Description of the post larva of star pipefish,halicampus punctatus (syngnathidae, gasterosteiformes) first found in the southwestern east sea, Korea

Larval specimens ofHalicampus punctatus were collected off Ulsan and Uljin in December 2002 (three specimens) and off Ulsan in December 2003 (one specimen). These specimens are characterized by the following morphological characteristics: rings, 14 + 35 = 49; subdorsal rings, 1 + 3 = 4; dorsal fin rays, 19 – 20; pectoral fin rays, 14 – 15; anal fin rays, 9; head length (HL), 5.8 – 6.7 in the standard length; snout length, 1.9 in HL; snout depth, 3.7 – 5.2 in snout length. The number of caudal fin rays 9 is less than those of the other species in the same genus 10. Wide stripe bands composed of small pigments are shown in the trunk and the tail. Melanophores are not found in the dorsal fin, the pectoral fin, and the anal fin except the caudal fin. The supraoccipital crest is on the head. The frontal ridge is on the dorsal side of front trunk. The blanched ridges on the opercular are fused with a main ridge like a tree branch. A few branched ridges that are small and narrow on the trunk and the tail are fused with the main ridges. We report these specimens as the first record in Korea and name them ‘Byeol-silgo-ki’ in Korean.     

Generation of random waves in time-dependent extended mild-slope equations using a source function method

We develop techniques of numerical wave generation in the time-dependent extended mild-slope equations of Suh et al. [1997. Time-dependent equations for wave propagation on rapidly varying topography. Coastal Engineering 32, 91–117] and Lee et al. [2003. Extended mild-slope equation for random waves. Coastal Engineering 48, 277–287] for random waves using a source function method. Numerical results for both regular and irregular waves in one and two horizontal dimensions show that the wave heights and the frequency spectra are properly reproduced. The waves that pass through the wave generation region do not cause any numerical disturbances, showing usefulness of the source function method in avoiding re-reflection problems at the offshore boundary.     

A comparison of several wave spectra for the random wave diffraction by a semi-infinite breakwater

A comparison of the diffraction of multidirectional random waves using several selected wave spectrum models is presented in this paper. Six wave spectrum models, Bretschneider, Pierson–Moskowitz, ISSC, ITTC, Mitsuyasu, and JONSWAP spectrum, are considered. A discrete form for each of the given spectrum models is used to specify the incident wave conditions. Analytical solutions based on both the Fresnel integrals and polynomial approximations of the Fresnel integrals and numerical solutions of a boundary integral approach have been used to obtain the two-dimensional wave diffraction by a semi-infinite breakwater at uniform water depth. The diffraction of random waves is based on the cumulative superposition of linear diffraction solution. The results of predicted random wave diffraction for each of the given spectrum models are compared with those of the published physical model presented by Briggs et al. [1995. Wave diffraction around breakwater. Journal of Waterway, Port, Coastal and Ocean Engineering—ASCE 121(1), 23–35]. Reasonable agreement is obtained in all cases. The effect of the directional spreading function is also examined from the results of the random wave diffraction. Based on these comparisons, the present model for the analysis of various wave spectra is found to be an accurate and efficient tool for predicting the random wave field around a semi-infinite breakwater or inside a harbor of arbitrary geometry in practical applications.     

Experimental studies on the slowly varying drift motion of a berthed container ship model

The effects of free-surface waves on the floating structures are of great importance in the offshore industry. Among the six degrees of motions of a surface ship the absence of restoring forces in surge, sway and yaw led to critical situations for moored ships in the recent times. The order of forces in horizontal plane and their exciting frequencies are matters of interest. The resonance with the presence of moored chains led to many accidents in the recent past. The lines in dry conditions may not give good damping and in wet condition they may trigger the system to chaotic motions and jumps. Two different loading conditions of a container ship model are tested with waves in laboratory conditions in two different drafts. The mooring lines are chosen as per scale law and the energy under the response spectrum is determined from the plots. The results give new insights into the movement of a berthed ships subjected to waves. Response of the moored ship to different loading conditions in different water depths are discussed in this paper. The paper gives the order of energy due to first-order and slowly varying movement of a berthed container model in a towing tank.     

