排序方式: 共有76条查询结果,搜索用时 203 毫秒
31.
We describe and interpret the surface terrain types associated with a widely-reported ∼4 km long, mid-latitude martian viscous flow feature (VFF). The feature is located in the southern hemisphere, on the poleward-facing rim of a ∼60 km-diameter crater in eastern Hellas Planitia. High Resolution Imaging Science Experiment (HiRISE) images, analysed in both 2D and 3D, reveal that the upper margin of the feature is bounded by steep (∼30°) headwalls, typically some tens of metres high, that are formed from unconsolidated material and characterised by a series of slope-parallel linear incisions. Below these incised headwalls, the feature flows at a general angle of ∼10° from a broad upper basin to a confined lower tongue that is bounded by a nested sequence of elongate raised ridges. These characteristics are typical of several VFFs in the region and are strikingly similar to moraine-bounded valley glaciers on Earth, and we sub-classify this feature as a ‘glacier-like form’ (GLF)1. The GLF comprises five distinctive surface terrain types that contrast sharply with surface characteristics outside its bounding moraines. Four of these terrains (scaly terrain, polygonized terrain, linear terrain and mound-and-tail terrain) are located within the GLF’s innermost bounding moraine, while the fifth (rectilinear-ridge terrain) is located between its frontal moraines. These terrains are mapped, characterised and associated with possible mechanisms of formation to draw inferences about the GLF’s glaciology and glacial history. This analysis suggests that the GLF reached its maximal extent in the geologically-recent past, and that it may have been partially wet-based at that time. Subsequent to this phase, the GLF experienced an extended period of general recession that has been punctuated by several episodes of still-stand or advance. Currently, the GLF’s basin appears to be composed of a lower zone that is dominated by an exposed former glacier bed and an upper zone that may still contain a now-degraded and dust-mantled viscous mass, similar to many partially-glacierized basins on Earth. 相似文献
32.
Anil Kumar Yadav Anirudh Pradhan Ajay Kumar Singh 《Astrophysics and Space Science》2012,337(1):379-385
The present study deals with spatially homogeneous and totally anisotropic locally rotationally symmetric (LRS) Bianchi type
I cosmological model with variable G and Λ in presence of imperfect fluid. To get the deterministic model of Universe, we assume that the expansion (θ) in the model is proportional to shear (σ). This condition leads to A=ℓB
n
, where A, B are metric potential. The cosmological constant Λ is found to be decreasing function of time and it approaches a small positive
value at late time which is supported by recent Supernovae Ia (SN Ia) observations. Also it is evident that the distance modulus
curve of derived model matches with observations perfectly. 相似文献
33.
Evaluation of liquefaction potential hazard of Chennai city, India: using geological and geomorphological characteristics 总被引:1,自引:1,他引:0
According to the latest UNFA Report on state of world population 2007, unleashing the potential of urban growth by 2030, the urban population will rise to 5 billion or 60?% of the world population. Liquefaction in urban areas is dangerous phenomenon, which cause more damage to buildings and loss of human lives. Chennai, the capital city of the State Tamil Nadu in India, is one of the densely populated cities in the country. The city has experienced moderate magnitude earthquakes in the past and also categorized under moderate seismic hazard as per the Bureau of Indian Standards (BIS in Criteria for earthquake resistant design of structures; Bureau of Indian Standards, New Delhi, 1893 2001). A study has been carried out to evaluate the liquefaction potential of Chennai city using geological and geomorphological characteristics. The subsurface lithology and geomorphological maps were combined in the GIS platform for assessing the liquefaction potential. The liquefaction hazard broadly classified into three categories viz., liquefaction likely, possible and not likely areas. Mainly, the liquefaction likely areas spread along the coastal areas and around the river beds. The rest of the areas are liquefaction not likely and possible. The present map can be used as first-hand information on regional liquefaction potential for the city, and it will be help to the scientists, engineers and planners who are working for future site-specific studies of the city. 相似文献
34.
