Distribution of microzooplankton in the Philippine Sea and the Celebes Sea in summer, 1972

Regional and vertical distribution of the microzooplankton in the Philippine and the Celebes Seas is reported in relation to the phytoplankton distribution. The maximum concentration of chlorophylla occurred at the surface in the Celebes Sea and in subsurface layer (50–150 m depth) in the Philippine Sea. On the other hand, the maximum occurrence of the microzooplankton was observed in the subsurface layer (50–150 m) throughout these sea areas; discrepancy in the vertical positions of the chlorophylla and microzooplankton maxima was observed in the former sea area. The higher dominancy of large-sized phytoplankton such as diatoms andTrichodesmium at the surface maximum, probably because most large-sized phytoplankton were uningestible for the microzooplankton, was the main reason why the discrepancy existed in the Celebes Sea. In the Philippine Sea, where the subsurface chlorophylla maximum layer was formed mainly by small-sized phytoplankton such as coccolithophorids and small dinoflagellates, such a discrepancy was not observed. These may indicate the establishment of a close food relationship between the microzooplankton and the small-sized phytoplankton rather than to the large-sized phytoplankton.     

The Meteoritical Bulletin,No. 92, 2007 September

Abstract— In this edition of The Meteoritical Bulletin, 1394 recognized meteorites are reported, 27 from specific locations within Africa, 133 from Northwest Africa, 1227 from Antarctica (from ANSMET, PNRA, and PRIC expeditions), and 7 from Asia. The Meteoritical Bulletin announces the approval of four new names series by the Nomenclature Committee of the Meteoritical Society, two from Africa and one from Asia, including Al Haggounia, from Al Haggounia, Morocco, which is projected to be on the order of 3 metric tons of material related to enstatite chondrites and aubrites. Approved are two falls from Africa, Bassikounou (Mauritania) and Gashua (Nigeria). Approved from areas other than Antarctica are one lunar, two Martian, 32 other achondrites, three mesosiderites, two pallasites, one CM, two CK, one CR2, two CV3, one CR2, and four R chondrites. The Nomenclature Committee of the Meteoritical Society announces 48 newly approved relict meteorites from two new name series, Österplana and Gullhögen (both from Sweden).     

Geology of the Gorny Altai subduction–accretion complex, southern Siberia: Tectonic evolution of an Ediacaran–Cambrian intra-oceanic arc-trench system

The Gorny Altai region in southern Siberia is one of the key areas in reconstructing the tectonic evolution of the western segment of the Central Asian Orogenic Belt (CAOB). This region features various orogenic elements of Late Neoproterozoic–Early Paleozoic age, such as an accretionary complex (AC), high-P/T metamorphic (HP) rocks, and ophiolite (OP), all formed by ancient subduction–accretion processes. This study investigated the detailed geology of the Upper Neoproterozoic to Lower Paleozoic rocks in a traverse between Gorno-Altaisk city and Lake Teletskoy in the northern part of the region, and in the Kurai to Chagan-Uzun area in the southern part. The tectonic units of the studied areas consist of (1) the Ediacaran (=Vendian)–Early Cambrian AC, (2) ca. 630 Ma HP complex, (3) the Ediacaran–Early Cambrian OP complex, (4) the Cryogenian–Cambrian island arc complex, and (5) the Middle Paleozoic fore-arc sedimentary rocks. The AC consists mostly of paleo-atoll limestone and underlying oceanic island basalt with minor amount of chert and serpentinite. The basaltic lavas show petrochemistry similar to modern oceanic plateau basalt. The 630 Ma HP complex records a maximum peak metamorphism at 660 °C and 2.0 GPa that corresponds to 60 km-deep burial in a subduction zone, and exhumation at ca. 570 Ma. The Cryogenian island arc complex includes boninitic rocks that suggest an incipient stage of arc development. The Upper Neoproterozoic–Lower Paleozoic complexes in the Gorno-Altaisk city to Lake Teletskoy and the Kurai to Chagan-Uzun areas are totally involved in a subhorizontal piled-nappe structure, and overprinted by Late Paleozoic strike-slip faulting. The HP complex occurs as a nappe tectonically sandwiched between the non- to weakly metamorphosed AC and the OP complex. These lithologic assemblages and geologic structure newly documented in the Gorny Altai region are essentially similar to those of the circum-Pacific (Miyashiro-type) orogenic belts, such as the Japan Islands in East Asia and the Cordillera in western North America. The Cryogenian boninite-bearing arc volcanism indicates that the initial stage of arc development occurred in a transient setting from a transform zone to an incipient subduction zone. The less abundant of terrigenous clastics from mature continental crust and thick deep-sea chert in the Ediacaran–Early Cambrian AC may suggest that the southern Gorny Altai region evolved in an intra-oceanic arc-trench setting like the modern Mariana arc, rather than along the continental arc of a major continental margin. Based on geological, petrochemical, and geochronological data, we synthesize the Late Neoproterozoic to Early Paleozoic tectonic history of the Gorny Altai region in the western CAOB.     

