Evaluation of Vector Winds Observed by NSCAT in the Seas around Japan

In order to validate wind vectors derived from the NASA Scatterometer (NSCAT), two NSCAT wind products of different spatial resolutions are compared with observations by buoys and research vessels in the seas around Japan. In general, the NSCAT winds agree well with the wind data from the buoys and vessels. It is shown that the root-mean-square (rms) difference between NSCAT-derived wind speeds and the buoy observations is 1.7 ms^–1, which satisfies the mission requirement of accuracy, 2 ms^–1. However, the rms difference of wind directions is slightly larger than the mission requirement, 20°. This result does not agree with those of previous studies on validation of the NSCAT-derived wind vectors using buoy observations, and is considered to be due to differences in the buoy observation systems. It is also shown that there are no significant systematic trends of the NSCAT wind speed and direction depending on the wind speed and incidence angle. Comparison with ship winds shows that the NSCAT wind speeds are lower than those observed by the research vessels by about 0.7 ms^–1 and this bias is twice as large for data observed by moving ships than by stationary ships. This result suggests that the ship winds may be influenced by errors caused by ship's motion, such as pitching and rolling.     

Mineral Paragenesis, Fluid Inclusions and Sulfur Isotope Systematics of the Lepanto Far Southeast Porphyry Cu-Au Deposit, Mankayan, Philippines

Abstract: The Lepanto Far Southeast porphyry Cu‐Au deposit is located beneath and to the southeast of the Lepanto enargite‐luzonite Cu–Au deposit in Mankayan, Benguet Province, Philippines. The principal orebody consists of potassic alteration subjected to partial retrograde chlorite alteration that rims stock‐work of quartz‐anhydrite veinlets. Fluid inclusions found in stockwork quartz and anhydrite in the biotitized orebody center are dominated by polyphase inclusions that homogenize at temperatures of >500C. Sulfur isotopic thermometry applied to the sulfides‐anhydrite pairs suggests around 500C. The principal ore minerals associated with quartz‐anhydrite stockworks are chalcopyrite and pyrite with minor bornite and Bi–Te–bearing tennantite, with trace of native gold. Rounded pyrite grains appear fractured and corroded and are interpreted as remnants of primary intermediate solid solution + pyrite assemblage. A breccia pipe truncates the deposit. Mineralization in the breccia pipe is brought by quartz‐anhydrite veinlets and infilling in the interstices between clasts. Chalcopyrite‐Au mineralization associated with molybdenite is recognized in the deeper zone in the breccia pipe. Fluid inclusion microthermometry on polyphase inclusions in veinlet quartz as well as sulfur isotope thermometry applied for the pair of anhydrite and sulfides suggests >450C. Fluid inclusions in veinlet quartz and anhydrite in the fringe advanced argillic alteration are chiefly composed of coexisting liquid‐rich inclusions and gas‐rich inclusions, in addition to coexisting polyphase inclusions and gas‐rich inclusions. These inclusions exhibit a wide range of homogenization temperatures, suggesting heterogeneous entrapping in the two‐fluid unmixing region. Sulfur isotopes of aqueous sulfide and sulfate exhibit a general trend from the smallest fractionation pairs (about 11%) in the biotitized orebody center to the largest fractionation (about 25%) pairs in the fringe advanced argillic alteration, suggesting a simple evolution of hydrothermal system. The slopes of arbitrary regression lines in δ³⁴S versus ³⁴S[SO₄ = –H₂S] diagram suggest that the abundance ratio of aqueous sulfate to sulfide in the hydrothermal fluid has been broadly constant at about 1:3 through temperature decrease. The intersection of these two regression lines at the δ³⁴S axis indicates that the bulk δ³⁴S is about +6%. Thus, the Lepanto FSE deposit is a further example which confirms enrichment in ³⁴S in the hydrous intermediate to silicic magmas and associated magmatic hydrothermal deposits in the western Luzon arc.     

Variation of the southward interior flow of the North Pacific subtropical gyre,as revealed by a repeat hydrographic survey

Baroclinic variations of the southward flow in the interior region of the North Pacific subtropical gyre are presented with five hydrographic sections from San Francisco to near Japan during 2004–2006. The volume transport averaged temperature of the interior flow, which varies vigorously by a maximum of 0.8°C, is negatively correlated with the transport in the layer of density 24.5–26.5σ _θ, associated with changes in the vertical current structure. Transport variation in this density layer is thus mainly responsible for the thermal impact of the interior flow on the heat transport of the subtropical gyre.     

