The Meteoritical Bulletin,No. 97

Abstract– In this edition of The Meteoritical Bulletin, a total of 506 newly approved meteorite names with their relevant data are reported. These include 354 from northwest Africa, 31 from the Americas, 15 from Antarctica (Koreamet), 85 from Asia, 20 from Australia, and 1 from Europe. Among these meteorites are 2 falls, Grimsby (Canada) and Santa Lucia (2008) (Argentina). Also described are a CM with low degree of alteration, new ungrouped chondrites and achondrites, and 4 Martian meteorites.     

Predicting riverine dissolved silica fluxes to coastal zones from a hyperactive region and analysis of their first-order controls

Silicate weathering and resulting transport of dissolved matter influence the global carbon cycle in two ways. First by the uptake of atmospheric/soil CO₂ and second by providing the oceanic ecosystems via the fluvial systems with the nutrient dissolved silica (DSi). Previous work suggests that regions dominated by volcanics are hyperactive or even “hot spots” concerning DSi-mobilization. Here, we present a new approach for predicting DSi-fluxes to coastal zones, emphasizing “first-order” controlling factors (lithology, runoff, relief, land cover and temperature). This approach is applied to the Japanese Archipelago, a region characterized by a high percentage of volcanics (29.1% of surface area). The presented DSi-flux model is based on data of 516 catchments, covering approximately 56.7% of the area of the Japanese Archipelago. The spatial distribution of lithology—one of the most important first order controls—is taken from a new high resolution map of Japan. Results show that the Japanese Archipelago is a hyperactive region with a DSi-yield 6.6 times higher than the world average of 3.3 t SiO₂ km⁻² a⁻¹, but with large regional variations. Approximately 10% of its area exceeds 10 times the world average DSi-yield. Slope constitutes another important controlling factor on DSi-fluxes besides lithology and runoff, and can exceed the influence of runoff on DSi-yields. Even though the monitored area on the Japanese Archipelago stretches from about 31° to 46°N, temperature is not identified as a significant first-order model variable. This may be due to the fact that slope, runoff and lithology are correlated with temperature due to regional settings of the Archipelago, and temperature information is substituted to a certain extent by these factors. Land cover data also do not improve the prediction model. This may partly be attributed to misinterpreted land cover information from satellite images. Implications of results for Earth System and global carbon cycle modeling are discussed.     

Simple monitoring method for precaution of landslides watching tilting and water contents on slopes surface

A low-cost and simple monitoring method for early warning of landslides is proposed. To detect abnormal deformation of a slope, this method employs a tilt sensor in place of an extensometer on the slope surface. In order to examine the relevance of measuring rotation angle on a slope surface by tilt sensor, model tests were conducted, and rotation on the slope surface was observed together with slide displacement along the surface. The rotation data responded 30 min before failure in a model test, which could be useful as a signal for early warning. However, the behavior of rotation before failure varies from case to case, and thus, criteria to issue warning should be defined more carefully. For a model slope made of uniform loose sand, measurement of slide displacement along the slope surface is sensitive to failure at the toe, while the measurement of rotation on the slope surface is useful to detect the development of progressive failure upward along the slope. Wireless sensor units with microelectromechanical systems (MEMS) tilt sensor and volumetric water content sensor were also examined on a real slope in Kobe City, and a long-term monitoring was attempted. A simple but possible way to define the criteria of judgment to issue warning can be proposed based on combination of data obtained by the tilt sensors and volumetric water content sensors.     