Simplified seismic design approach for steel portal frame piers with hysteretic dampers

A simplified seismic design procedure for steel portal frame piers installed with hysteretic dampers is proposed, which falls into the scope of performance‐based design philosophy. The fundamental goal of this approach is to design a suite of hysteretic damping devices for existing and new bridge piers, which will assure a pre‐defined target performance against future severe earthquakes. The proposed procedure is applicable to multi‐degree‐of‐freedom systems, utilizing an equivalent single‐degree‐of‐freedom methodology with nonlinear response spectra (referred to as strength‐demanded spectra) and a set of formulae of close‐form expressions for the distribution of strength and stiffness produced in the structure by the designed hysteretic damping devices. As an illustrative example, the proposed procedure is applied to a design of a simple steel bridge pier of portal frame type with buckling‐restrained braces (one of several types of hysteretic dampers). For the steel portal frame piers, an attempt is made to utilize not only the displacement‐based index but also the strain‐based index as pre‐determined target performance at the beginning of design. To validate this procedure, dynamic inelastic time‐history analyses are performed using the general‐purpose finite element program ABAQUS. The results confirm that the proposed simplified design procedure attains the expected performance level as specified by both displacement‐based and strain‐based indices with sufficient accuracy. Copyright © 2006 John Wiley & Sons, Ltd.     

Spatial gradient analysis of urban green spaces combined with landscape metrics in Jinan City of China

1IN T R O D U C T IO NUrban green spaces can be consideredas the outdoorplacesintheurban covered with significanatmounts ofvegetation,naturalor manmade,as opposed to areasthatare paved or having buildingon them(JIM andC HEN,2003;SHIVANAND and SUZANA,2005)…     

Geneses of High Chlorine and Silver–Lead–Zinc–Mineralized Granitoids in Tsushima, Japan

Abstract: Miocene granitoids of the Tsushima Islands have unique characteristics that cannot be seen in other major granitic plutons in the Japanese Islands as follows: (1) They are granitic in composition but contain synplutonic mafic dikes, abundant mafic enclaves, and intermediate facies between granite and mafic enclaves. (2) They are mixture of magnetite‐bearing and –free facies, but generally magnetite‐free in the marginal part. (3) They are high in K₂O content (K₆₅=3. 1) and intermediate in normative corundum (C₆₅=0. 1) and δ¹⁸O value (+9% at SiO₂ 70 %), which may be comparable with those of the Miocene Outer Zone granitoids. (4) Yet the initial Sr ratio is low as 0. 7037. (5) They are high in Cl and S, which occur in fluid inclusions and as pyrrhotite>pyrite, respectively. Two genetic models are considered for the source of the unique granitoid magmas: the continental crust or the upper mantle fertilized with Si, K and ¹⁸O. The latter may be the case for the Tsushima granitoids, because of the low initial Sr ratio. The age of the granitoids (16 Ma) indicates the magmatism related to the opening of the Sea of Japan. It is suggested that both basaltic and granitic magmas were generated in the continental lithosphere under an extensional tectonic setting; the two magmas could have been partly mingled. The mingled magma was originally an oxidized type, but reduced during the emplacement by repeated inflow of S and C‐bearing gases from the pelitic wall rocks. Because of the reduction, SO₃ sulfur is almost nil in the rock‐forming apatite, and most of sulfur remained in fluid phase of the magma as reduced species. Cl content was high in the original magma and concentrated in the fluid phase of the residual system which dissolved silver, lead and zinc metals. Such a fluid migrated into the Taishu fracture systems, as the magma crystallized, and formed the silver–lead–zinc deposits.     

Sulfur Isotope Study and Re-examination of Ore Mineral Assemblage of the Hol Kol and the Tul Mi Chung Skarn-type Copper–Gold Deposits of the Suan Mining District, Korean Peninsula

Abstract: Ore specimens collected by the late Professor Takeo Watanabe from the Hol Kol and the Tul Mi Chung deposits, Suan mining district, Korean peninsula, were examined. In addition, measurements of sulfur isotopic ratio of ores and preliminary fluid inclusion microthermometry were carried out. Ores from the New orebody of the Hol Kol deposit consist mainly of bornite, wittichenite and chalcopyrite presently, which exhibit lamellae intergrowth texture, associated with native bismuth and electrum. Bismuthian bornite solid solution is considered to be a principal initial phases, while native bismuth was nucleated as molten bismuth melt initially. The occurrence of cubanite, miharaite, carrollite, siegenite, hessite and geikielite are recognized from the New orebody. Ores from the Eastern orebody of the Hol Kol deposit consist chiefly of chalcopyrite, occasionally associated with trace amounts of pyrrhotite, pyrite, bismuthinite and rare tellurobismuthite, while an ore specimen from the Western orebody consists mainly of sphalerite associated with chalcopyrite, pyrite and galena. Ores from the Tul Mi Chung deposit consist mainly of chalcopyrite and pyrite, occasionally associated with magnetite, sphalerite, galena and rare molybdenite. Some portions of magnetite are revealed to be silician magnetite. Sulfur fugacity is supposed to be below the stability field of bismuthinite in the New orebody. A reducing condition is suggested by the occurrence of geikielite without Fe³⁺ content. The sulfur and oxygen fugacities for the Eastern and Western orebodies of the Hol Kol deposit and for the Tul Mi Chung deposit were higher than the New orebody of the Hol Kol deposit. On the other hand, the Suan granite (porphyritic granodiorite) and the Chil Sing Dai granite (biotite granite porphyry) from the Hol Kol area can be classified as weakly magnetic magnetite‐series. Polyphase fluid inclusions are observed in gangue diopside associated with Cu ore of two specimens. The dissolution temperatures of daughter crystals are 394±26°C and 442±45°C, while the disappearing temperatures of vapor bubble were 475±25°C and > 500°C. Highly saline fluids were responsible for the mineralization at the Hol Kol deposit. The δ³⁴S values of ore sulfides of the Hol Kol and the Tul Mi Chung deposit range from +11. 5% to +16. 1%, having anomalous lower values mainly from the Tul Mi Chung deposit. Such anomalous lower 6³⁴S values can be caused by isotopic fractionation against oxidized sulfur species. The δ³⁴S value of bulk sulfur in the ore solutions responsible for the Hol Kol and the Tul Mi Chung deposit is estimated to be +13.5±2.5‰.     

