Links between NAO fluctuations and inter-annual variability of winter-months precipitation in the Seine River watershed (north-western France)

The inter-annual to multi-decadal winter variability (DJFM) of precipitation on the Seine River watershed (France) was analysed using continuous wavelet transform analysis and compared to the winter North Atlantic Oscillation Index (NAOI). Nine weather stations were used over the 1951 to 2004 period and confirmed the homogeneity of inter-annual fluctuations for all stations but one. Wavelet coherence between SLP over the Icelandic and Azores regions and precipitation highlighted coherence for different scales of variability according to the centre of action considered. Segmentation and wavelet analysis and coherence between precipitation and NAOI over a long period of time (1873–2004) showed: i) increasing variability across the last century at most time scales, especially for NAOI; ii) the existence of change points for the mean and variance of both signals; iii) overall discontinuity of the coherence whatever the scale considered, especially between ∼1910 and ∼1955 for inter-decennial to pluri-decennial scales.     

Continuous GPS and broad-scale deformation across the Rhine Graben and the Alps

In order to study the ongoing tectonic deformation in the Rhine Graben area, we reconstruct the local crustal velocity and the strain rate field from GPS array solutions. Following the aim of this work, we compile the velocities of permanent GPS stations belonging to various networks (EUREF, AGNES, REGAL and RGP) in central western Europe. Moreover, the strain rate field is displayed in terms of principal axes and values, while the normal and the shear components of the strain tensor are calculated perpendicular and parallel to the strike of major faults. The results are compared with the fault plane solutions of earthquakes, which have occurred in this area. A broad-scale kinematic deformation model across the Rhine Graben is provided on the basis of tectonics and velocity results of the GPS permanent stations. The area of study is divided into four rigid blocks, between which there might be relative motions. The velocity and the strain rate fields are reconstructed along their borders, by estimating a uniform rotation for each block. The tectonic behaviour is well represented by the four-block model in the Rhine Graben area, while a more detailed model will be needed for a better reconstruction of the strain field in the Alpine region.

Multi-scale aquifer characterization and groundwater flow model parameterization using direct push technologies

Direct push (DP) technologies are typically used for cost-effective geotechnical characterization of unconsolidated soils and sediments. In more recent developments, DP technologies have been used for efficient hydraulic conductivity (K) characterization along vertical profiles with sampling resolutions of up to a few centimetres. Until date, however, only a limited number of studies document high-resolution in situ DP data for three-dimensional conceptual hydrogeological model development and groundwater flow model parameterization. This study demonstrates how DP technologies improve building of a conceptual hydrogeological model. We further evaluate the degree to which the DP-derived hydrogeological parameter K, measured across different spatial scales, improves performance of a regional groundwater flow model. The study area covers an area of ~60 km² with two overlying, mainly unconsolidated sand aquifers separated by a 5–7 m thick highly heterogeneous clay layer (in north-eastern Belgium). The hydrostratigraphy was obtained from an analysis of cored boreholes and about 265 cone penetration tests (CPTs). The hydrogeological parameter K was derived from a combined analysis of core and CPT data and also from hydraulic direct push tests. A total of 50 three-dimensional realizations of K were generated using a non-stationary multivariate geostatistical approach. To preserve the measured K values in the stochastic realizations, the groundwater model K realizations were conditioned on the borehole and direct push data. Optimization was performed to select the best performing model parameterization out of the 50 realizations. This model outperformed a previously developed reference model with homogeneous K fields for all hydrogeological layers. Comparison of particle tracking simulations, based either on the optimal heterogeneous or reference homogeneous groundwater model flow fields, demonstrate the impact DP-derived subsurface heterogeneity in K can have on groundwater flow and solute transport. We demonstrated that DP technologies, especially when calibrated with site-specific data, provide high-resolution 3D subsurface data for building more reliable conceptual models and increasing groundwater flow model performance.     