Arsenic contamination of ground and pond water and water purification system using pond water in Bangladesh

This paper, firstly, shows the distribution of arsenic-contaminated groundwater in Samta village. This village, which is in Jessore district in Bangladesh, was chosen as a model village for investigating the mechanism of groundwater contamination. 90% of the tube wells in this village had arsenic concentrations above the Bangladesh standard of 0.05 mg/l. Tube wells with arsenic concentrations of over 0.50 mg/l were distributed in the southern part of the village with a belt-like shape from east to west. Secondly, groundwater distribution is discussed with respect to its flow and the high arsenic zone (As≥0.50 mg/l) agrees well with the drifting zone of the groundwater. Furthermore, arsenic-free water supply systems suitable for a small area in the village have been developed. A pond sand filter (PSF) system which purifies pond water is discussed in this paper. Prior to the construction of the PSF, the water quality in ponds was examined for arsenic levels. The inflow of drainage from the tube wells was found to be the major cause of arsenic contamination of pond water. The PSF installed in Samta is working very well and produces a good quality of treated water.     

Generation and Evolution of Ore Fluids for Porphyry Cu-Au Mineralization of the Santo Tomas II (Philex) Deposit, Philippines

Abstract: The Santo Tomas II (Philex) deposit is a porphyry Cu‐Au deposit, located in the southern part of the Baguio mineral district, Benguet Province, northern Luzon, Philippines. The Santo Tomas II deposit is associated with an intrusive complex consisting of four rock types that are distinguished based on petrography. They are 1) post‐ore clinopyroxene‐bearing hornblende andesite porphyry, 2) ore‐generating hornblende andesite porphyry, 3) hornblende quartz diorite porphyry and 4) porphyritic hornblende quartz diorite. K‐Ar age of hydrothermal biotitization was estimated to be 1.5±0.4 Ma. A number of intrusive bodies having broadly similar petrography and K‐Ar age occur in the vicinity of the Santo Tomas II deposit, such as at Clifton, Ligay (Binang), Bumolo (Waterhole) and Philex Main Camp areas. The intrusions at the Santo Tomas II deposit and in the vicinity are characterized by high X_Mg (Mg/[Mg+Fe] atomic ratio, about 0.7 or higher) of mafic silicate phenocrysts such as hornblende, and high sulfur contents (> 0.2 wt% as SO₃) in accessory microphenocrystic apatite, suggesting a highly oxidizing condition. Sulfur is accommodated dominantly as oxidized species since the crystallization of phe‐nocrysts. Sub‐dendritic rim of tremolitic amphibole on hornblende phenocryst in the ore‐generating andesite porphyry at the Santo Tomas II deposit suggests interaction of magma and aqueous fluid(s) exsolved due to decompression during intrusion. Dissemination of magnetite is associated with hydrothermal biotitization and is followed by sheeted and stockwork quartz veinlets having silician magnetite and rare titanohematite instead of Cu‐Fe sulfides. The silician magnetite‐rich quartz veinlet was formed at f_O2 near the hematite‐magnetite buffer at nearly magmatic temperature, where sulfur dominantly existed as oxidized species such as SO₂. Chalcopyrite and bornite, which commonly exhibit micrographic texture often accompanying Pd telluride and native gold/Au‐rich electrum, are associated with subsequent anhydrite (‐quartz) veinlets and stringers. Both intermediate solid solution (iss) and bornite solid solution (bnss) are thought to have coprecipitated primarily at above 500°C based on fluid inclusion microthermometry and sulfur isotope thermometry applied for anhydrite and associated chal‐copyrite and bornite. The initial iss is considered to have converted to chalcopyrite partly replacing bnss during cooling. The hypersaline polyphase fluid inclusions abundantly found in the sheeted and stockwork quartz as well as anhydrite veinlets with scarce gaseous inclusions suggest that they have been trapped in the two aqueous fluid immiscible region. The western Luzon arc associated with porphyry Cu mineralization is characterized by oxidized hydrous magmatism and shallow emplacement, and by the source of sulfur enriched in ³⁴S.     