How are large western hemisphere warm pools formed?

During the boreal summer the Western Hemisphere warm pool (WHWP) stretches from the eastern North Pacific to the tropical North Atlantic and is a key feature of the climate of the Americas and Africa. In the summers following nine El Niño events during 1950–2000, there have been five instances of extraordinarily large warm pools averaging about twice the climatological annual size. These large warm pools have induced a strengthened divergent circulation aloft and have been associated with rainfall anomalies throughout the western hemisphere tropics and subtropics and with more frequent hurricanes. However, following four other El Niño events large warm pools did not develop, such that the mere existence of El Niño during the boreal winter does not provide the basis for predicting an anomalously large warm pool the following summer.In this paper, we find consistency with the hypothesis that large warm pools result from an anomalous divergent circulation forced by sea surface temperature (SST) anomalies in the Pacific, the so-called atmospheric bridge. We also find significant explanations for why large warm pools do not always develop. If the El Niño event ends early in the eastern Pacific, the Pacific warm anomaly lacks the persistence needed to force the atmospheric bridge and the Atlantic portion of the warm pool remains normal. If SST anomalies in the eastern Pacific do not last much beyond February of the following year, then the eastern North Pacific portion of the warm pool remains normal. The overall strength of the Pacific El Niño does not appear to be a critical factor. We also find that when conditions favor a developing atmospheric bridge and the winter atmosphere over the North Atlantic conforms to a negative North Atlantic Oscillation (NAO) pattern (as in 1957–58 and 1968–69), the forcing is reinforced and the warm pool is stronger. On the other hand, if a positive NAO pattern develops the warm pool may remain normal even if other circumstances favor the atmospheric bridge, as in 1991–92. Finally, we could find little evidence that interactions internal to the tropical Atlantic are likely to mitigate for or against the formation of the largest warm pools, although they may affect smaller warm pool fluctuations or the warm pool persistence.     

Barotropic tidal mixing effects in a coupled climate model: Oceanic conditions in the Northern Atlantic

Impacts of mixing driven by barotropic tides in a coupled climate model are investigated by using an atmosphere–ocean–ice–land coupled climate model, the GFDL CM2.0. We focus on oceanic conditions of the Northern Atlantic. Barotropic tidal mixing effects increase the surface salinity and density in the Northern Atlantic and decrease the RMS error of the model surface salinity and temperature fields related to the observational data.     

Acoustic monitoring using bamboo set net in the Southern Sea of Korea

High-temporal resolution profiles of acoustic backscatter were collected from a traditional bamboo set net along the coast of the Southern Sea, Korea, using sideward-looking multi-beam imaging sonar. These data were used to examine the impact of variations in tidal cycles and current speeds on the bamboo set net. The relatively high influx of fish during the nighttime compared to the low influx and high outflux of fish during the daytime suggests visual avoidance of the net by the fish during the daytime. The observed diel variation in the captured fish flux was significantly correlated with the current speed (day: r = 0.35, p = 0.002, night: r = 0.60, p < 0.001). The ratio of influx and outflux of fish, and current speed were correlated in a linear relationship (day: r = 0.45, p < 0.001; night: r = 0.56, p < 0.001). The fish activity of those inhabiting the bamboo set nets appears to be greatly influenced by day-night differences and current speed. The present study enhances understanding of fish behavior via utilization of a bamboo set net in the coastal zone.     