Development of a rain‐on‐snow detection algorithm using passive microwave radiometry

Currently observed climate warming in the Arctic has numerous consequences. Of particular relevance, the precipitation regime is modified where mixed and liquid precipitation can occur during the winter season leading to rain‐on‐snow (ROS) events. This phenomenon is responsible for ice crust formation, which has a significant impact on ecosystems (such as biological, hydrological, ecological and physical processes). The spatially and temporally sporadic nature of ROS events makes the phenomenon difficult to monitor using meteorological observations. This paper focuses on the detection of ROS events using passive microwave (PMW) data from a modified brightness temperature (T_B) gradient approach at 19 and 37 GHz. The approach presented here was developed empirically for observed ROS events with coincident ground‐based PMW measurements in Sherbrooke, Quebec, Canada. It was then tested in Nunavik, Quebec, with the Advanced Microwave Scanning Radiometer for the Earth Observing System (AMSR‐E). We obtained a detection accuracy of 57, 71 and 89% for ROS detection for three AMSR‐E grid cells with a maximum error of 7% when considering all omissions and commissions with regard to the total number of AMSR‐E passes throughout the winter period. Copyright © 2016 John Wiley & Sons, Ltd.     

Space- and ground-based measurements of sulphur dioxide emissions from Turrialba Volcano (Costa Rica)

Remotely sensed measurements of sulphur dioxide (SO₂) emitted by Turrialba Volcano (Costa Rica) are reported for the period September 2009–January 2011. These measurements were obtained using images from Advanced Spaceborne Thermal Emission and Reflexion radiometer, Ozone Monitoring Instrument and a ground-based UV camera. These three very different instruments provide flux measurements in good agreement with each other, which demonstrate that they can be integrated for monitoring SO₂ fluxes. Fluxes from Turrialba increased fourfold in January 2010, following a phreatic explosion that formed a degassing vent in the W crater of Turrialba. Since then, the SO₂ flux has remained high (30–50?kg/s) but seems to be showing a slowly decreasing trend. We interpret this evolution as the start of open vent degassing from a recently intruded magma body. The opening of the degassing vent decreased the confining pressure of the magma body and allowed the gases to bypass the hydrothermal system.     

Estimating River Conductance from Prior Information to Improve Surface‐Subsurface Model Calibration

Most groundwater models simulate stream‐aquifer interactions with a head‐dependent flux boundary condition based on a river conductance (CRIV). CRIV is usually calibrated with other parameters by history matching. However, the inverse problem of groundwater models is often ill‐posed and individual model parameters are likely to be poorly constrained. Ill‐posedness can be addressed by Tikhonov regularization with prior knowledge on parameter values. The difficulty with a lumped parameter like CRIV, which cannot be measured in the field, is to find suitable initial and regularization values. Several formulations have been proposed for the estimation of CRIV from physical parameters. However, these methods are either too simple to provide a reliable estimate of CRIV, or too complex to be easily implemented by groundwater modelers. This paper addresses the issue with a flexible and operational tool based on a 2D numerical model in a local vertical cross section, where the river conductance is computed from selected geometric and hydrodynamic parameters. Contrary to other approaches, the grid size of the regional model and the anisotropy of the aquifer hydraulic conductivity are also taken into account. A global sensitivity analysis indicates the strong sensitivity of CRIV to these parameters. This enhancement for the prior estimation of CRIV is a step forward for the calibration and uncertainty analysis of surface‐subsurface models. It is especially useful for modeling objectives that require CRIV to be well known such as conjunctive surface water‐groundwater use.     

