Microbial responses using denaturing gradient gel electrophoresis to oil and chemical dispersant in enclosed ecosystems

Microbial responses to the addition of oil with or without a chemical dispersant were examined in mesocosm and microcosm experiments by using denaturing gradient gel electrophoresis of bacterial ribosomal DNA and direct cell counting. When a water-soluble fraction of oil was added to seawater, increases in cell density were observed in the first 24h, followed by a decrease in abundance and a change in bacterial species composition. After addition of an oil-dispersant mixture, increases in cell density and changes in community structure coincided, and the amount of bacteria remained high. These phenomena also occurred in response to addition of only dispersant. Our results suggest that the chemical dispersant may be used as a nutrient source by some bacterial groups and may directly or indirectly prevent the growth of other bacterial groups.     

Penetration into low-density media: In situ observation of penetration process of various projectiles

In order to understand the penetration process of projectiles into lower-density targets, we carry out hypervelocity impact experiments using low-density (60 mg cm^?3) aerogel targets and various types of projectiles, and observe the track formation process in the targets using a high-speed camera. A carrot shaped track, a bulbous, and a “hybrid” one consisting of bulbous and thin parts, are formed. The results of the high-speed camera observations reveal the similarity and differences on the temporal evolution of the penetration depth and maximum diameter of these tracks. At very early stages of an impact, independent of projectile type, the temporal penetration depth is described by hydrodynamic models for the original projectiles. Afterward, when the breakup of projectiles does not occur, intact projectiles continue to penetrate the aerogels. In the case of the breakup of projectiles, the track expands with a velocity of about a sound velocity of the aerogel at final stages. If there are large fragments, they penetrate deeper and the tracks become a hybrid type. The penetration of the large fragments is described by hydrodynamic models. Based on these results, we discuss the excavation near the impact point by shock waves.     

Long-term precipitation and stream discharge records at seven forested experimental watersheds along a latitudinal transect in Japan: Jozankei,Kamabuchi, Takaragawa,Tsukuba, Tatsunokuchi-yama,Kahoku and Sarukawa

This data note introduces a database of long-term daily total precipitation and stream discharge data for seven forested watersheds in Japan that have been continuously monitored by the Forestry and Forest Products Research Institute. Three of the watersheds started data collection in the 1930s. Forest cover across the sites ranges from cool to warm temperate regions with the latitude spanning from 31 to 44° N and annual precipitation ranging from 1200 to 3000 mm yr⁻¹. The effects of vegetation change via clearcutting, thinning and forest fire (among other stressors) on stream discharge can be analysed from the long-term observation sites. Moreover, this multi-site dataset allows for inter- and intra-site comparisons of annual water loss (difference of annual precipitation and stream discharge). These long-term datasets can provide comprehensive insights into the effects of climate change and other stressors on forested ecosystems, not only in Japan but across a spectrum of forest types, if combined with other long-term records from other forested watersheds across the world.     

Spinifex-like textured metaperidotites from the Higo Metamorphic Rocks,Japan, a possible high-pressure dehydration product of antigorite serpentinite

Spinifex-like textured metaperidotites from the Higo Metamorphic Rocks (HMR), west-central Kyushu, Japan, may be formed by high-pressure dehydration of antigorite, and may indicate deep subduction of serpentinite reaching a pressure–temperature condition of 1.6 GPa and 740–750 °C. Three rock types have been identified based on mineral assemblage and rock texture: Type I (L) consisting of medium-grained (1–5 cm long) olivine + enstatite + chromite ±tremolite with secondary talc and anthophyllite that occurs in low-grade metamorphic rocks of the biotite zone, Type I (H) of coarse-grained (up to 10 cm long) olivine + enstatite (with clinoenstatite lamella) + chromite ±tremolite with secondary talc that occurs in high-grade metamorphic rocks of the garnet-cordierite zone, and Type II composed of Al-spinel + chlorite + olivine + apatite + ilmenite with minor sodic gedrite in the garnet-cordierite zone together with Type I (H). Olivines in all rock types are mostly serpentinized during exhumation. The chromite-olivine thermometer gives 560–690 °C for Type I (L) rocks, and the spinel-olivine thermometer gives 610–740 °C for Type II rocks. The peak metamorphic pressure will be higher than 1.6 GPa based on the location of the experimentally determined invariant point (P = 1.6 GPa and T = 670 °C) of antigorite + forsterite + enstatite + talc + H₂O. This estimate is consistent with the occurrence of chlorite in Type II rocks, which is stable up to 890 °C at 2.0 GPa. The spinifex-like textured metaperidotites occur as small bodies in the low P/T type gneisses, implying tectonic juxtaposition of them probably during exhumation of the HMR. Recent findings of medium pressure (0.9–1.2 GPa) granulites and gneisses from the HMR may indicate that the HMR has a deep root into the wedge mantle from which the spinifex-like textured metaperidotites have derived.     