The Meteoritical Bulletin,No. 93, 2008 March

Abstract— In this edition of the Meteoritical Bulletin, 1443 approved meteorite names with their relevant data are reported, one from a specific location within Africa, 211 from Northwest Africa, 5 from KOREAMET, 598 from the Chinese Antarctic Expedition, 23 from the Americas, 151 from Asia, three from Australia, two from Europe, two from NOVA, and 447 from ANSMET that were not reported in the Meteoritical Bulletin no. 87. Also reported are 4 falls from the Americas. Some highlights of approved meteorites are 10 lunar (including NWA 5000, an 11.528 kg sample), 3 Martian, 4 irons (one from Indonesia), 2 ureilites, 5 mesosiderites, 1 pallasite, 6 brachinites, 3 CV3s, 4 CO3s, 8 CMs, 12 CK3s, and many more. Finally, the Committee on Nomenclature of the Meteoritical Society announces two new names series in North America.     

Dichothermal layer deepening in relation with halocline depth change associated with northward shrinkage of North Pacific western subarctic gyre in early 2000s

In the western subarctic North Pacific, a wind-driven cyclonic circulation, called the western subarctic gyre (WSAG), exists. We examined year-to-year changes of the gyre and hydrographic structures, applying the altimetry-based gravest empirical mode (AGEM) method to hydrographic and altimetric sea surface height (SSH) data, and relation to the in situ variation of the temperature minimum layer, i.e., the dichothermal layer, depth at station K2 (47^° N, 160^° E). The AGEM-based geostrophic volume transport and the streamfunction of the WSAG in the top 1000-dbar layer show that the gyre changes substantially. From the late 1990s to the mid-2000s, the gyre shrunk northward. Due to the shrinkage, the halocline bottom, which is equivalent to the top of the main pycnocline, deepens at K2 outside the central part of the gyre. The downward displacement of the dichothermal layer at K2 was found to be significantly related to that of the underlying halocline due to the northward shrinkage of the WSAG.     

Assessing impervious area ratios of grid-based land-use classifications on the example of an urban watershed

ABSTRACT

When applying a distributed hydrological model in urban watersheds, grid-based land-use classification data with 10 m resolution are typically used in Japan. For urban hydrological models, the estimation of the impervious area ratio (IAR) of each land-use classification is a crucial factor for accurate runoff analysis. In order to assess the IAR accurately, we created a set of vector-based “urban landscape GIS delineation” data for a typical urban watershed in Tokyo. By superimposing the vector-based delineation map on the grid-based map, the IAR of each grid-based land-use classification was estimated, after calculating the IARs of all grid cells in the entire urban watershed. As a result, we were able to calculate the frequency distribution of IAR for each land-use classification, as well as the spatial distribution of IARs for the urban watershed. It is evident from the results that the reference values of IAR for the land-use classifications were estimated very roughly and inherited errors of between about 7% and 70%, which corresponds to more than 100 mm increase of direct runoff for the 1500 mm annual average precipitation.

Editor D. Koutsoyiannis; Guest editor E. Volpi     

Backshore coarsening processes triggered by wave‐induced sand transport: the critical role of storm events

Spatial backshore processes were investigated through field observations of topography and median sand grain size at a sandy beach facing the Pacific Ocean in Japan. A comparison of the backshore profile and cross‐shore distribution of the median sand grain size in 1999 and 2004 revealed an unusual sedimentary process in which sand was coarsened in a depositional area in the 5‐year period, although sediment is generally coarsened in erosional areas. In support of these observations, monthly spatial field analyses carried out in 2004 demonstrated a remarkable backshore coarsening process triggered by sedimentation in the seaward part of the backshore during a storm event. In order to elucidate mechanisms involved in the backshore coarsening process, thresholds of movable sand grain size under wave and wind actions (a uniform parameter for both these cases) in the onshore and offshore directions were estimated using wave, tide, and wind data. The cross‐shore distributions of the estimated thresholds provided reasonable values and demonstrated a coarsening mechanism involving the intermediate zone around the shoreline under alternating wave and wind actions as a result of which coarse sand was transported toward the seaward part of the backshore by large waves during storms and then toward the landward part by strong onshore winds. The 5‐year backshore coarsening is most certainly explained by repetition of short‐term coarsening mechanisms caused by wave‐induced sand transport occurring from the nearshore to the intermediate zone. Copyright © 2010 John Wiley & Sons, Ltd     