An experimental study on the formation of composite intrusions from zoned magma chambers

We present a model which accounts for the common, but paradoxical arrangement of composite intrusions (i.e. silicic core and mafic margins) on the basis of analogue experiments using gelatin and aqueous solutions. The present model involves simultaneous flow-out of the upper and lower magmas from a longitudinal crack along the chamber wall. Experimental results suggest that the mafic magma from the lower layer leaks from the side-wall of the chamber and travels faster than the silicic magma because of its lower viscosity, so that the mafic magma reaches the tip of the crack first. Once the mafic magma reaches the crack tip, then the rate of dyke propagation becomes determined by the viscosity of the less viscous mafic magma, and so it can advance rapidly. The viscous silicic magma can flow efficiently into the center of the dyke, being lubricated by the mafic magma margins. This model accounts for the common arrangement of composite intrusions and gives an efficient mechanism of flow of viscous silicic magmas.     

Volatilization of sodium from silicate melt spheres and its application to the formation of chondrules

The rates of volatilization of Na from liquid spheres of chondrule compositions have been determined as functions of time, temperature, partial pressure of oxygen, and sizes of the spheres. The Na₂O content in the sphere is uniform in each run. but it decreases with time of the run, indicating that the rate of diffusion of Na in the liquid is greater than that of volatilization, and that the latter is the rate-controlling process. The rate of sodium volatilization becomes greater with increasing temperature and with decreasing P_O2 and size of the spheres. The relation of the Na₂O content in the liquid sphere with time and its size indicate that the amount of Na₂O volatilized from the liquid spheres within unit time is proportional to the surface area of the spheres and the concentration of Na₂O in the liquid. From these relations, the rate of volatilization of sodium can be obtained at constant temperature and P_o2. The rate of volatilization of sodium satisfies the Arrhenius relation within the temperature range from about 1450–1600 C at 10^?9,2 atm p_O2; the activation energy for the sodium volatilization is approximately 100 kcal-mole^?1. The rate is also approximately proportional to within the range of p_O2 from 10^?10.2 to 10^?5.0 atm at about 1500° C. Based on the present results and the Na₂O contents in chondrules. it is suggested that they experienced an instant heating with maximum temperature of 1400–2200° C followed by an immediate cooling.     

An earthquake swarm in the northern part of the Aso caldera and migration of their foci

A seismicity gap was observed in the early stage of the activity of the earthquake swarm which has been taken place in the northern part of the Aso caldera during January 1975. In the following stage, small earthquakes began to occur, until at last the largest earthquake occured within the seismicity gap. The b-value appreciably increased after the largest earthquake. The above-mentioned characteristics of this earthquake swarm may be a typical example of the fracturing phenomena in relatively heterogeneous rocks. From the estimation of the ultimate strain energy that can be stored up in the seismicity gap, it may be concluded that the above-mentioned largest earthquake took place by the release of ultimate strain energy stored within the seismicity gap.     

Melting kinetics of a plagioclase feldspar

Partial melting experiments on plagioclase feldspar have been carried out to investigate textures and kinetics of the melting. A labradorite single crystal was heated at one atmosphere pressure and temperatures within its melting interval as a function of time. So called honeycomb, fingerprint, or sieve textures were produced except for the runs just below the liquidus. The melting was initiated by heterogeneous nucleation of melt at the surface and/or interior (cracks and possively dislocations) of the crystal. The pattern of the melt is dendritic with a few μm arm spacing. After the melt develops throughout the crystal, the volumes of melt and residual crystal become larger and smaller, respectively, without changing the arm spacings. The melt is homogeneous and has the approximate temperature dependent liquidus composition irrespective of the time. There are compositional gradients in the residual crystal after short periods of melting. The An content of the crystals increases with increasing time until it finally reaches equilibrium with the melt after several thousands minutes of heating. It is concluded that the enlargement of the melt, the main process of the melting, is controlled by diffusion in the crystal. The fact that partial melts have the composition of the equilibrium liquidus even from the first several minutes strongly suggests that the local equilibrium at the crystal-liquid interface is satisfied during the melting. Some of the honeycomb, fingerprint, and sieve textures found in xenoliths and phenocrysts of sodic plagioclase in volcanic rocks would be caused by heating events (such as magma mixing) during which temperatures of magmas were temporarily higher than the solidus of some of the minerals.