Investigation of local time dependence of Mercury's sodium exosphere based on a numerical simulation

Mercury has a surface-bounded exosphere (SBE) similar to that of the Moon. One of the atmospheric species, sodium, was found by ground-based observations to be the most prominent component. Mercury's sodium SBE is known to be non-uniform with respect to local time (LT) in low-latitude regions: the sodium column density in the dawn-side region is larger than that in the dusk-side region, and the sodium abundance is the largest in the morning-noon region. To reveal the production processes for the exosphere near Mercury's surface, the LT dependence of the exosphere was investigated through a numerical simulation. Three data sets of sodium column densities observed for the dawn-side hemisphere, observed by Sprague et al. [1997. Distribution and abundance of sodium in Mercury's atmosphere, 1985-1988. Icarus 12, 506-527], were compared with results simulated by a 3D Monte Carlo method, and the source rates and density of sodium of the planetary surface were estimated. In the simulation, the photon-stimulated desorption (PSD) and thermal desorption (TD) processes were assumed as the release mechanisms. The sodium source rates for the three data sets, at respective heliocentric distances of about 0.33, 0.42, and 0.44 AU, were estimated as 1-4×10⁸ Na/cm²/s with weak LT dependence. In contrast, the expected sodium surface density showed clear dependence on LT and the heliocentric distance. The sodium surface density decreases from early morning to noon by a few orders, and, particularly for large heliocentric distances, the surface is in a condition of sodium excess and depletion with respect to the surface sodium density assumed by Killen et al. [2004. Source rates and ion recycling rates for Na and K in Mercury's atmosphere. Icarus 171, 1-19] in the early morning and morning-noon regions, respectively. This study implies that the decrease in sodium surface density from the early morning to noon regions might produce the characteristic LT dependence in the low-latitude dawn-side region.     

Origin of a unique impact-melt rock—the L-chondrite Ramsdorf

Abstract— We have studied a unique impact-melt rock, the Ramsdorf L chondrite, using optical and scanning microscopy and electron microprobe analysis. Ramsdorf contains not only clast-poor impact melt (Begemann and Wlotzka, 1969) but also a chondritic portion (>60 g) with what appears at low magnification to be a normal, well-defined chondritic texture. However, detailed studies at high magnification show that >90 vol% of the crystals in the chondritic portion were largely melted by the impact: the chondrules lack normal microtextures and are ghosts of the original features. The only relics from the precursor chondrules are olivine crystals, which have the highest melting temperature (～1620 °C). Pyroxene-rich chondrules were so extensively melted that no phenocrysts were preserved and the melt crystallized in situ before significant mixing with exterior olivine-rich melts. Fine-grained pyroxene chondrule ghosts have sharper boundaries with the matrix than porphyritic olivine and pyroxene chondrule ghosts, probably because pyroxene-rich melts are significantly more viscous. Complex textures that formed by injection of melt along cracks and fractures in relic olivines suggest that the chondritic portion of Ramsdorf formed directly from petrologic type 3–4 material by strong shock. We infer that Ramsdorf was largely melted by shock pressures of ～75–90 GPa and that chondrule ghosts and relic olivine phenocrysts were locally preserved by rapid cooling. Quenching was not due to the addition of cold clasts into the melt but to heterogeneous shock heating that only caused internal melting of large olivines and pyroxenes. Ramsdorf appears to be one of the most heavily shocked meteorites that has retained some trace of its original texture.     

Calibration and validation of the ocean color version-3 product from ADEOS OCTS

We present calibration and validation results of the OCTS’s ocean color version-3 product, which mainly consists of the chlorophyll-a concentration (Chl-a) and the normalized water-leaving radiance (_nL_w). First, OCTS was calibrated for the inter-detector sensitivity difference, offset, and absolute sensitivity using external calibration source. It was also vicariously calibrated using in-situ measurements for water (Chl-a and_nL_w) and atmosphere (optical thickness), which were acquired synchronously with OCTS under cloud-free conditions. Second, the product was validated using selected 17 in-situ Chl-a and 11 in-situ_nL_w measurements. We confirmed that Chl-a was estimated with an accuracy of 68% for Chl-a less than 2 mg/m³, and_nL_w from 94% (band 2) to 128% (band 4). Geometric accuracy was improved to 1.3 km. Stripes were significantly reduced by modifying the detector normalization factor as a function of input radiance.     