HydroCube: an entity-relationship hydrogeological data model

Managing, handling and accessing hydrogeological information depends heavily on the applied hydrogeological data models, which differ between institutions and countries. The effective dissemination of hydrogeological information requires the convergence of such models to make hydrogeological information accessible to multiple users such as universities, water suppliers, and administration and research organisations. Furthermore, because hydrogeological studies are complex, they require a wide variety of high-quality hydrogeological data with appropriate metadata in clearly designed and coherent structures. A need exists, therefore, to develop and implement hydrogeological data models that cover, as much as possible, the full hydrogeological domain. A new data model, called HydroCube, was developed for the Walloon Region in Belgium in 2005. The HydroCube model presents an innovative holistic project-based approach which covers a full set of hydrogeological concepts and features, allowing for effective hydrogeological project management. The model stores data relating to the project locality, hydrogeological equipment, and related observations and measurements. In particular, it focuses on specialized hydrogeological field experiments such as pumping and tracer tests. This logical data model uses entity-relationship diagrams and it has been implemented in the Microsoft Access environment. It has been enriched with a fully functional user interface.     

Early Miocene adakite-like volcanism in the Balkuyumcu region, central Anatolia, Turkey: Petrology and geochemistry

The Balkuyumcu region, located in the southwestern part of Ankara in the Izmir-Ankara suture zone (central Anatolia, Turkey), consists of basic andesitic, andesitic, dacitic and rhyolitic rocks extruded during the Early Miocene (20–22 Ma) as a result of post-collisional volcanism. Balkuyumcu volcanic rocks can be divided into two groups on the basis of their mineralogy and composition: The basic andesitic (BA) and andesitic, dacitic and rhyolitic (ADR) groups. The ADR and BA group of rocks have adakite-like and calc-alkaline characteristics, respectively. The ADR group has higher SiO₂ content, Sr/Y and La/Yb ratios and low MgO, Mg#, Y and Yb contents than the BA group. Both groups have nearly the same Sr, Nd isotopic compositions and display similar normalized multi-element patterns with enrichments in LILE and LREE, depletions in Nb, Ti, Zr, P and a lack of Eu anomalies. Major, trace element and Sr, Nd isotopic data indicate that both groups of rocks were derived from the same source but affected by different magmatic processes during ascent. The adakite-like rocks may have been produced by partial melting of thickened lower continental crust. Fractional crystallization also played a major role in their formation. However, the BA group rocks were derived from partial melting of lower continental crust that was probably delaminated. These rocks appear to have had limited interaction with mantle peridodite during ascent to the surface.     

Tracing of variabilities within a geological barrier by molecular organic geochemistry.: Case of the Callovo-Oxfordian sedimentary series in the East of the Paris Basin (France)

The Callovo-Oxfordian claystones located at 500 m depth at Bure (Meuse, France) are currently being investigated by Andra (the French National Radioactive Waste Management Agency) for testing the feasibility of long-term and deep geological nuclear waste disposal. In order to evaluate its potential as a geological barrier, it is very important to study, assess and describe its physico-chemical variability. The molecular biomarker composition of 150 samples of these claystones and their surrounding limestones carry diverse information on the sources of the sedimentary organic matter, the chemistry of the depositional environment, the preservation and diagenesis conditions. It also allows assessing the degree of lateral and vertical variability of the organic matter within these sedimentary series. The abundance of unsaturated biomarkers, the distribution of steroids and hopanoids and CPI values >2 prove the thermal immaturity of the organic matter. The co-occurrence of plankton, bacteria and land plant biomarkers indicate that the organic matter is a mixture of marine and continental contributions. The data also reveal that the organic matter was deposited under oxic and open-sea conditions except for a brief event of photic zone anoxia at the beginning of the Middle Callovian. In the claystones, the geosynthesis of diasterenes is favored to the detriment of the formation of steranes, especially in smectite-rich levels, and the organic matter is rapidly isolated from oxidizing then reducing conditions after the deposition due to the protective effect of clays. On the scale investigated, the claystones are characterized by a unique molecular facies and are thus homogenous from their organic content point of view. Yet, detailed investigation of specific molecular families indicates changes related to major claystone–limestone transitions. The homogeneity of these claystones can be explained by the paleogeographic position of their depositional setting and the plane and sub-horizontal paleotopography on which they were deposited. This study demonstrates the efficiency of organic geochemistry in the assessment of the variability of geological barriers.