厦门港浮游植物对磷酸盐吸收速率的研究

用无载体32P同位素示踪测定海水中浮游植物和细菌吸收磷酸盐速率的方法，对厦门港浮游植物和细菌进行了研究。结果表明，厦门港海水中吸收磷酸盐的主体是浮游植物（几乎占100％），平均吸收速率为4．28×10－5μmol／（L·s），并且存在着晚秋＜冬＜初春的季节变化，培养实验的结果表明吸收速率的季节变化主要是由于种类更替和温度效应所致。     

<Superscript>230</Superscript>Th/<Superscript>238</Superscript>U dating of hydrothermal sulfides from Duanqiao hydrothermal field,Southwest Indian Ridge

Duanqiao hydrothermal field is located between the Indomed and Gallieni fracture zones at the central volcano, at 50°28′E in the ultraslow-spreading Southwest Indian Ridge (SWIR). Twenty-eight subsamples from a relict chimney and massive sulfides were dated using the ²³⁰Th/²³⁸U method. Four main episodes of hydrothermal activity were determined according to the restricted results: 68.9–84.3, 43.9–48.4, 25.3–34.8, and 0.7–17.3 kyrs. Hydrothermal activity of Duanqiao probably started about 84.3 (±0.5) kyrs ago and ceased about 0.737 (±0.023) kyrs ago. The periodic character of hydrothermal activity may be related to the heat source provided by the interaction of local magmatism and tectonism. The estimated mean growth rate of the sulfide chimney is <0.02 mm/yr. This study is the first to estimate the growth rate of chimneys in the SWIR. The maximum age of the relict chimney in Duanqiao hydrothermal filed is close to that of the chimneys from Mt. Jourdanne (70 kyrs). The hydrothermal activity in Dragon Flag field is much more recent than that of Duanqiao or Mt. Jourdanne fields. The massive sulfides are younger than the sulfides from other hydrothermal fields such as Rainbow, Sonne and Ashadze-2. The preliminarily estimated reserves of sulfide ores of Duanqiao are approximately 0.5–2.9 million tons.     

Quantification of microcrack anisotropy in quartzite — a comparison between experimentally undeformed and deformed samples

In this paper, microcrack patterns in a quartzite are quantified using fractal geometry based methods. Since the quartzite does not show a mesoscopic foliation, the fabric was recognized using anisotropy of magnetic susceptibility (AMS) analysis. Microcracks were investigated in thin sections prepared along the three principal planes of the AMS ellipsoid. Point load tests were performed on cores drilled parallel as well as perpendicular to the magnetic foliation. After experimental deformation, thin sections were prepared in two orientations — (a) parallel to the plane of failure (i.e., parallel to the direction of loading), (b) perpendicular to the plane of failure (i.e., perpendicular to the direction of loading), and microcrack patterns in these sections were investigated. The box-counting method of fractal analysis was first applied to microcracks traced from SEM images from each thin section of the experimentally undeformed as well as deformed samples to establish the fractal nature of the microcrack pattern. It was found that in thin sections perpendicular to the direction of loading, the box (fractal) dimension tends to marginally increase. This is inferred as a manifestation of the increase in complexity of the pattern. The software AMOCADO, which is based on the modified Cantor Dust method of fractal analysis, was applied to microcrack pattern from each thin section in order to quantify the pattern anisotropy. It is noted that the anisotropy significantly reduces in sections perpendicular to the loading direction. SEM data are presented to demonstrate that this reduction in anisotropy is on account of generation and/or growth of new cracks in random orientations. It is envisaged that the approach adopted in this investigation maybe useful in rock mechanics and mineral-resource applications in future.     

面向地震巨灾保险的建筑特性快速提取方法

房屋建筑分类是抗震设计和地震风险分析的基础,是巨灾保险的纽带环节,也是结构易损性准确、完备分析的前驱保障,快速获取建筑特性参数非常关键。基于影像数据获取结构特性相比传统手段具有显著优势,然而其准确性具有一定挑战性,从影像数据得到实时的、较准确的结构特性成为地震保险数据获取技术的关注焦点。本文采用深度学习方法开展从影像数据中提取面向地震保险需求的建筑特性数据,构建基于深度学习方法的建筑高度识别模型和基于机器视觉的建筑高度识别方法,运用基于Xception神经网络深度学习和机器视觉的模型,对北京地区的建筑高度进行模型测试,该方法可为地震保险分析提供重要的基础数据支持。     

Antiangiogenic activity of low-temperature lysozyme from a marine bacterium <Emphasis Type="Italic">in vivo</Emphasis> and <Emphasis Type="Italic">in vitro</Emphasis>