Downslope soil detachment–transport on steep slopes via rain splash

This study developed a one‐dimensional model of downslope rain splash transport based on field experiments and previous studies. The developed model considers soil detachment processes, ground cover, probability densities, and the effect of overland run‐off in preventing detachment. Field monitoring was conducted to observe precipitation run‐off, ground cover, and sediment production on steep hillslopes. Field‐observed data were used to develop the splash detachment rate equation, probability densities for splash transport, and the maximum splash transport distance. Observed and estimated splash transport showed overall agreement, with some differences for small storm events or events with relatively low intensity, probably caused by variation of overland run‐off depth and connectivity as well as differences in soil surface cohesion at various degrees of wetness. Our model can provide insights on the interactions among rainfall intensity, soil surface condition, soil wetness, and splash transport on forested hillslopes. Copyright © 2011 John Wiley & Sons, Ltd.     

Short‐term flood inundation prediction using hydrologic‐hydraulic models forced with downscaled rainfall from global NWP

A short‐term flood inundation prediction model has been formulated based on the combination of the super‐tank model, forced with downscaled rainfall from a global numerical weather prediction model, and a one‐dimensional (1D) hydraulic model. Different statistical methods for downscaled rainfall have been explored, taking into account the availability of historical data. It has been found that the full implementation of a statistical downscaling model considering physically‐based corrections to the numerical weather prediction model output for rainfall prediction performs better compared with an altitudinal correction method. The integration of the super‐tank model into the 1D hydraulic model demonstrates a minimal requirement for the calibration of rainfall–runoff and flood propagation models. Updating the model with antecedent rainfall and regular forecast renewal has enhanced the model's capabilities as a result of the data assimilation processes of the runoff and numerical weather prediction models. The results show that the predicted water levels demonstrate acceptable agreement with those measured by stream gauges and comparable to those reproduced using the actual rainfall. Moreover, the predicted flood inundation depth and extent exhibit reasonably similar tendencies to those observed in the field. However, large uncertainties are observed in the prediction results in lower, flat portions of the river basin where the hydraulic conditions are not properly analysed by the 1D flood propagation model. Copyright © 2013 John Wiley & Sons, Ltd.     

Mineralogical alteration of a type A CAI from Allende CV3 chondrite: Formation of secondary dmisteinbergite and its phase transition to anorthite

Dmisteinbergite, a hexagonal form of CaAl₂Si₂O₈, was found in a compact type A Ca-Al-rich inclusion (CAI) in the Allende CV3 chondrite. Scanning and transmission electron microscopic observations show that dmisteinbergite was always in contact with grossular and grossular was in contact with melilite. In addition, there is a crystallographic relationship between dmisteinbergite and anorthite. Based on the textural and crystallographic evidence, the following mineralogical alteration processes are proposed to have occurred in the CAI. (1) Melilite was replaced by grossular. High densities of vesicles in the grossular indicate that hydrogrossular might have been the primary alteration phase and dehydrated by later metamorphism. (2) Dmisteinbergite formed from (hydro)grossular through a reaction with Si-rich fluid. (3) Nano-sized minerals are formed within dmisteinbergite. (4) Dmisteinbergite was transformed to anorthite. (5) Both anorthite and dmisteinbergite were altered to nepheline. (6) Hydrogrossular was dehydrated to grossular. (Hydro)grossular, dmisteinbergite, anorthite, and nepheline in the CAI seem to have formed in the course of metasomatism that occurred in the Allende parent body. Except for the hydrogrossular dehydration, these reactions could have occurred at moderate temperature (200–250°C) in high pH fluids (pH 13–14) according to past experimental studies. Episodic changes in fluid composition seem to have occurred before reactions (2), (4), and (5), because these reactions were not completed before the next reaction started. Higher temperature is required for reactions (5) and (6) to occur. Our observation of the CAI suggests that it experienced multiple episodes of metasomatism as temperatures were rising in the Allende parent asteroid.