Geographical distribution of helium isotope ratios in northeastern Japan

In order to study the precise geographical distribution of helium isotope ratios in northeastern Japan and compare it with geophysical data, we collected 43 gas and water samples from hot and mineral springs in the region where the ratio had never been reported, and measured the ³He/⁴He and ⁴He/²⁰Ne ratios of these samples. It was found that the ³He/⁴He ratios show clear contrasts between the forearc and the back-arc regions in the Tohoku district in northeastern Japan. In the forearc region, the ratios are smaller than 1 R_A (1 R_A = 1.4 × 10⁻⁶; R_A means the ³He/⁴He ratio of the atmosphere). On the other hand, those along the volcanic front and in the back-arc region are apparently higher. Moreover, we found a variation in the ³He/⁴He ratios along the volcanic front. In Miyagi Prefecture (38–39°N), the ratios range from 2 to 5 R_A. On the other hand, the ratios are less than 1 R_A in and around the southern border between Iwate and Akita Prefectures (39–39.5°N). Comparing the distribution of helium isotope ratios to results of recent geophysical studies, we found that the features in geographical distribution of helium isotope ratios are similar to those of seismic low-velocity zone distributions and high Qp⁻¹ distributions in the uppermost mantle. These observations strongly suggest that the helium isotope ratios reflect the distribution of melts in the uppermost mantle and are a useful tool for investigating the origin, behavior, and distribution of deep fluids and melts.     

Study on the fate of petroleum-derived polycyclic aromatic hydrocarbons (PAHs) and the effect of chemical dispersant using an enclosed ecosystem,mesocosm

Polycyclic Aromatic Hydrocarbons (PAHs) are one of the components found in oil and are of interest because some are toxic. We studied the environmental fate of PAHs and the effects of chemical dispersants using experimental 500 l mesocosm tanks that mimic natural ecosystems. The tanks were filled with seawater spiked with the water-soluble fraction of heavy residual oil. Water samples and settling particles in the tanks were collected periodically and 38 PAH compounds were analyzed by gas chromatography-mass spectrometry (GC-MS). Low molecular weight (LMW) PAHs with less than three benzene rings disappeared rapidly, mostly within 2 days. On the other hand, high molecular weight (HMW) PAHs with more than four benzene rings remained in the water column for a longer time, up to 9 days. Also, significant portions (10-94%) of HMW PAHs settled to the bottom and were caught in the sediment trap. The addition of chemical dispersant accelerated dissolution and biodegradation of PAHs, especially HMW PAHs. The dispersant amplified the amounts of PAHs found in the water column. The amplification was the greater for the more hydrophobic PAHs, with an enrichment factor of up to six times. The increased PAHs resulting from dispersant use overwhelmed the normal degradation and, as a result, higher concentrations of PAHs were observed in water column throughout the experimental period. We conclude that the addition of the dispersant could increase the concentration of water column PAHs and thus increase the exposure and potential toxicity for organisms in the natural environment. By making more hydrocarbon material available to the water column, the application of dispersant reduced the settling of PAHs. For the tank with dispersant, only 6% of chrysene initially introduced was detected in the sediment trap whereas 70% was found in the trap in the tank without dispersant.     

Quantitative approach for damage detection of reinforced concrete frames

The objective of this paper is to provide an analytical basis for the quantitative evaluation of damage to a reinforced concrete structure based on the vibration data obtained by using the damage detection technique. A partial reinforced concrete system of a weak beam/strong column moment frame is chosen as an example. A pushover analysis is carried out in order to numerically examine both the story shear-relative displacement characteristics and the associated damage level. In the analysis, a two dimensional nonlinear finite element analysis is employed considering several constitutive models. As a result, the degradation of the stiffness at the damaged story is characterized in association with the story relative displacement. It is also pointed out that the rotation angle of the column-base is highly correlated with the story relative displacement. Based on the analytical findings, quantitative approaches for a structural health monitoring system are suggested considering both the current sensor technologies and those available in the future. Supported by: Ministry of Education, Science, Sports and Culture, Grant-in-Aid for Scientific Research (Base Research (c) (1), Research No. 14550555)