We extracted marine low-temperature lysozyme (MLTL), a novel lysozyme, from a marine microorganism through fermentation. Our previous study suggested that a low molecular weight (16 kDa) may exert anti-tumor activity through antiangiogenesis. In this study, we extracted a high weight (39 kDa) and investigated its antiangiogenic activity in vivo and in vitro. Using zebrafish embryos as an in vivo study model, we found that treatment with MLTL significantly inhibited the growth of subintestinal vessels (SIVs) in a dose-dependent manner and that 400 μg/ml MLTL was sufficient to block the growth of SIVs. An in vitro study conducted using human umbilical vein endothelial cells (HUVECs) revealed that MLTL suppressed the proliferation, migration and tube formation of HUVECs in a dose-dependent manner. Interestingly, assays by flow cytometry and DNA electrophoresis indicated that MLTL was able to induce apoptosis of HUVECs. Moreover, further study demonstrated that the disruption of intracellular Ca²⁺ homeostasis may play an important role in MLTL induced apoptosis of HUVECs. Taken together, the results of this study demonstrate for the first time that MLTL inhibits angiogenesis through its pleiotropic effects on vascular endothelial cells and induces apoptosis through regulation of cellular Ca²⁺ levels. The results of this study also revealed a possible mechanism underlying the antiangiogenic effect of MLTL and suggested that MLTL may be a promising new antiangiogenic agent for use in cancer therapy.     

Impacts of future climate change on agroclimatic resources in Northeast China

In this study, the spatial distribution and changing trends of agricultural heat and precipitation resources in Northeast China were analyzed to explore the impacts of future climate changes on agroclimatic resources in the region. This research is based on the output meteorological data from the regional climate model system for Northeast China from 2005 to 2099, under low and high radiative forcing scenarios RCP4.5 (low emission scenario) and RCP8.5 (high emission scenario) as proposed in IPCC AR5. Model outputs under the baseline scenario, and RCP4.5 and RCP8.5 scenarios were assimilated with observed data from 91 meteorological stations in Northeast China from 1961 to 2010 to perform the analyses. The results indicate that: (1) The spatial distribution of temperature decreases from south to north, and the temperature is projected to increase in all regions, especially under a high emission scenario. The average annual temperature under the baseline scenario is 7.70°C, and the average annual temperatures under RCP4.5 and RCP8.5 are 9.67°C and 10.66°C, respectively. Other agricultural heat resources change in accordance with temperature changes. Specifically, the first day with temperatures ≥10°C arrives 3 to 4 d earlier, the first frost date is delayed by 2 to 6 d, and the duration of the growing season is lengthened by 4 to 10 d, and the accumulated temperature increases by 400 to 700°C·d. Water resources exhibit slight but not significant increases. (2) While the historical temperature increase rate is 0.35°C/10a, the rate of future temperature increase is the highest under the RCP8.5 scenario at 0.48°C/10a, compared to 0.19°C/10a under the RCP4.5 scenario. In the later part of this century, the trend of temperature increase is significantly faster under the RCP8.5 scenario than under the RCP4.5 scenario, with faster increases in the northern region. Other agricultural heat resources exhibit similar trends as temperature, but with different specific spatial distributions. Precipitation in the growing season generally shows an increasing but insignificant trend in the future, with relatively large yearly fluctuations. Precipitation in the eastern region is projected to increase, while a decrease is expected in the western region. The future climate in Northeast China will change towards higher temperature and humidity. The heat resource will increase globally, however its disparity with the change in precipitation may negatively affect agricultural activities.     

Application of 2D numerical model to unsteady performance evaluation of vertical-axis tidal current turbine

Tidal current energy is renewable and sustainable, which is a promising alternative energy resource for the future electricity supply. The straight-bladed vertical-axis turbine is regarded as a useful tool to capture the tidal current energy especially under low-speed conditions. A 2D unsteady numerical model based on Ansys-Fluent 12.0 is established to conduct the numerical simulation, which is validated by the corresponding experimental data. For the unsteady calculations, the SST model, 2×10~5 and 0.01 s are selected as the proper turbulence model, mesh number, and time step, respectively. Detailed contours of the velocity distributions around the rotor blade foils have been provided for a flow field analysis. The tip speed ratio(TSR) determines the azimuth angle of the appearance of the torque peak, which occurs once for a blade in a single revolution. It is also found that simply increasing the incident flow velocity could not improve the turbine performance accordingly. The peaks of the averaged power and torque coefficients appear at TSRs of 2.1 and 1.8, respectively. Furthermore, several shapes of the duct augmentation are proposed to improve the turbine performance by contracting the flow path gradually from the open mouth of the duct to the rotor. The duct augmentation can significantly enhance the power and torque output. Furthermore, the elliptic shape enables the best performance of the turbine. The numerical results prove the capability of the present 2D model for the unsteady hydrodynamics and an operating performance analysis of the vertical tidal stream turbine.     

