detrital, whereas those younger than 380 Ma are considered to have formed by metamorphic processes after burial in the lower crust. Zircon ages from Santa Lucia range from to 356 to 157 Ma, with exception of one inherited Archean grain, and are interpreted like the younger Bournac zircons as having been formed by metamorphic processes.

In a granulite metamorphic environment, as opposed to an anatectic environment, new zircon growth can occur in the solid state. Once Zr has been incorporated into zircon, however, it is difficult to remobilize without dissolution; thus Zr available for new zircon growth must result from the breakdown of Zr-bearing minerals during prograde and/or retrograde events. In this light, the U–Pb zircon-age probability curves are interpreted as markers for major tectonometamorphic events, as suggested by the close correspondence between peaks in the curve and geological events recorded in the upper-crust, such as magma emplacement and basin subsidence.

Evidence of a tectonometamorphic gap between the Variscan and Alpine orogeneses is provided by the Santa Lucia zircon-age probability curve, which reveals a probable interlude during the Variscan–Alpine transition between 240 and 210 Ma. Here, the peak at 240 Ma is interpreted as the very beginning of crustal extension and the low at 210 Ma as a period of quiescence prior to the formation of an active margin and oceanization.     

Wave groupiness and spectral bandwidth as relevant parameters for the performance assessment of wave energy converters

To date the estimation of long-term wave energy production at a given deployment site has commonly been limited to a consideration of the significant wave height H_s and mean energy period T_e. This paper addresses the sensitivity of power production from wave energy converters to the wave groupiness and spectral bandwidth of sea states. Linear and non-linear systems are implemented to simulate the response of converters equipped with realistic power take-off devices in real sea states. It is shown in particular that, when the converters are not much sensitive to wave directionality, the bandwidth characteristic is appropriate to complete the set of overall wave parameters describing the sea state for the purpose of estimating wave energy production.