Babita Devi Smita Dubey Shailendra Saini Rajni Devi Rashmi Wahi Ajay Dhar S. K. Vijay A. K. Gwal 《Journal of Astrophysics and Astronomy》2008,29(1-2):275-280
This paper presents the effect of geomagnetic storm on geomagnetic field components at Southern (Maitri) and Northern (Kiruna) Hemispheres. The Indian Antarctic Station Maitri is located at geom. long. 66.03° S; 53.21° E whereas Kiruna is located at geom. long. 67.52° N; 23.38° E. We have studied all the geomagnetic storms that occurred during winter season of the year 2004–2005. We observed that at Southern Hemisphere the variation is large as compared to the Northern Hemisphere. Geomagnetic field components vary when the interplanetary magnetic field is oriented in southward direction. Geomagnetic field components vary in the main phase of the ring current. Due to southward orientation of vertical component of IMF reconnection takes place all across the dayside that transports plasma and magnetic flux which create the geomagnetic field variation. 相似文献
35.
Rajni Devi Smita Dubey Shailendra Saini Babita Devi Ajay Dhar S. K. Vijay A. K. Gwal 《Journal of Astrophysics and Astronomy》2008,29(1-2):281-286
A fluxgate digital magnetometer is used to study the variation of magnitude of H component during geomagnetic storm events of April, July and November 2004 at southern subauroral localized region at “MAITRI” (geom. lat. 62°S, long. 52.8°E). We also study the effect of vertical component of interplanetary magnetic field (IMF) on the variation of the magnitude of H component during storm time of April, July and November 2004. Results show that before sudden storm commencement (SSC) time magnitude of H component and IMF show smooth variation but after SSC of first storm of 22 July 2004, the magnitude of the H component shows fluctuations and at 09:00 UT it increases, but during second storm of 24 July 2004, the magnitude of H component indicates large fluctuations and it increases rapidly at 04:00 UT. 相似文献
36.
Shiv Mohan Singh Kumar Avinash Parmanand Sharma Ravindra Uttam Mulik Ajay Kumar Upadhyay Rasik Ravindra 《地学前缘(英文版)》2017,8(6):1339-1347
Cryoconite samples were collected from two different climatic domains i.e., the Sutri Dhaka glacier, western Himalaya India and Svalbard glaciers, the Spitsbergen, Arctic, to understand the elemental source and elemental deposition patterns. The data of geochemical analysis suggest that the Himalayan cryoconite samples accumulate higher concentrations as compared to the cryoconite samples of the Arctic glaciers. The concentration of lithophile elements (Cs, Li, Rb and U) was recorded higher in the cryoconite holes of the Himalayas, especially, in the lower to the higher parts of the glacier, whereas, lower concentrations were recorded in the Arctic samples. Chalcophile elements in the Himalayan cryoconites are enriched in As and Bi while the Arctic cryoconite samples show a higher concentration of Bi, Pb and As. The higher concentrations are responsible for influencing the ecosystem and in human health related issues. Siderophile elements (Co, Fe, Mn and Ni) show high concentrations in the Himalayan samples, whereas, the Arctic samples show minor variations and low elemental concentration in these elements, respectively. In addition, a few elements, such as Ag, Mg, and Ca show higher concentration in the Himalayan glacier samples. Ca also occurs in high concentrations in Arctic glacier samples. R-mode factor analysis of the Himalayas (Arctic) samples indicate that the elements are distributed in four (three) factors, explaining 89% (90%) of the variance in their elemental distribution. The Factor 1 suggests statistically significant positive loadings for most of the lithophile, chalcophile and siderophile elements of the “Himalayan” and the Arctic cryoconite samples. The sample-wise factor score distribution shows a considerable variation in the sampling locations along the glaciers of both the regions. Factors 2 and 3, demonstrate insignificant loading for most of the elements, except statistically significant positive loading in some of the elements of the both, Himalayan and Arctic “cryoconites”. The higher elemental concentration in the cryoconites of the Himalayan region may be an indicator of the natural processes and/or attributed to the rapid industrialization in the Asian countries. 相似文献
37.