Seismic stratigraphy of Lago Puyehue (Chilean Lake District): new views on its deglacial and Holocene evolution

Prior to the collection of a series of sediment cores, a high- and very-high-resolution reflection seismic survey was carried out on Lago Puyehue, Lake District, South-Central Chile. The data reveal a complex bathymetry and basin structure, with three sub-basins separated by bathymetric ridges, bedrock islands and interconnected channels. The sedimentary infill reaches a thickness of >200 m. It can be sub-divided into five seismic-stratigraphic units, which are interpreted as: moraine, ice-contact or outwash deposits (Unit I), glacio-lacustrine sediments rapidly deposited in a proglacial or subglacial lake at the onset of deglaciation (Unit II), lacustrine fan deposits fed by sediment-laden meltwater streams in a proglacial lake (Unit III), distal deposits of fluvially derived sediment in an open, post-glacial lake (Unit IV) and authigenic lacustrine sediments, predominantly of biogenic origin, that accumulated in an open, post-glacial lake (Unit V). This facies succession is very similar to that observed in other glacial lakes, and minor differences are attributed to an overall higher depositional energy and higher terrigenous input caused by the strong seismic and volcanic activity in the region combined with heavy precipitation. A long sediment core (PU-II core) penetrates part of Unit V and its base is dated as 17,915 cal. yr. BP. Extrapolation of average sedimentation rates yields an age of ca. 24,750 cal. yr. BP for the base of Unit V, and of ca. 28,000 cal. yr. BP for the base of Unit IV or for the onset of open-water conditions. This is in contrast with previous glacial-history reconstructions based on terrestrial records, which date the complete deglaciation of the basin as ca. 14,600 cal. yr. BP. This discrepancy cannot be easily explained and highlights the need for more lacustrine records from this region. This is the second in a series of eight papers published in this special issue dedicated to the 17,900 year multi-proxy lacustrine record of Lago Puyehue, Chilean Lake District. The papers in this special issue were collected by M. De Batist, N. Fagel, M.-F. Loutre and E. Chapron.     

Effect of upward internal flow on dynamics of riser model subject to shear current

Numerical study about vortex-induced vibration(VIV) related to a flexible riser model in consideration of internal flow progressing inside has been performed.The main objective of this work is to investigate the coupled fluid-structure interaction(FSI) taking place between tensioned riser model,external shear current and upward-progressing internal flow(from ocean bottom to surface).A CAE technology behind the current research which combines structural software with the CFD technology has been proposed.According to the result from dynamic analysis,it has been found that the existence of upward-progressing internal flow does play an important role in determining the vibration mode(/dominant frequency),vibration intensity and the magnitude of instantaneous vibration amplitude,when the velocity ratio of internal flow against external current is relatively high.As a rule,the larger the velocity of internal flow is,the more it contributes to the dynamic vibration response of the flexible riser model.In addition,multi-modal vibration phenomenon has been widely observed,for asymmetric curvature along the riser span emerges in the case of external shear current being imposed.     

Assessment of prospective hazards resulting from the 2017 earthquake at the world heritage site Jiuzhaigou Valley,Sichuan, China

On August 8, 2017, a Ms = 7.0 magnitude earthquake occurred in the Jiuzhaigou Valley, in Sichuan Province, China(N: 33.20°, E: 103.82°). Jiuzhaigou Valley is an area recognized and listed as a world heritage site by UNESCO in 1992. Data analysis and field survey were conducted on the landslide, collapse, and debris flow gully, to assess the coseismic geological hazards generated by the earthquake using an unmanned aerial vehicle(UAV), remote-sensing imaging, laser range finders, geological radars, and cameras. The results highlighted the occurrence of 13 landslides, 70 collapses, and 25 potential debris flow gullies following the earthquake. The hazards were classified on the basis of their size and the potential property loss attributable to them. Consequently, 14 large-scale hazards, 30 medium-sized hazards, and 64 small hazards accounting for 13%, 28%, and 59% of the total hazards, respectively, were identified. Based on the variation tendency of the geological hazards that ensued in areas affected by the Kanto earthquake(Japan), Chi-chi earthquake(Taiwan China), and Wenchuan earthquake(Sichuan China), the study predicts that, depending on the rain intensity cycle, the duration of geological hazard activities in the Jiuzhaigou Valley may last over ten years and will gradually decrease for the following five to ten yearsbefore returning to pre-earthquake levels. Thus,necessary monitoring and early warning systems must be implemented to ensure the safety of residents,workers and tourists during the construction of engineering projects and reopening of scenic sites to the public.