Mechanisms of the southward translation of meddies

Meddies are warm and saline anticyclonic eddies found at the mid-depth of the Mediterranean Outflow in the Eastern North Atlantic. They are observed to move almost southward at average speeds as high as 1.3±0.2 cm s⁻¹. This paper examines a mechanism which accelerates this curious translation to a reasonable speed when combined with nonlinearity and a suitable vertical eddy structure. This mechanism is thepseudo-topographic β effect due to the westward decrease in the thickness of the mid-layer induced by the surface southward mean current. The linear dispersion relation including this effect is shown to account for a quarter of the surface southward mean current or a fifth of the observed southward translation of meddies. Three-layer quasi-geostrophic experiments reveal that the surface southward mean current certainly enhances the southward translation velocity of meddies to a speed in agreement with observation, if the meddy has a current structure of plausible intensity and vertical coherence. In the light of the current-induced pseudo-topographic β effect, previous hypotheses are also re-examined through dynamic arguments together with numerical experiments; they are suggested to have some difficulty either in dynamics or in correspondence with observation. Thus the nonlinear effect due to secondary eddies combined with thecurrent-induced pseudo-topographic β effect is the most likely mechanism responsible for the rapid southward translation of meddies among those examined in the paper.     

郯庐断裂中段的早白垩世拉分盆地(英文)

石场－中楼盆地位于郯庐断裂带中段的沂河－沭河地区。郯庐断裂左旋切割了秦岭－大别－胶南造山带及前中生代地层,研究区内沂河－沭河断裂切割了年龄为１３６．２Ｍａ（４０Ａｒ／３９Ａｒ法）的胶南造山带北缘剪切带,并被时代为１１９Ｍａ（Ｋ－Ａｒ法）的青山群地层不整合覆盖,显示郯庐断裂在早白垩世曾发生了明显的走滑运动。石场－中楼盆地受沂河－沭河断裂的控制,整体为长６０ｋｍ、宽３０ｋｍ,长宽比近于２∶１的“菱型”构造盆地。盆地内早白垩世莱阳群的沉积厚度大于６２６３．７１ｍ,沉积速率大于０．４ｍｍ／ａ;沉积相特征反映盆地具有深而窄,沉积速度快、沉积相变剧烈的特点。盆地沉积中心的迁移方向与边界断裂的左旋走滑效应一致,“边走滑边沉积”的特征明显。根据构造背景、构造格架及沉积特征,确定石场－中楼盆地为郯庐断裂早白垩世左旋走滑过程中形成的拉分盆地     

Polymetallic Mineralization at the Shin-Ohtoyo Deposit, Harukayama District, Hokkaido, Japan

Abstract: The Shin-Ohtoyo Cu–Au deposit is located in the Harukayama district, 20 km west of Sapporo, Hokkaido, Japan. Both acid-type disseminated and adularia–quartz–type vein Au mineralizations have been recognized within a small distance of less than 500 m in the district. Mineralogical characteristics of sulfide ores from the Shin-Ohtoyo deposit have been proved to be polymetallic. Ore minerals containing Sn, V, Bi and Te are recognized. Nine ore types are recognized in terms of characteristic mineral assemblage; (1) chalcedonic quartz veinlets in silicified zone around the deposit, (2) bismuthinite, emplectite, friedrichite and tetrahedrite, (3) an unnamed Cu–Sn–Fe–Zn sulfide, colusite-series minerals, stannoidite, emplectite and tetrahedrite, (4) bournonite, Se-bearing galena and tetrahedrite, (5) luzonite/famatinite and Ag-bearing tetrahedrite, (6) colusite-series minerals, emplectite, aikinite and tetrahedrite/goldfieldite, (7) luzonite/famatinite, colusite-series minerals, mawsonite and tetra–hedrite/goldfieldite, (8) enargite, luzonite/famatinite and tetrahedrite, and (9) colusite-series minerals and tetrahedrite. The first occurrence of friedrichite and stibiocolusite from Japan are reported. The chemical formula of the unnamed phase corresponds to Cu₆(Cu, Fe, Zn)Sn₃S₁₀. Sulfur isotopic ratios (δ³⁴S) of sulfides from the stockpile range from –0. 5% to +1. 9%, and those from drill cores recovered by Metal Mining Agency of Japan (MMAJ) vary from –2. 7% to +0. 8%. Sulfur isotopic ratio of barite in a cavity in the silicified tuff breccia collected from the stock pile yields +27. 1%, while that of barite collected from MMAJ core is +21. 7%. Sulfur isotopic thermometry applied for a pair of barite (+21. 7%) and associated pyrite (+1. 8%) indicates about 300°C. High–Te tetrahedrite composition from both the chalcedonic quartz vein in the silicified zone around the Shin-Ohtoyo deposit and the polymetallic sulfide ores from the adit of the deposit, suggests that the Au mineralization in the former is attributed to a hydrothermal system marginal to the polymetallic mineralization.