Effects of water and fines contents on the resilient modulus of the interlayer soil of railway substructure

This paper deals with the resilient behavior of the interlayer soil which is created mainly by the interpenetration of ballast and subgrade soils. The interlayer soil studied was taken from a site in the southeast of France. Large-scale cyclic triaxial tests were carried out at three water contents (w = 4, 6 and 12 %) and three fines contents corresponding to 5, 10 % subgrade added to the natural interlayer soil and 10 % fine particles (<80 μm) removed from the natural interlayer soil. Soil specimens underwent various deviator stresses, and for each deviator stress, a large number of cycles was applied. The effects of deviator stress, number of cycles, water content and fines content on the resilient modulus (M _r) were analyzed. It appears that the effects of water content and fines content must be analyzed together because the two effects are closely linked. Under unsaturated conditions, the soil containing high fines content has higher resilient modulus due to the contribution of suction. When the soil approaches the saturated state, it loses its mechanical enhancement with a sharp decrease in resilient modulus.     

Application of a novel cascade-routing and reinfiltration concept with a Voronoi unstructured grid in MODFLOW 6, for an assessment of surface-water/groundwater interactions in a hard-rock catchment (Sardon,Spain)

Hydrogeology Journal - Integrated hydrological modelling (IHM) can reliably characterize surface-water/groundwater interactions in complex hydrological systems such as hard-rock systems (HRS),...     

The usefulness of outcrop analogue air permeameter measurements for analyzing aquifer heterogeneity: quantifying outcrop hydraulic conductivity and its spatial variability

Saturated hydraulic conductivity (K) is one of the most important parameters determining groundwater flow and contaminant transport in both unsaturated and saturated porous media. Although several well‐established laboratory methods exist for determining K, in situ measurements of this parameter remain very complex and scale dependent. Often, the limited accessibility of subsurface sediments for sampling means an additional impediment to our ability to quantify subsurface K heterogeneity. One potential solution is the use of outcrops as analogues for subsurface sediments. This paper investigates the use of air permeameter measurements on outcrops of unconsolidated sediments to quantify K and its spatial heterogeneity on a broad range of sediment types. The Neogene aquifer in northern Belgium is used as a case study for this purpose. To characterize the variability in K, 511 small‐scale air permeability measurements were performed on outcrop sediments representative over five of the aquifer's lithostratigraphic units. From these measurements, outcrop‐scale equivalent K tensors were calculated using numerical upscaling techniques. Validation of the air permeameter‐based K values by comparison with laboratory constant head K measurements reveals a correlation of 0.93. Overall, the results indicate that hand‐held air permeameters are very efficient and accurate tools to characterize saturated K, as well as its small‐scale variability and anisotropy on a broad range of unconsolidated sediments. The studied outcrops further provided a qualitative understanding of aquifer hydrostratigraphy and quantitative estimates about K variability at the centimetre‐scale to metre‐scale. Copyright © 2013 John Wiley & Sons, Ltd.     

Implementation of an automatic calibration procedure for HYDROTEL based on prior OAT sensitivity and complementary identifiability analysis

Efficiency of hydrological models mostly depends on the quality of the calibration performed prior to use. In this paper, an automatic calibration framework for the distributed hydrological model HYDROTEL is proposed. The calibration procedure was performed for three watersheds characterized with different hydroclimatological conditions: the Sassandra located in Ivory Coast, Africa, and the Montmorency and Beaurivage watersheds located in Quebec (Canada). Results of one‐a‐time (OAT) sensitivity analysis showed that the order of the most sensitive parameters differs for each watershed. Thus, the sensitivity depends on the hydroclimatic and physiographic characteristics of the watersheds. Co‐linearity indices showed that all model parameters were identifiable, that is, none of the studied parameters could be explained by a combination of the other parameters. Following these findings, an automatic calibration was run. Results indicated there was good agreement between simulated and measured streamflows at the outlet of each watershed; Nash–Sutcliffe efficiency (NSE) ranging between 0.77 and 0.92 and R² ranging from 0.87 to 0.97. When comparing NSE and R² values obtained using a process‐oriented, multiple‐objective, manual calibration strategy, a slight increase in model efficiency was reached with the automatic calibration procedure (4.15% for NSE and 2.95% for R²) improving predictions of peak flows for the Montmorency and Beaurivage watersheds (temperate climate conditions) and flows beyond the rainfall season in the Sassandra watershed. The proposed automatic calibration procedure introduced in this paper may be applied to other distributed hydrological model. Copyright © 2013 John Wiley & Sons, Ltd.     