Soil moisture is an integral quantity in hydrology that represents the average conditions in a finite volume of soil. In this paper, a novel regression technique called Support Vector Machine (SVM) is presented and applied to soil moisture estimation using remote sensing data. SVM is based on statistical learning theory that uses a hypothesis space of linear functions based on Kernel approach. SVM has been used to predict a quantity forward in time based on training from past data. The strength of SVM lies in minimizing the empirical classification error and maximizing the geometric margin by solving inverse problem. SVM model is applied to 10 sites for soil moisture estimation in the Lower Colorado River Basin (LCRB) in the western United States. The sites comprise low to dense vegetation. Remote sensing data that includes backscatter and incidence angle from Tropical Rainfall Measuring Mission (TRMM), and Normalized Difference Vegetation Index (NDVI) from Advanced Very High Resolution Radiometer (AVHRR) are used to estimate soil water content (SM). Simulated SM (%) time series for the study sites are available from the Variable Infiltration Capacity Three Layer (VIC) model for top 10 cm layer of soil for the years 1998–2005. SVM model is trained on 5 years of data, i.e. 1998–2002 and tested on 3 years of data, i.e. 2003–2005. Two models are developed to evaluate the strength of SVM modeling in estimating soil moisture. In model I, training and testing are done on six sites, this results in six separate SVM models – one for each site. Model II comprises of two subparts: (a) data from all six sites used in model I is combined and a single SVM model is developed and tested on same sites and (b) a single model is developed using data from six sites (same as model II-A) but this model is tested on four separate sites not used to train the model. Model I shows satisfactory results, and the SM estimates are in good agreement with the estimates from VIC model. The SM estimate correlation coefficients range from 0.34 to 0.77 with RMSE less than 2% at all the selected sites. A probabilistic absolute error between the VIC SM and modeled SM is computed for all models. For model I, the results indicate that 80% of the SM estimates have an absolute error of less than 5%, whereas for model II-A and II-B, 80% and 60% of the SM estimates have an error less than 10% and 15%, respectively. SVM model is also trained and tested for measured soil moisture in the LCRB. Results with RMSE, MAE and R of 2.01, 1.97, and 0.57, respectively show that the SVM model is able to capture the variability in measured soil moisture. Results from the SVM modeling are compared with the estimates obtained from feed forward-back propagation Artificial Neural Network model (ANN) and Multivariate Linear Regression model (MLR); and show that SVM model performs better for soil moisture estimation than ANN and MLR models. 相似文献
38.
39.
Results of compressibility and hydraulic conductivity testing performed under different levels of average vertical stress were used to determine the appropriate tire chips size (in particular aspect ratio) and tire chip—gravel random state mix combination. Proper sidewall treatment was provided to reduce side wall friction up to minimum level and constant head conditions were maintained with appropriate design flow rate. Results showed that tire chips (length 25 mm, aspect ratio 1) mixed with 40 mm gravel in the random state in mixing ratio of 3:1 (ds:dg) was observed to undergo minimum strain, maximum hydraulic conductivity and hence free drainage even under high vertical stress levels. By selecting tire chips of appropriate aspect ratio and optimum mix combination for the construction of drainage layer of MSW landfill leachate collection system lower strain response, higher hydraulic conductivity values and relatively free drainage even under anticipated higher vertical stress levels may be achieved. 相似文献
40.
Ajay Kumar A. S. Venkatesh P. V. Ramesh Babu S. Nayak 《Journal of the Geological Society of India》2012,79(3):279-286
Petrographic and EPMA studies reveal the presence of discrete grains of uraninite and pyrite are being reported for the first
time in quartz-pebble conglomerates from western margin of Bonai granite pluton, Sundargarh district, Orissa. Uraninite grains
(2–3 μ in size) are subrounded to muffin shaped which show variation in UO2 (63.86 to 71.73 wt %), ThO2 (5.48 to 6.42 wt %) and RE2O3 (1.57 to 2.23 wt %). Pegmatitic source of uraninite is revealed by comparing UO2, ThO2, PbO, CaO content and ratios of UO2/ThO2 and CaO/ThO2 in uraninites from pegmatite and other environments and areas. Subrounded to muffin shape of uraninite, their association
with subrounded pyrite and heavies like zircon, tourmaline, chromite, monazite, magnetite and their comparable chemistry with
well established quartzpebble conglomerates of India and world are indicative of their detrital origin. Pyrite, minor chalcopyrite
and rare galena are observed as sulphide phases in conglomerate. Variable shapes of pyrite, their low Co (up to 0.16 wt %)
and Ni contents (up to 0.09 wt %) and Co/Ni ratio less than 1.0 (mean= 0.63) favours sedimentary/diagenetic origin. 相似文献