Appraisal of storm beach buffer width for cyclonic waves

The loss of beach sand from berm and dune due to high waves and surge is a universal phenomenon associated with sporadic storm activities. To protect the development in a coastal hazard zone, hard structures or coastal setback have been established in many countries around the world. In this paper, the requirement of a storm beach buffer, being a lesser extent landward comparing with the coastal setback to ensure the safety of infrastructures, is numerically assessed using the SBEACH model for three categories of wave conditions in terms of storm return period, median sand grain size, berm width, and design water level. Two of the key outputs from the numerical calculations, berm retreat and bar formation offshore, are then analysed, as well as beach profile change. After having performed a series of numerical studies on selected large wave tank (LWT) test results with monochromatic waves using SBEACH, we may conclude that: (1) Berm erosion increases and submerged bar develops further offshore as the storm return period increases for beach with a specific sand grain size, or as the sand grain reduces on a beach under the action of identical wave condition; (2) Higher storm waves yield a large bar to form quicker and subsequently cause wave breaking on the bar crest, which can reduce the wave energy and limit the extent of the eroding berm; (3) A larger buffer width is required for a beach comprising small sand grain, in order to effectively absorb storm wave energy; and (4) Empirical relationships can be tentatively proposed to estimate the storm beach buffer width, from the input of wave conditions and sediment grain size. These results would benefit a beach nourishment project for shore protection or design of a recreational beach.     

Environmentally associated spatial changes of a macrozoobenthic community in the Saemangeum tidal flat,Korea

Estuarine tidal flats are both ecologically and economically important, hence developing methods to reliably measure ecosystem health is essential. Because benthic fauna play a central role in the food web of tidal flats, in this study we set out to quantitatively describe the intertidal zonation of macro-invertebrates and their associations with specific environmental parameters along three transects in the Saemangeum tidal flat, Korea. The abundance and biomass of intertidal fauna with respect to five environmental parameters (i.e., shore level, mud content, coarse sand content, water content, and organic content) were measured, to identify environmental factors that influence macrofaunal distribution in intertidal soft bottom habitats. A total of 75 species were identified, with dominant species showing distinct zones of distribution along all transects. The number of species recorded in each transect was found to be dependent on sediment characteristics and salinity. Cluster analysis classified the entire study area into three faunal assemblages (i.e., location groups), which were delineated by characteristic species, including (A) ‘Periserrula–Macrophthalmus’, (B) ‘Umbonium–Meretrix’, and (C) ‘Prionospio–Potamocorbula’. Four environmental variables (i.e., shore level, water content, mud content, and organic content) appeared to determine factors that distinguished the three faunal assemblages, based on the discriminant analysis. The faunal assemblage types of the sampled locations were accurately predicted from environmental variables in two discriminant functions, with a prediction accuracy of 98%. It should be noted that the zonation of benthos in the lower section (C) of Sandong had been affected by the construction of a nearby dike, while this parameter had remained essentially unchanged at the other two location groups (A–B). Overall, the zonation of benthos from the Saemangeum tidal flat was explained adequately by the measured environmental variables, implying that faunal assemblages are closely associated with certain combinations of abiotic factors. The identification of such reliable associations may facilitate the development of statistical models to predict faunal distributions based on environmental variables at both local and regional scales. The entire study area was embanked in 2006 (one year after this study), and an integrated plan was set into force to develop claimed land into industrial, residential and agricultural districts, which also included a partial restoration program of the tidal flats located near to the study area.     

Evaluation of Bearing Capacity for Multi-Layered Clay Deposits with Geosynthetic Reinforcement using Discrete Element Method

A stability analysis of reinforced foundation soil is presented in this paper. A method based on the discrete element method (DEM) is suggested for calculating the bearing capacity on strip footings over multilayer soils reinforced with a horizontal layer of geosynthetics. The proposed method can estimate the ultimate bearing capacity and the distribution of tensile force developed in the geosynthetics of the footing system by Winkler springs to account for the compatibility between soil blocks and tensile elements to consider the tensile behavior between soil and geosynthetics. For footings on various multilayer soils with or without reinforcement of geosynthetics, the results of the method were compared to the field test results as well as to those obtained by various methods proposed by other researchers.