The linear steady response of a stratified baroclinic atmosphere to elevated diabatic forcing

Abstract

A parameter study is presented of the linear steady response to an elevated diabatic forcing in a Boussinesq baroclinic atmosphere. The model is two‐dimensional on the vertical plane; the basic wind is perpendicular to this plane with horizontal and vertical shear. The intensity of the circulation is sensitive to the strength of the baroclinic zone only for weak static stability. A scale analysis supports this conclusion: the importance of baroclinic effects depends on the ratio of the aspect ratio of the circulation to the aspect ratio of the baroclinic basic state. Baroclinicity also leads to a tilt of the circulation due to enhanced horizontal temperature advection, and the corresponding vertical flux of horizontal momentum. The magnitude of the latter can be large when the Richardson number approaches its critical value from above, i.e. for slightly symmetrically stable basic flows; this is true even with viscosity. The resonant limit where the Richardson number approaches the critical value for symmetric instability is also examined. For non‐zero dissipation, the critical value is smaller than that of the inviscid limit.     

Intense warm and saline upper ocean inflow in the southern Bay of Biscay in autumn–winter 2006–2007

Unusually warm and saline near-surface inflow was observed in the southern Bay of Biscay (Northeast Atlantic) in autumn–winter 2006–2007. These anomalies were swiftly entrained eastward through the Iberian Poleward Current flowing over the slope and shelf. Here, we present a quasi-synoptic three dimensional view of this event, which started as early as August 2006. In situ hydrological and Lagrangian measurements were used to describe its characteristics. The warm anomaly was surface intensified over the shelf, with surface temperature above 17 °C, a monthly anomaly over 1 °C compared to the 1994–2006 period. The saline anomaly was maximum around 100–200 m deep, over the upper slope, with values above 35.9 psu. Slope and shelf were seen to exhibit a complex structure of eastward (poleward) and westward (equatorward) currents. Maximum currents, observed near surface, over the upper slope in the eastern part of the Bay of Biscay, were determined to exceed 1.3 m s^?1. This current system eventually became unstable, thereby promoting strong exchange of properties between coastal and deep ocean. The event was coincident with abnormal southerly wind conditions west of Iberia in autumn 2006, and with the unusually warm autumn–winter weather over western Europe. A dynamical analysis relying on wind forcing west and north of Iberia is proposed.     

Modelling the influence of environmental factors on the physiological status of the Pacific oyster Crassostrea gigas in an estuarine embayment; The Baie des Veys (France)

It is well known that temporal changes in bivalve body mass are strongly correlated with temporal variations in water temperature and food supply. In order to study the influence of the year-to-year variability of environmental factors on oyster growth, we coupled a biogeochemical sub-model, which simulates trophic resources of oysters (i.e. phytoplankton biomass via chlorophyll a), and an ecophysiological sub-model, which simulates growth and reproduction (i.e. gametogenesis and spawning), using mechanistic bases. The biogeochemical sub-model successfully simulated phytoplankton dynamics using river nutrient inputs and meteorological factors as forcing functions. Adequate simulation of oyster growth dynamics requires a relevant food quantifier compatible with outputs of the biogeochemical sub-model (i.e. chlorophyll a concentration). We decided to use the phytoplankton carbon concentration as quantifier for food, as it is a better estimator of the energy really available to oysters. The transformation of chlorophyll a concentration into carbon concentration using a variable chlorophyll a to carbon ratio enabled us to improve the simulation of oyster growth especially during the starvation period (i.e. autumn and winter). Once validated, the coupled model was a suitable tool to study the influence of the year-to-year variability of phytoplankton dynamics and water temperature on the gonado-somatic growth of the Pacific oyster. Four years with highly contrasted meteorological conditions (river inputs, water temperature and light) 2000, 2001, 2002 and 2003, were simulated. The years were split into two groups, wet years (2000 and 2001) and dry years (2002 and 2003). Significant variability of the response of oysters to environmental conditions was highlighted between the four scenarios. In the wet years, an increase in loadings of river nutrients and suspended particulate matter led to a shift in the initiation and the magnitude of the phytoplanktonic spring bloom, and consequently to a shift in oyster growth patterns. In contrast, in the dry years, an increase in water temperature—especially during summer—resulted in early spawning. Thus, the gonado-somatic growth pattern of oysters was shown to be sensitive to variations in river loadings and water temperature. In this context, the physiological status of oysters is discussed using a relevant indicator of energy needs.     

gvSOS: A New Client for the OGC® Sensor Observation Service Interface Standard

A key problem with sensor networks is achieving interoperability between different networks potentially built using different software and hardware platforms. Services interfaced by the Open Geospatial Consortium (OGC) specifications allow GIS clients to access geospatial data without knowing the details about how these data are gathered or stored. Currently, OGC is working on a set of interoperable interfaces and metadata encodings known as Sensor Web Enablement (SWE) that enables the integration of heterogeneous sensor systems and measurements into geospatial information infrastructures. In this article we present the implementation of gvSOS, a new module for gvSIG to connect to Sensor Observation Services (SOS). The gvSOS client module allows gvSIG users to interact with SOS servers, displaying the information gathered by sensors as a layer composed by features. We present the software engineering development process followed to build the module. For each step of the process we specify the main obstacles found during the development such as restrictions of the gvSIG architecture, inaccuracies in the OGC specifications, and a set of common problems found in current SOS server implementations available on the Internet. For most of the problems found we propose a solution, or at least we present a path that might lead to it.